Epson Powerlite S1+ Quick Setup Manual

Choosing a location
The projector supports 4 viewing setups. Choose the best one for
your environment. If you install the projector in a rear or overhead
position, you’ll need to choose the correct projection option,
identified below, from the Setting menu. See the User’s Guide
on your CD-ROM for instructions.
Table
Convenient for temporary front projection.
Choose Frontfrom the menu.
Ceiling
Professional installation recommended. 
Choose Front/Ceilingfrom the menu.
Rear
For permanent installation behind...

Choosing a location
The projector supports 4 viewing setups. Choose the best one for
your environment. If you install the projector in a rear or overhead
position, you’ll need to choose the correct projection option,
identified below, from the Setting menu. See the User’s Guide
on your CD-ROM for instructions.
Table
Convenient for temporary front projection.
Choose Frontfrom the menu.
Ceiling
Professional installation recommended. 
Choose Front/Ceilingfrom the menu.
Rear
For permanent installation behind...

Choosing a location
The projector supports 4 viewing setups. Choose the best one for 
your environment. If you install the projector in a rear or overhead
position, you’ll need to choose the correct projection option,
identified below, from the Setting menu. See the User’s Guide
on your CD-ROM for instructions.
T able
Convenient for temporary front projection.
Choose  Frontfrom the menu.
Ceiling
Professional installation recommended. 
Choose  Front/Ceiling from the menu.
Rear
For permanent installation...

5Adjust the image
1To raise the image, press the foot adjust buttons and lift the front
of the projector. Release the buttons to lock the feet in the position
you want. 
To straighten the image, raise or lower an individual foot. 
2Rotate the focus ring to sharpen the image.
3If your image looks like      or      , first make sure the projector
is facing the screen squarely. Then, if necessary, press the     and
buttons on the projector’s control panel until the image is corrected.
4To select the best...

5Adjust the image
1To raise the image, press the foot adjust buttons and lift the front
of the projector. Release the buttons to lock the feet in the position
you want. 
To straighten the image, raise or lower an individual foot. 
2Rotate the focus ring to sharpen the image.
3If your image looks like      or      , first make sure the projector
is facing the screen squarely. Then, if necessary, press the     and
buttons on the projector’s control panel until the image is corrected.
4To select the best...

5Adjust the image
1To raise the image, press the foot adjust buttons and lift the front
of the projector. Release the buttons to lock the feet in the position
you want. 
To straighten the image, raise or lower an individual foot. 
2Rotate the focus ring to sharpen the image.
3If your image looks like      or      , first make sure the projector
is facing the screen squarely. Then, if necessary, press the     and
buttons on the projector’s control panel until the image is corrected.
4To select the best...