Epson Powerlite Pro Z8050wnl Quick Reference Manual
Have a look at the manual Epson Powerlite Pro Z8050wnl Quick Reference Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
PowerLite® Pro Z8000WUNL/Z8050WNL Quick Reference Epson, Instant Off, and Quick Corner are registered trademarks and Epson Exceed Your Vision is a registered logomark of Seiko Epson Corporation. PowerLite and PrivateLine are registered trademarks of Epson America, Inc. General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks. This information is subject to change without notice. © 2009 Epson America, Inc. 10/09 CPD-27504R1 Printed in XXXXXX This Quick Reference card gives brief instructions on connecting your PowerLite projector and using common features. For details, install and view the User’s Guide from the projector’s CD-ROM. Remote Control Map Turn the projectoron and offSwitch image sources 4118216 Rev.0 4118216 Rev.0 4118216 Rev.0 4118216 Rev.0 1-F C 1-F M 1-F Y 1-F K Replacement Parts Product Part Number Replacement lamp one-pack (ELPLP51) V13H010L51 Replacement lamp two-pack (ELPLP52) V13H010L52 Air filter V13H134A23 You can purchase replacement parts from an Epson authorized reseller. See “Where to Get Help” inside this card for more information. Select a source Open projector menus Navigate through menu settings; move pointer Select menu settings Change slides in PowerPoint® (optional wireless mouse receiver required) Temporarily turn off display Automatically adjust computer image Change the aspect ratio Adjust image position Display on-screen help Remote control ID switch Select an image projected over a network (Z8050WNL only) Open menus assigned by user Cancel current operation or return to previous menu Activate screen pointer Enlarge part of an image Freeze the image Select from 7 color modes Use numeric keys to enter passwords, IP settings, etc. Enter passwords Reduce or enlarge image Component-to-VGA cable (optional) S-Video cable (optional) Component-to-VGA cable (optional) Composite video cable (BNC) (optional) HDMI cable (optional)DVI-D cable (optional) VGA cable Note: The illustration above shows the PowerLite Pro Z8000WUNL. If you are using the PowerLite Pro Z8050WNL, the projector and interfaces are slightly different.
Switching Between Image Sources Press the Search button (remote control), one of the Source buttons (remote control), or the Source Search button (projector). Adjusting Image Position Press the Lens Shift button (remote control) or Lens button (projector) until Adjust Lens Shift is displayed on the screen. To adjust the position, use the button (remote control) or arrow buttons (projector). Press the button repeatedly to make fine adjustments. Press and hold the button to make larger adjustments. If the projector is on a table, you can level the image by turning any of the projector’s adjustable feet. Correcting Image Shape If your image looks like or , press the or button on the projector to correct it. If your image looks likeor, press the or button to correct it. If your image is uneven on all sides, you can use Quick Corner® to adjust the shape. See the on-screen User’s Guide. Changing the Aspect Ratio Press the Aspect button on the remote control to change the aspect ratio. For images input through the Computer port, select Normal to automatically resize the image. Turning the Projector Off Press the power button to turn the projector off. At the confirmation message, press the power button again. Note: If the Direct Power On function is enabled, you can unplug the projector or flip the switch controlling the outlet to which the projector is connected instead. To turn on this feature, see the on-screen User’s Guide. With Epson’s Instant Off® technology, you don’t have to wait for the projector to cool down; just turn it off or unplug it when you’re done. Installing the Manuals 1. Insert the projector CD in your computer’s CD or DVD drive. (Double-click the Epson installer icon, if necessary.) 2. Select your language, select your projector model, and follow the instructions on the screen to register. Then click Projector User’s Guides to install the manual(s). (If you are using Windows® and you don’t have Adobe® Reader®, click Adobe Reader to install it also.) Then click Exit. 3. To view the manuals, double- click the PL Pro Z8000WUNL_ Z8050WNL Guide, Network Operation Guide (for PowerLite Pro Z8050WNL users only), or EasyMP Monitor Operation Guide (for Windows users only) icon on your computer’s desktop. Turning the Projector On 1. Turn on your computer or image source. 2. Make sure you’ve installed the lens (not included), then remove the lens cover. (See the instructions that came with the lens for more information.) 3. Press the power button. After the power light stays green, the projector is ready. Note: If the Direct Power On function is enabled, you can turn the projector on without pressing the power button; just plug it in or flip the switch controlling the outlet to which the projector is connected. To turn on this feature, see the on-screen User’s Guide. 4. If your image does not appear, see “Switching Between Image Sources” or “Troubleshooting.” Mac OS® X From the Apple® menu, select System Preferences, Display or Displays, Detect Displays, VGA Display or Color LCD, and Arrangement or Arrange. Then select Mirror Displays. Where to Get Help Internet support Visit epson.com/support where you can download utilities and documentation, get FAQs and troubleshooting advice, or e-mail Epson. Speak to a support representative To use the Epson PrivateLine® Support service, call (800) 637-7661 and enter the PIN on the included Epson PrivateLine Support card. This service is available 6 AM to 6 PM, Pacific Time, Monday through Friday, for the duration of your warranty period. You may also speak with a projector support specialist by dialing one of the following numbers. U.S.: (562) 276-4394, 6 AM to 6 PM, Pacific Time, Monday-Friday Canada: (905) 709-3839, 6 AM to 6 PM, Pacific Time, Monday-Friday Days and hours of support are subject to change without notice. Toll or long distance charges may apply. Purchase supplies and accessories You can purchase screens and other accessories from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online at www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales). 4118216 Rev.0 4118216 Rev.0 4118216 Rev.0 4118216 Rev.0 1-B C 1-B M 1-B Y 1-B K Focusing the Image Press the Focus button (remote control) or Lens button (projector) until Adjust Focus is displayed on the screen. To adjust the focus, use the button (remote control) or the arrow buttons (projector). Zooming the image Press the Zoom button (remote control) or Lens button (projector) until Adjust Zoom is displayed on the screen. To reduce/enlarge the image, use the button (remote control) or the arrow buttons (projector). Troubleshooting If you see a blank screen or the message No signal Make sure the power light on the projector is green and not flashing, and the lens cover is removed. Make sure the cables are connected correctly. See the on-screen User’s Guide. You may need to change the image source. See “Switching Between Image Sources.” (Also make sure the source device is turned on.) If the projector and the notebook don’t display the same image Windows Press the function key on your keyboard that lets you display on an external monitor (allow a few seconds for the projector to sync up after you press the key). It may be labeled CRT/ LCD or have a icon, and you may have to hold down the Fn key while pressing it. If that doesn’t work, open the Display utility in the Windows Control Panel (in Windows Vista®, right-click on the desktop and select Personalize, then select Display Settings). Next, click Settings and Advanced or Advanced Settings. Make sure the external monitor port is set as your primary display and/or enabled. See your computer’s documentation or online help for details.
Switching Between Image Sources Press the Search button (remote control), one of the Source buttons (remote control), or the Source Search button (projector). Adjusting Image Position Press the Lens Shift button (remote control) or Lens button (projector) until Adjust Lens Shift is displayed on the screen. To adjust the position, use the button (remote control) or arrow buttons (projector). Press the button repeatedly to make fine adjustments. Press and hold the button to make larger adjustments. If the projector is on a table, you can level the image by turning any of the projector’s adjustable feet. Correcting Image Shape If your image looks like or , press the or button on the projector to correct it. If your image looks likeor, press the or button to correct it. If your image is uneven on all sides, you can use Quick Corner® to adjust the shape. See the on-screen User’s Guide. Changing the Aspect Ratio Press the Aspect button on the remote control to change the aspect ratio. For images input through the Computer port, select Normal to automatically resize the image. Turning the Projector Off Press the power button to turn the projector off. At the confirmation message, press the power button again. Note: If the Direct Power On function is enabled, you can unplug the projector or flip the switch controlling the outlet to which the projector is connected instead. To turn on this feature, see the on-screen User’s Guide. With Epson’s Instant Off® technology, you don’t have to wait for the projector to cool down; just turn it off or unplug it when you’re done. Installing the Manuals 1. Insert the projector CD in your computer’s CD or DVD drive. (Double-click the Epson installer icon, if necessary.) 2. Select your language, select your projector model, and follow the instructions on the screen to register. Then click Projector User’s Guides to install the manual(s). (If you are using Windows® and you don’t have Adobe® Reader®, click Adobe Reader to install it also.) Then click Exit. 3. To view the manuals, double- click the PL Pro Z8000WUNL_ Z8050WNL Guide, Network Operation Guide (for PowerLite Pro Z8050WNL users only), or EasyMP Monitor Operation Guide (for Windows users only) icon on your computer’s desktop. Turning the Projector On 1. Turn on your computer or image source. 2. Make sure you’ve installed the lens (not included), then remove the lens cover. (See the instructions that came with the lens for more information.) 3. Press the power button. After the power light stays green, the projector is ready. Note: If the Direct Power On function is enabled, you can turn the projector on without pressing the power button; just plug it in or flip the switch controlling the outlet to which the projector is connected. To turn on this feature, see the on-screen User’s Guide. 4. If your image does not appear, see “Switching Between Image Sources” or “Troubleshooting.” Mac OS® X From the Apple® menu, select System Preferences, Display or Displays, Detect Displays, VGA Display or Color LCD, and Arrangement or Arrange. Then select Mirror Displays. Where to Get Help Internet support Visit epson.com/support where you can download utilities and documentation, get FAQs and troubleshooting advice, or e-mail Epson. Speak to a support representative To use the Epson PrivateLine® Support service, call (800) 637-7661 and enter the PIN on the included Epson PrivateLine Support card. This service is available 6 AM to 6 PM, Pacific Time, Monday through Friday, for the duration of your warranty period. You may also speak with a projector support specialist by dialing one of the following numbers. U.S.: (562) 276-4394, 6 AM to 6 PM, Pacific Time, Monday-Friday Canada: (905) 709-3839, 6 AM to 6 PM, Pacific Time, Monday-Friday Days and hours of support are subject to change without notice. Toll or long distance charges may apply. Purchase supplies and accessories You can purchase screens and other accessories from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online at www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales). 4118216 Rev.0 4118216 Rev.0 4118216 Rev.0 4118216 Rev.0 1-B C 1-B M 1-B Y 1-B K Focusing the Image Press the Focus button (remote control) or Lens button (projector) until Adjust Focus is displayed on the screen. To adjust the focus, use the button (remote control) or the arrow buttons (projector). Zooming the image Press the Zoom button (remote control) or Lens button (projector) until Adjust Zoom is displayed on the screen. To reduce/enlarge the image, use the button (remote control) or the arrow buttons (projector). Troubleshooting If you see a blank screen or the message No signal Make sure the power light on the projector is green and not flashing, and the lens cover is removed. Make sure the cables are connected correctly. See the on-screen User’s Guide. You may need to change the image source. See “Switching Between Image Sources.” (Also make sure the source device is turned on.) If the projector and the notebook don’t display the same image Windows Press the function key on your keyboard that lets you display on an external monitor (allow a few seconds for the projector to sync up after you press the key). It may be labeled CRT/ LCD or have a icon, and you may have to hold down the Fn key while pressing it. If that doesn’t work, open the Display utility in the Windows Control Panel (in Windows Vista®, right-click on the desktop and select Personalize, then select Display Settings). Next, click Settings and Advanced or Advanced Settings. Make sure the external monitor port is set as your primary display and/or enabled. See your computer’s documentation or online help for details.
Switching Between Image Sources Press the Search button (remote control), one of the Source buttons (remote control), or the Source Search button (projector). Adjusting Image Position Press the Lens Shift button (remote control) or Lens button (projector) until Adjust Lens Shift is displayed on the screen. To adjust the position, use the button (remote control) or arrow buttons (projector). Press the button repeatedly to make fine adjustments. Press and hold the button to make larger adjustments. If the projector is on a table, you can level the image by turning any of the projector’s adjustable feet. Correcting Image Shape If your image looks like or , press the or button on the projector to correct it. If your image looks likeor, press the or button to correct it. If your image is uneven on all sides, you can use Quick Corner® to adjust the shape. See the on-screen User’s Guide. Changing the Aspect Ratio Press the Aspect button on the remote control to change the aspect ratio. For images input through the Computer port, select Normal to automatically resize the image. Turning the Projector Off Press the power button to turn the projector off. At the confirmation message, press the power button again. Note: If the Direct Power On function is enabled, you can unplug the projector or flip the switch controlling the outlet to which the projector is connected instead. To turn on this feature, see the on-screen User’s Guide. With Epson’s Instant Off® technology, you don’t have to wait for the projector to cool down; just turn it off or unplug it when you’re done. Installing the Manuals 1. Insert the projector CD in your computer’s CD or DVD drive. (Double-click the Epson installer icon, if necessary.) 2. Select your language, select your projector model, and follow the instructions on the screen to register. Then click Projector User’s Guides to install the manual(s). (If you are using Windows® and you don’t have Adobe® Reader®, click Adobe Reader to install it also.) Then click Exit. 3. To view the manuals, double- click the PL Pro Z8000WUNL_ Z8050WNL Guide, Network Operation Guide (for PowerLite Pro Z8050WNL users only), or EasyMP Monitor Operation Guide (for Windows users only) icon on your computer’s desktop. Turning the Projector On 1. Turn on your computer or image source. 2. Make sure you’ve installed the lens (not included), then remove the lens cover. (See the instructions that came with the lens for more information.) 3. Press the power button. After the power light stays green, the projector is ready. Note: If the Direct Power On function is enabled, you can turn the projector on without pressing the power button; just plug it in or flip the switch controlling the outlet to which the projector is connected. To turn on this feature, see the on-screen User’s Guide. 4. If your image does not appear, see “Switching Between Image Sources” or “Troubleshooting.” Mac OS® X From the Apple® menu, select System Preferences, Display or Displays, Detect Displays, VGA Display or Color LCD, and Arrangement or Arrange. Then select Mirror Displays. Where to Get Help Internet support Visit epson.com/support where you can download utilities and documentation, get FAQs and troubleshooting advice, or e-mail Epson. Speak to a support representative To use the Epson PrivateLine® Support service, call (800) 637-7661 and enter the PIN on the included Epson PrivateLine Support card. This service is available 6 AM to 6 PM, Pacific Time, Monday through Friday, for the duration of your warranty period. You may also speak with a projector support specialist by dialing one of the following numbers. U.S.: (562) 276-4394, 6 AM to 6 PM, Pacific Time, Monday-Friday Canada: (905) 709-3839, 6 AM to 6 PM, Pacific Time, Monday-Friday Days and hours of support are subject to change without notice. Toll or long distance charges may apply. Purchase supplies and accessories You can purchase screens and other accessories from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online at www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales). 4118216 Rev.0 4118216 Rev.0 4118216 Rev.0 4118216 Rev.0 1-B C 1-B M 1-B Y 1-B K Focusing the Image Press the Focus button (remote control) or Lens button (projector) until Adjust Focus is displayed on the screen. To adjust the focus, use the button (remote control) or the arrow buttons (projector). Zooming the image Press the Zoom button (remote control) or Lens button (projector) until Adjust Zoom is displayed on the screen. To reduce/enlarge the image, use the button (remote control) or the arrow buttons (projector). Troubleshooting If you see a blank screen or the message No signal Make sure the power light on the projector is green and not flashing, and the lens cover is removed. Make sure the cables are connected correctly. See the on-screen User’s Guide. You may need to change the image source. See “Switching Between Image Sources.” (Also make sure the source device is turned on.) If the projector and the notebook don’t display the same image Windows Press the function key on your keyboard that lets you display on an external monitor (allow a few seconds for the projector to sync up after you press the key). It may be labeled CRT/ LCD or have a icon, and you may have to hold down the Fn key while pressing it. If that doesn’t work, open the Display utility in the Windows Control Panel (in Windows Vista®, right-click on the desktop and select Personalize, then select Display Settings). Next, click Settings and Advanced or Advanced Settings. Make sure the external monitor port is set as your primary display and/or enabled. See your computer’s documentation or online help for details.
PowerLite® Pro Z8000WUNL/Z8050WNL Quick Reference Epson, Instant Off, and Quick Corner are registered trademarks and Epson Exceed Your Vision is a registered logomark of Seiko Epson Corporation. PowerLite and PrivateLine are registered trademarks of Epson America, Inc. General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks. This information is subject to change without notice. © 2009 Epson America, Inc. 10/09 CPD-27504R1 Printed in XXXXXX This Quick Reference card gives brief instructions on connecting your PowerLite projector and using common features. For details, install and view the User’s Guide from the projector’s CD-ROM. Remote Control Map Turn the projectoron and offSwitch image sources 4118216 Rev.0 4118216 Rev.0 4118216 Rev.0 4118216 Rev.0 1-F C 1-F M 1-F Y 1-F K Replacement Parts Product Part Number Replacement lamp one-pack (ELPLP51) V13H010L51 Replacement lamp two-pack (ELPLP52) V13H010L52 Air filter V13H134A23 You can purchase replacement parts from an Epson authorized reseller. See “Where to Get Help” inside this card for more information. Select a source Open projector menus Navigate through menu settings; move pointer Select menu settings Change slides in PowerPoint® (optional wireless mouse receiver required) Temporarily turn off display Automatically adjust computer image Change the aspect ratio Adjust image position Display on-screen help Remote control ID switch Select an image projected over a network (Z8050WNL only) Open menus assigned by user Cancel current operation or return to previous menu Activate screen pointer Enlarge part of an image Freeze the image Select from 7 color modes Use numeric keys to enter passwords, IP settings, etc. Enter passwords Reduce or enlarge image Component-to-VGA cable (optional) S-Video cable (optional) Component-to-VGA cable (optional) Composite video cable (BNC) (optional) HDMI cable (optional)DVI-D cable (optional) VGA cable Note: The illustration above shows the PowerLite Pro Z8000WUNL. If you are using the PowerLite Pro Z8050WNL, the projector and interfaces are slightly different.
PowerLite® Pro Z8000WUNL/Z8050WNL Quick Reference Epson, Instant Off, and Quick Corner are registered trademarks and Epson Exceed Your Vision is a registered logomark of Seiko Epson Corporation. PowerLite and PrivateLine are registered trademarks of Epson America, Inc. General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks. This information is subject to change without notice. © 2009 Epson America, Inc. 10/09 CPD-27504R1 Printed in XXXXXX This Quick Reference card gives brief instructions on connecting your PowerLite projector and using common features. For details, install and view the User’s Guide from the projector’s CD-ROM. Remote Control Map Turn the projectoron and offSwitch image sources 4118216 Rev.0 4118216 Rev.0 4118216 Rev.0 4118216 Rev.0 1-F C 1-F M 1-F Y 1-F K Replacement Parts Product Part Number Replacement lamp one-pack (ELPLP51) V13H010L51 Replacement lamp two-pack (ELPLP52) V13H010L52 Air filter V13H134A23 You can purchase replacement parts from an Epson authorized reseller. See “Where to Get Help” inside this card for more information. Select a source Open projector menus Navigate through menu settings; move pointer Select menu settings Change slides in PowerPoint® (optional wireless mouse receiver required) Temporarily turn off display Automatically adjust computer image Change the aspect ratio Adjust image position Display on-screen help Remote control ID switch Select an image projected over a network (Z8050WNL only) Open menus assigned by user Cancel current operation or return to previous menu Activate screen pointer Enlarge part of an image Freeze the image Select from 7 color modes Use numeric keys to enter passwords, IP settings, etc. Enter passwords Reduce or enlarge image Component-to-VGA cable (optional) S-Video cable (optional) Component-to-VGA cable (optional) Composite video cable (BNC) (optional) HDMI cable (optional)DVI-D cable (optional) VGA cable Note: The illustration above shows the PowerLite Pro Z8000WUNL. If you are using the PowerLite Pro Z8050WNL, the projector and interfaces are slightly different.