Home > Epson > Projector > Epson Powerlite Pro Z8000wunl Quick Reference Manual

Epson Powerlite Pro Z8000wunl Quick Reference Manual

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual Epson Powerlite Pro Z8000wunl Quick Reference Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 6
    Add page 1 to Favourites
    image text
    Enable zoom 
    							PowerLite® Pro Z8000WUNL
Quick Reference
Epson, Instant Off, and Quick Corner are registered trademarks and Epson Exceed Your Vision is a registered logomark of Seiko Epson Corporation. PowerLite and PrivateLine are registered trademarks of Epson America, Inc.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks. 
This information is subject to change without notice.
© 2009 Epson America, Inc. 6/09
CPD-27504
Printed in XXXXXX
This Quick Reference card gives brief instructions on connecting your 
PowerLite projector and using common features. For details, install and 
view the User’s Guide from the projector’s CD-ROM.
Remote Control Map
Turn the projectoron and off
Select a source
Open projector menus
Navigate through menu settings; move pointer
Select menu settings 
Change slides in PowerPoint® (optional wireless mouse receiver required)
Temporarily turn off display
Automatically adjust computer image
Change the aspect ratio
Adjust image position
Display on-screen help
Switch image sources
Remote control ID switch
Open menus assigned by user
Cancel current operation or return to previous menu
Activate screen pointer
Enlarge part of an image
Freeze the image
Select from 7 color modes
Use numeric keys to enter passwords, IP settings, etc.
Enter passwords
Reduce or enlarge image
Component-to-VGA cable
S-Video cableComponent-to-VGA cable
Composite video cable (BNC)
4117552   Rev.0  4117552   Rev.0  4117552   Rev.0  4117552   Rev.0
1-F    C  1-F   M  1-F   Y  1-F   K
Replacement Parts
Product Part Number
Replacement lamp one-pack (ELPLP51)  V13H010L51
Replacement lamp two-pack (ELPLP52)  V13H010L52
Air filter  V13H134A23
You can purchase replacement parts from an Epson 
authorized reseller. See “Where to Get Help” inside this card 
for more information.
HDMI cableDVI-D cableVGA cable
    Add page 2 to Favourites
    image text
    Enable zoom 
    							Switching Between Image 
Sources
Press the Search button (remote 
control), one of the Source buttons 
(remote control), or the Source 
Search button (projector).
   
Adjusting Image Position
Press the Lens Shift button (remote 
control) or Lens button (projector) 
until Adjust Lens Shift is displayed 
on the screen.
To adjust the position, use the  
button (remote control) or arrow 
buttons (projector).
Press the button repeatedly to make 
fine adjustments. Press and hold the 
button to make larger adjustments.
If the projector is on a table, you can 
level the image by turning any of the 
projector’s adjustable feet.
Correcting Image Shape
  If your image looks like  or ,
press the or button on the 
projector to correct it. 
  If your image looks likeor, 
press the  or button to 
correct it. 
  If your image is uneven on all sides, 
you can use Quick Corner® to 
adjust the shape. See the 
User’s Guide.
Changing the Aspect Ratio
Press the Aspect button on the remote 
control to change the aspect ratio.
For images input through the 
Computer port, select Normal to 
automatically resize the image.
Turning the Projector Off
Press the  power button to turn 
the projector off. At the confirmation 
message, press the  power button 
again.
Note: If the Direct Power On function is enabled, you can unplug the projector or flip the switch controlling the outlet to which the projector is connected instead.
With Epson’s Instant Off® technology, 
you don’t have to wait for the projector 
to cool down; just turn it off or unplug 
it when you’re done.
Focusing the Image
Press the Focus button (remote control) 
or Lens button (projector) until Adjust 
Focus is displayed on the screen.
To adjust the focus, use the  button 
(remote control) or the arrow buttons 
(projector).
Zooming the image
Press the Zoom button (remote control) 
or Lens button (projector) until Adjust 
Zoom is displayed on the screen.
To reduce/enlarge the image, use the 
 button (remote control) or the arrow 
buttons (projector).
Installing the Manuals
1.  Insert the projector CD in your 
computer’s CD or DVD drive. 
(Double-click the Epson installer 
icon, if necessary.)
2.  Select your language, follow the 
instructions on the screen to 
register, then click User’s Guide, 
EasyMP Monitor Operation 
Guide (Windows®) or User’s Guide 
(Macintosh®) to install the manuals. 
(If you are using Windows and you 
don’t have Adobe® Reader®, click 
Adobe Reader to install it also.) 
Then click Exit.
3.  To view the manuals, double-click 
the PowerLite Pro Z8000WUNL 
Guide or Easy MP Monitor 
Operation Guide (for Windows 
users only) icon on your computer’s 
desktop.
Turning the Projector On
1.  Turn on your computer or image 
source.
2.  Remove the lens cover. 
3. Press the  power button. After 
the power light stays green, the 
projector is ready.
 Note: If the Direct Power On function is enabled, you can turn the projector on without pressing the  power button; just plug it in or flip the switch controlling the outlet to which the projector is connected. To turn on this feature, see the User’s Guide.
4.  If your image does not appear, see 
“Switching Between Image Sources” 
or “Troubleshooting.”
Troubleshooting
If you see a blank screen or the 
message No signal
  Make sure the  power light on 
the projector is green and not 
flashing, and the lens cover is 
removed.
  Make sure the cables are 
connected correctly. See the 
on-screen User’s Guide.
  You may need to change the 
image source. See “Switching 
Between Image Sources.” (Also 
make sure the source device is 
turned on.)
If the projector and the notebook 
don’t display the same image
Windows
Hold down the Fn key and press 
the function key (such asor 
CRT/LCD) that lets you display on 
an external monitor (allow a few 
seconds for the projector to sync up 
after you press the key). If that does 
not work, open the Windows Control 
Panel, click Display, Settings, and 
Advanced. Make sure the external 
monitor port is set as your primary 
display. See your computer’s 
documentation or online help for 
details.
Macintosh
From the Apple® menu, select System 
Preferences, Displays, Detect  
Displays, VGA Display or Color LCD, 
and Arrangement or Arrange. Then 
select Mirror Displays.
Where to Get Help
Internet support
Visit Epson’s support website at 
epson.com/support and select your 
product for solutions to common 
problems. You can download utilities 
and documentation, get FAQs and 
troubleshooting advice, or e-mail 
Epson with your questions.
Speak to a support representative
To use the Epson PrivateLine® Support 
service, call (800) 637-7661 and 
enter the PIN on the included Epson 
PrivateLine Support card. This service 
is available 6 AM to 6 PM, Pacific 
Time, Monday through Friday, for 
the duration of your warranty period. 
You may also speak with a projector 
support specialist by dialing one of 
the following numbers. (Toll or long 
distance charges may apply.)
 U.S.: (562) 276-4394, 6 AM to 6 PM, 
Pacific Time, Monday-Friday
Canada: (905) 709-3839, 6 AM to 
6 PM, Pacific Time, Monday-Friday
Days and hours of support are subject 
to change without notice. 
Purchase supplies and accessories 
You can purchase screens and other 
accessories from an Epson authorized 
reseller. To find the nearest reseller, 
call 800-GO-EPSON (800-463-7766). 
Or you can purchase online at 
www.epsonstore.com (U.S. sales) or 
www.epson.ca (Canadian sales).
4117552   Rev.0  4117552   Rev.0  4117552   Rev.0  4117552   Rev.0
1-B    C  1-B   M  1-B   Y  1-B   K
    Add page 3 to Favourites
    image text
    Enable zoom 
    							Switching Between Image 
Sources
Press the Search button (remote 
control), one of the Source buttons 
(remote control), or the Source 
Search button (projector).
   
Adjusting Image Position
Press the Lens Shift button (remote 
control) or Lens button (projector) 
until Adjust Lens Shift is displayed 
on the screen.
To adjust the position, use the  
button (remote control) or arrow 
buttons (projector).
Press the button repeatedly to make 
fine adjustments. Press and hold the 
button to make larger adjustments.
If the projector is on a table, you can 
level the image by turning any of the 
projector’s adjustable feet.
Correcting Image Shape
  If your image looks like  or ,
press the or button on the 
projector to correct it. 
  If your image looks likeor, 
press the  or button to 
correct it. 
  If your image is uneven on all sides, 
you can use Quick Corner® to 
adjust the shape. See the 
User’s Guide.
Changing the Aspect Ratio
Press the Aspect button on the remote 
control to change the aspect ratio.
For images input through the 
Computer port, select Normal to 
automatically resize the image.
Turning the Projector Off
Press the  power button to turn 
the projector off. At the confirmation 
message, press the  power button 
again.
Note: If the Direct Power On function is enabled, you can unplug the projector or flip the switch controlling the outlet to which the projector is connected instead.
With Epson’s Instant Off® technology, 
you don’t have to wait for the projector 
to cool down; just turn it off or unplug 
it when you’re done.
Focusing the Image
Press the Focus button (remote control) 
or Lens button (projector) until Adjust 
Focus is displayed on the screen.
To adjust the focus, use the  button 
(remote control) or the arrow buttons 
(projector).
Zooming the image
Press the Zoom button (remote control) 
or Lens button (projector) until Adjust 
Zoom is displayed on the screen.
To reduce/enlarge the image, use the 
 button (remote control) or the arrow 
buttons (projector).
Installing the Manuals
1.  Insert the projector CD in your 
computer’s CD or DVD drive. 
(Double-click the Epson installer 
icon, if necessary.)
2.  Select your language, follow the 
instructions on the screen to 
register, then click User’s Guide, 
EasyMP Monitor Operation 
Guide (Windows®) or User’s Guide 
(Macintosh®) to install the manuals. 
(If you are using Windows and you 
don’t have Adobe® Reader®, click 
Adobe Reader to install it also.) 
Then click Exit.
3.  To view the manuals, double-click 
the PowerLite Pro Z8000WUNL 
Guide or Easy MP Monitor 
Operation Guide (for Windows 
users only) icon on your computer’s 
desktop.
Turning the Projector On
1.  Turn on your computer or image 
source.
2.  Remove the lens cover. 
3. Press the  power button. After 
the power light stays green, the 
projector is ready.
 Note: If the Direct Power On function is enabled, you can turn the projector on without pressing the  power button; just plug it in or flip the switch controlling the outlet to which the projector is connected. To turn on this feature, see the User’s Guide.
4.  If your image does not appear, see 
“Switching Between Image Sources” 
or “Troubleshooting.”
Troubleshooting
If you see a blank screen or the 
message No signal
  Make sure the  power light on 
the projector is green and not 
flashing, and the lens cover is 
removed.
  Make sure the cables are 
connected correctly. See the 
on-screen User’s Guide.
  You may need to change the 
image source. See “Switching 
Between Image Sources.” (Also 
make sure the source device is 
turned on.)
If the projector and the notebook 
don’t display the same image
Windows
Hold down the Fn key and press 
the function key (such asor 
CRT/LCD) that lets you display on 
an external monitor (allow a few 
seconds for the projector to sync up 
after you press the key). If that does 
not work, open the Windows Control 
Panel, click Display, Settings, and 
Advanced. Make sure the external 
monitor port is set as your primary 
display. See your computer’s 
documentation or online help for 
details.
Macintosh
From the Apple® menu, select System 
Preferences, Displays, Detect  
Displays, VGA Display or Color LCD, 
and Arrangement or Arrange. Then 
select Mirror Displays.
Where to Get Help
Internet support
Visit Epson’s support website at 
epson.com/support and select your 
product for solutions to common 
problems. You can download utilities 
and documentation, get FAQs and 
troubleshooting advice, or e-mail 
Epson with your questions.
Speak to a support representative
To use the Epson PrivateLine® Support 
service, call (800) 637-7661 and 
enter the PIN on the included Epson 
PrivateLine Support card. This service 
is available 6 AM to 6 PM, Pacific 
Time, Monday through Friday, for 
the duration of your warranty period. 
You may also speak with a projector 
support specialist by dialing one of 
the following numbers. (Toll or long 
distance charges may apply.)
 U.S.: (562) 276-4394, 6 AM to 6 PM, 
Pacific Time, Monday-Friday
Canada: (905) 709-3839, 6 AM to 
6 PM, Pacific Time, Monday-Friday
Days and hours of support are subject 
to change without notice. 
Purchase supplies and accessories 
You can purchase screens and other 
accessories from an Epson authorized 
reseller. To find the nearest reseller, 
call 800-GO-EPSON (800-463-7766). 
Or you can purchase online at 
www.epsonstore.com (U.S. sales) or 
www.epson.ca (Canadian sales).
4117552   Rev.0  4117552   Rev.0  4117552   Rev.0  4117552   Rev.0
1-B    C  1-B   M  1-B   Y  1-B   K
    Add page 4 to Favourites
    image text
    Enable zoom 
    							Switching Between Image 
Sources
Press the Search button (remote 
control), one of the Source buttons 
(remote control), or the Source 
Search button (projector).
   
Adjusting Image Position
Press the Lens Shift button (remote 
control) or Lens button (projector) 
until Adjust Lens Shift is displayed 
on the screen.
To adjust the position, use the  
button (remote control) or arrow 
buttons (projector).
Press the button repeatedly to make 
fine adjustments. Press and hold the 
button to make larger adjustments.
If the projector is on a table, you can 
level the image by turning any of the 
projector’s adjustable feet.
Correcting Image Shape
  If your image looks like  or ,
press the or button on the 
projector to correct it. 
  If your image looks likeor, 
press the  or button to 
correct it. 
  If your image is uneven on all sides, 
you can use Quick Corner® to 
adjust the shape. See the 
User’s Guide.
Changing the Aspect Ratio
Press the Aspect button on the remote 
control to change the aspect ratio.
For images input through the 
Computer port, select Normal to 
automatically resize the image.
Turning the Projector Off
Press the  power button to turn 
the projector off. At the confirmation 
message, press the  power button 
again.
Note: If the Direct Power On function is enabled, you can unplug the projector or flip the switch controlling the outlet to which the projector is connected instead.
With Epson’s Instant Off® technology, 
you don’t have to wait for the projector 
to cool down; just turn it off or unplug 
it when you’re done.
Focusing the Image
Press the Focus button (remote control) 
or Lens button (projector) until Adjust 
Focus is displayed on the screen.
To adjust the focus, use the  button 
(remote control) or the arrow buttons 
(projector).
Zooming the image
Press the Zoom button (remote control) 
or Lens button (projector) until Adjust 
Zoom is displayed on the screen.
To reduce/enlarge the image, use the 
 button (remote control) or the arrow 
buttons (projector).
Installing the Manuals
1.  Insert the projector CD in your 
computer’s CD or DVD drive. 
(Double-click the Epson installer 
icon, if necessary.)
2.  Select your language, follow the 
instructions on the screen to 
register, then click User’s Guide, 
EasyMP Monitor Operation 
Guide (Windows®) or User’s Guide 
(Macintosh®) to install the manuals. 
(If you are using Windows and you 
don’t have Adobe® Reader®, click 
Adobe Reader to install it also.) 
Then click Exit.
3.  To view the manuals, double-click 
the PowerLite Pro Z8000WUNL 
Guide or Easy MP Monitor 
Operation Guide (for Windows 
users only) icon on your computer’s 
desktop.
Turning the Projector On
1.  Turn on your computer or image 
source.
2.  Remove the lens cover. 
3. Press the  power button. After 
the power light stays green, the 
projector is ready.
 Note: If the Direct Power On function is enabled, you can turn the projector on without pressing the  power button; just plug it in or flip the switch controlling the outlet to which the projector is connected. To turn on this feature, see the User’s Guide.
4.  If your image does not appear, see 
“Switching Between Image Sources” 
or “Troubleshooting.”
Troubleshooting
If you see a blank screen or the 
message No signal
  Make sure the  power light on 
the projector is green and not 
flashing, and the lens cover is 
removed.
  Make sure the cables are 
connected correctly. See the 
on-screen User’s Guide.
  You may need to change the 
image source. See “Switching 
Between Image Sources.” (Also 
make sure the source device is 
turned on.)
If the projector and the notebook 
don’t display the same image
Windows
Hold down the Fn key and press 
the function key (such asor 
CRT/LCD) that lets you display on 
an external monitor (allow a few 
seconds for the projector to sync up 
after you press the key). If that does 
not work, open the Windows Control 
Panel, click Display, Settings, and 
Advanced. Make sure the external 
monitor port is set as your primary 
display. See your computer’s 
documentation or online help for 
details.
Macintosh
From the Apple® menu, select System 
Preferences, Displays, Detect  
Displays, VGA Display or Color LCD, 
and Arrangement or Arrange. Then 
select Mirror Displays.
Where to Get Help
Internet support
Visit Epson’s support website at 
epson.com/support and select your 
product for solutions to common 
problems. You can download utilities 
and documentation, get FAQs and 
troubleshooting advice, or e-mail 
Epson with your questions.
Speak to a support representative
To use the Epson PrivateLine® Support 
service, call (800) 637-7661 and 
enter the PIN on the included Epson 
PrivateLine Support card. This service 
is available 6 AM to 6 PM, Pacific 
Time, Monday through Friday, for 
the duration of your warranty period. 
You may also speak with a projector 
support specialist by dialing one of 
the following numbers. (Toll or long 
distance charges may apply.)
 U.S.: (562) 276-4394, 6 AM to 6 PM, 
Pacific Time, Monday-Friday
Canada: (905) 709-3839, 6 AM to 
6 PM, Pacific Time, Monday-Friday
Days and hours of support are subject 
to change without notice. 
Purchase supplies and accessories 
You can purchase screens and other 
accessories from an Epson authorized 
reseller. To find the nearest reseller, 
call 800-GO-EPSON (800-463-7766). 
Or you can purchase online at 
www.epsonstore.com (U.S. sales) or 
www.epson.ca (Canadian sales).
4117552   Rev.0  4117552   Rev.0  4117552   Rev.0  4117552   Rev.0
1-B    C  1-B   M  1-B   Y  1-B   K
    Add page 5 to Favourites
    image text
    Enable zoom 
    							PowerLite® Pro Z8000WUNL
Quick Reference
Epson, Instant Off, and Quick Corner are registered trademarks and Epson Exceed Your Vision is a registered logomark of Seiko Epson Corporation. PowerLite and PrivateLine are registered trademarks of Epson America, Inc.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks. 
This information is subject to change without notice.
© 2009 Epson America, Inc. 6/09
CPD-27504
Printed in XXXXXX
This Quick Reference card gives brief instructions on connecting your 
PowerLite projector and using common features. For details, install and 
view the User’s Guide from the projector’s CD-ROM.
Remote Control Map
Turn the projectoron and off
Select a source
Open projector menus
Navigate through menu settings; move pointer
Select menu settings 
Change slides in PowerPoint® (optional wireless mouse receiver required)
Temporarily turn off display
Automatically adjust computer image
Change the aspect ratio
Adjust image position
Display on-screen help
Switch image sources
Remote control ID switch
Open menus assigned by user
Cancel current operation or return to previous menu
Activate screen pointer
Enlarge part of an image
Freeze the image
Select from 7 color modes
Use numeric keys to enter passwords, IP settings, etc.
Enter passwords
Reduce or enlarge image
Component-to-VGA cable
S-Video cableComponent-to-VGA cable
Composite video cable (BNC)
4117552   Rev.0  4117552   Rev.0  4117552   Rev.0  4117552   Rev.0
1-F    C  1-F   M  1-F   Y  1-F   K
Replacement Parts
Product Part Number
Replacement lamp one-pack (ELPLP51)  V13H010L51
Replacement lamp two-pack (ELPLP52)  V13H010L52
Air filter  V13H134A23
You can purchase replacement parts from an Epson 
authorized reseller. See “Where to Get Help” inside this card 
for more information.
HDMI cableDVI-D cableVGA cable
    Add page 6 to Favourites
    image text
    Enable zoom 
    							PowerLite® Pro Z8000WUNL
Quick Reference
Epson, Instant Off, and Quick Corner are registered trademarks and Epson Exceed Your Vision is a registered logomark of Seiko Epson Corporation. PowerLite and PrivateLine are registered trademarks of Epson America, Inc.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks. 
This information is subject to change without notice.
© 2009 Epson America, Inc. 6/09
CPD-27504
Printed in XXXXXX
This Quick Reference card gives brief instructions on connecting your 
PowerLite projector and using common features. For details, install and 
view the User’s Guide from the projector’s CD-ROM.
Remote Control Map
Turn the projectoron and off
Select a source
Open projector menus
Navigate through menu settings; move pointer
Select menu settings 
Change slides in PowerPoint® (optional wireless mouse receiver required)
Temporarily turn off display
Automatically adjust computer image
Change the aspect ratio
Adjust image position
Display on-screen help
Switch image sources
Remote control ID switch
Open menus assigned by user
Cancel current operation or return to previous menu
Activate screen pointer
Enlarge part of an image
Freeze the image
Select from 7 color modes
Use numeric keys to enter passwords, IP settings, etc.
Enter passwords
Reduce or enlarge image
Component-to-VGA cable
S-Video cableComponent-to-VGA cable
Composite video cable (BNC)
4117552   Rev.0  4117552   Rev.0  4117552   Rev.0  4117552   Rev.0
1-F    C  1-F   M  1-F   Y  1-F   K
Replacement Parts
Product Part Number
Replacement lamp one-pack (ELPLP51)  V13H010L51
Replacement lamp two-pack (ELPLP52)  V13H010L52
Air filter  V13H134A23
You can purchase replacement parts from an Epson 
authorized reseller. See “Where to Get Help” inside this card 
for more information.
HDMI cableDVI-D cableVGA cable
    All Epson manuals Comments (0)

    Related Manuals for Epson Powerlite Pro Z8000wunl Quick Reference Manual