Epson Powerlite Pro G5750wunl Users Guide

							Technical Specifications171
Keystone correction PowerLite Pro G5450WUNL/G5750WUNL:
±30° vertical, ±20° horizontal (standard lens)
PowerLite Pro G5550NL/G5650WNL/G5950NL:
±40° vertical, ±20° horizontal (standard lens)
Mouse compatibility Requires optional Wireless IR Mouse Receiver (part number 
V12H007T16)
Projection Lamp
note
Lamp life will vary depending upon mode selected, environmental conditions, and usage. Brightness decreases over 
time. 
Turn off this product when not in use to prolong the life of the projector. 
Type UHE (Ultra High Efficiency)
Power consumption PowerLite Pro G5450WUNL/G5550NL: 275 W
PowerLite Pro G5650WNL/G5750WUNL/G5950NL: 330 W
Lamp life Approx. 2000 hours (Normal Power Consumption mode)
Approx. 3000 hours (ECO Power Consumption mode)
Part number PowerLite Pro G5450WUNL/G5550NL: 
V13H010L62
PowerLite Pro G5650WNL/G5750WUNL/G5950NL:
V13H010L63
Remote Control
Range 49.2 feet (15 meters)
Batteries (2) Alkaline AA
Dimensions
Height 5.3 inches (135 mm), feet retracted 
Width 18.5 inches (470 mm)
Depth 12.3 inches (311.5 mm), not including lens
Weight (without lens) 13.7 lb (6.2 kg) 
						

							172Technical Specifications
Electrical
Rated frequency 50/60 Hz AC
Power supply Powerlite Pro G5450WUNL: 100/240 VAC, 4.2 A/1.8 A
Powerlite Pro G5550NL: 100/240 VAC, 3.9 A/1.7 A
PowerLite Pro G5650WNL/G5950NL: 100/240 VAC, 4.7 A/2.0 A
Powerlite Pro G5750WUNL: 100/240 VAC, 4.8 A/2.1 A
Power consumption PowerLite Pro G5450WUNL:
Operating: 
100 to 120 VAC
413 W (Normal Power Consumption mode)
345 W (ECO Power Consumption mode)
220 to 240 VAC
393W (Normal Power Consumption mode)
330 W (ECO Power Consumption mode)
Standby: 
100 to 120 VAC
0.38 W (Communication off)
10 W (Communication on)
220 to 240 VAC
0.47 W (Communication off)
11 W (Communication on)
PowerLite Pro G5550NL:
Operating: 
100 to 120 VAC
390 W (Normal Power Consumption mode)
323 W (ECO Power Consumption mode)
220 to 240 VAC
373 W (Normal Power Consumption mode)
311 W (ECO Power Consumption mode)
Standby: 
100 to 120 VAC
0.38 W (Communication off)
10 W (Communication on)
220 to 240 VAC
0.47 W (Communication off)
11 W (Communication on) 
						

							Technical Specifications173
PowerLite Pro G5650WNL/G5950NL:
Operating: 
100 to 120 VAC
464 W (Normal Power Consumption mode)
383 W (ECO Power Consumption mode)
220 to 240 VAC
442 W (Normal Power Consumption mode)
367 W (ECO Power Consumption mode)
Standby: 
100 to 120 VAC
0.38 W (Communication off)
10 W (Communication on)
220 to 240 VAC
0.47 W (Communication off)
11 W (Communication on)
PowerLite Pro G5750WUNL:
Operating: 
100 to 120 VAC
477 W (Normal Power Consumption mode)
394 W (ECO Power Consumption mode)
220 to 240 VAC
451W (Normal Power Consumption mode)
376 W (ECO Power Consumption mode)
Standby: 
100 to 120 VAC
0.38 W (Communication off)
10 W (Communication on)
220 to 240 VAC
0.47 W (Communication off)
11 W (Communication on)
Environmental
Temperature Operating: 32 to 104 °F (0 to 40 °C)
32 to 95 °F (0 to 35 °C) (over 4,900 ft/1,500 m, with High Altitude 
Mode and Normal Power Consumption mode active)
Storage: 14 to 140 °F (–10 to 60 °C)
Humidity
(non-condensing) Operating: 20 to 80% RH 
						

							174Technical Specifications Operating altitude 0 to 9,800 ft (0 to 3,000 m) (over 4,900 ft/1,500 m, with High 
Altitude Mode active)
Safety and Approvals
United States FCC 47CFR Part 15B Class B (DoC)
UL60950-1 Second Edition (cTUVus Mark)
Canada ICES-003 Class B
CSA C22.2 No. 60950-1-07 (cTUVus Mark)
 Pixelworks
™ DNX™ ICs are used in this projector.
Compatible Video Formats
These projectors support the high definition video and computer display formats listed in this 
section, as well as traditional NTSC, PAL, and SECAM video standards.
To project images output from a computer, the computer’s video card must be set at a refresh rate 
(vertical frequency) that’s compatible with the projector. Some images are automatically resized 
using Epson’s SizeWize
™ technology to display in the projector’s native format. The frequencies of 
some computers may not allow images to display correctly; see your computer’s documentation for 
details.
Computer signals (analog RGB)
Mode Refresh Rate (Hz) Resolution
VGA—60
VESA—72
VESA—75
VESA—8560
72
75
85640 
× 480
640 
× 480
640 
× 480
640 
× 480
SVGA—56
SVGA—60
SVGA—72
SVGA—75
SVGA—8556
60
72
75
85800 
× 600
800 
× 600
800 
× 600
800 
× 600
800 
× 600
XGA—60
XGA—70
XGA—75
XGA—8560
70
75
851024 
× 768
1024 
× 768
1024 
× 768
1024 
× 768 
						

							Technical Specifications175
* Available only when Wide is selected as the Resolution with the PowerLite Pro 
G5450WUNL/G5650WNL/G5750WUNL.
** Available only when a VESA CVT-RB (Reduced Blanking) signal is input with the PowerLite 
G5450WUNL/G5750WUNL.SXGA1—70
SXGA1—75
SXGA1—8570
75
851152 
× 864
1152 
× 864
1152 
× 864
WXGA—60
WXGA—75
WXGA—8560
75
851280 
× 800
1280 
× 800
1280 
× 800
SXGA2—60
SXGA2—75
SXGA2—8560
75
851280 
× 960
1280 
× 960
1280 
× 960
SXGA3—60
SXGA3—75
SXGA3—8560
75
851280 
× 1024
1280 
× 1024
1280 
× 1024
WXGA1—60
WXGA2—6060
601280 
× 768
1360 
× 768
WXGA+60
WXGA+75
WXGA+8560
75
851440 
× 900
1440 
× 900
1440 
× 900
SXGA+60
SXGA+7560
751400 
× 1050
1400 
× 1050
UXGA—60 60 1600 
× 1200
WSXGA+60* 60 1680 
× 1050
WUXGA—60** 60 1920 
× 1200
MAC13
MAC16
MAC19
MAC19-60
MAC2167
75
75
59
75640 
× 480
832 
× 624
1024 
× 768
1024 
× 768
1152 
× 870
Computer signals (analog RGB) (continued)
Mode Refresh Rate (Hz) Resolution 
						

							176Technical Specifications Component video
Mode Refresh Rate (Hz) Resolution
TV525i (480i)
TV625i (576i)
SDTV525p (480p)
SDTV625p (576p)
HDTV750p (720p)
HDTV750p (720p)
HDTV1125i (1080i)
HDTV1125i (1080i)60
50
60
50
60
50
60
50720 
× 480
720 
× 576
720 
× 480
720 
× 576
1280 
× 720
1280 
× 720
1920 
× 1080
1920 
× 1080
Composite video/S-Video
Mode Refresh Rate (Hz) Resolution
NTSC
NTSC 4:43
PAL
N-PAL
M-PAL
PAL—60
SECAM60
60
50
50
60
60
50720 
× 480
720 
× 480
720 
× 576
720 
× 576
720 
× 576
720 
× 576
720 
× 576
Signals input through the DVI-D (G5450WUNL/G5750WUNL only) or HDMI ports
Mode Refresh Rate (Hz) Resolution
VGA—60 60 640 
× 480
SVGA—60 60 800 
× 600
XGA—60 60 1024 
× 768
WXGA—60 60 1280 
× 800
SXGA2—60 60 1280 
× 960
SXGA3—60 60 1280 
× 1024
SXGA+60 60 1400 
× 1050
UXGA—60 60 1600 
× 1200
WUXGA—60* 60 1920 
× 1200 
						

							Technical Specifications177
* Available only when a VESA CVT-RB (Reduced Blanking) signal is input with the PowerLite 
G5450WUNL/G5750WUNL.TV525i (480i)
TV625i (576i)
SDTV525p (480p)
SDTV625p (576p)
HDTV750p (720p)
HDTV750p (720p)
HDTV1125i (1080i)
HDTV1125i (1080i)
HDTV1125p (1080p)
HDTV1125p (1080p)
HDTV1125p (1080p)
HDTV1125p (1080p)60
50
60
50
60
50
60
50
60
50
30
24720 
× 480
720 
× 576
720 
× 480
720 
× 576
1280 
× 720
1280 
× 720
1920 
× 1080
1920 
× 1080
1920 
× 1080
1920 
× 1080
1920 
× 1080
1920 
× 1080
Signals input through the DVI-D (G5450WUNL/G5750WUNL only) or HDMI ports (continued)
Mode Refresh Rate (Hz) Resolution 
						

							178Technical Specifications 
						

							C
179
C
Notices
This appendix includes safety instructions and other important information 
about your projector.
Important Safety Instructions
Follow these safety instructions when setting up and using the projector:
■Do not look into the lens when the projector is on. The bright light can 
damage your eyes, and is especially dangerous for children and pets.
■Do not place the projector on an unstable cart, stand, or table.
■Do not operate the projector on its side, or while tilted to one side. 
Do not tilt the projector forward or back at a greater angle than that 
specified for vertical keystone correction (see page 171). 
■If the projector is mounted on a ceiling, it should be installed by 
qualified technicians using mounting hardware designed for use with 
this projector. If the projector is not installed correctly, the projector 
may fall from its ceiling mount. This could cause serious injury to 
anyone under the mount and could damage the projector.
■If you use a ceiling mount and apply adhesives to the mount to prevent 
the screws from loosening, or if you use lubricants or oils on the 
projector, the projector case may crack and the projector may fall from 
its ceiling mount. This could cause serious injury to anyone under the 
mount and could damage the projector. When installing or adjusting a 
ceiling mount, do not use adhesives to prevent the screws from loosening 
and do not use oils or lubricants.
■Do not stand on the projector or place heavy objects on it.
■Do not use the projector where it may be exposed to rain, water, or 
excessive humidity. 
■Unplug the projector from the wall outlet before cleaning. Use a dry 
cloth (or, for stubborn dirt or stains, a moist cloth that has been wrung 
dry) for cleaning. Do not use liquid or aerosol cleaners, or solvents such 
as alcohol, thinner, or benzine. 
						

							180Notices
■Do not use sprays containing flammable gas to clean the lens or filter. 
Do not spray a liquid of any kind directly on the projector or its lens. Do 
not use the projector where there may be flammable, explosive, or 
corrosive gases present in the atmosphere.
■Do not place containers of liquid on top of the projector. Never spill 
liquid of any kind into the projector.
■Do not use the projector where it may be exposed to smoke, steam, or 
excessive dust.
■Never insert or drop objects of any kind through the projector’s vents or 
openings. Do not leave metal, flammable, or foreign objects nearby.
■Do not use or store the projector or remote control in a hot location, 
such as near a heater, in direct sunlight, or in a closed vehicle.
■Do not block the slots and openings in the projector case. They provide 
ventilation and prevent the projector from overheating. Do not operate 
the projector on a sofa, rug, or other soft surface. If you are setting up 
the projector near a wall, leave at least 7.9 inches (20 cm) of space 
between the wall and the air exhaust vent.
■Do not operate the projector in a closed-in cabinet unless proper 
ventilation is provided.
■If you are using two or more projectors side-by-side, leave at least 2 feet 
(60 cm) of space between the projectors to allow for proper ventilation.
■You may need to clean the air filter and vent. A clogged air filter or vent 
can block ventilation needed to cool the projector.
■Do not store the projector outdoors for an extended length of time.
■Do not use the projector outside the required temperature range (see 
page 173). Doing so may cause an unstable display and could lead to 
projector damage.
■Do not store the projector outside the required temperature range (see 
page 173) or in direct sunlight for long periods of time. Doing so may 
cause damage to the case.
■Do not touch the plug during an electrical storm. Otherwise, you may 
receive an electric shock.
■Unplug the projector when it will not be used for extended periods. 
Place the projector near an outlet where the plug can be easily 
unplugged.
■Remove the batteries from the remote control if you will not be using 
the projector for a long period of time.
■Unplug the projector from the wall outlet and refer servicing to qualified 
service personnel under the following conditions: if it does not operate 
normally when you follow the operating instructions, or exhibits a