Epson Powerlite Pro G5150nl Multimedia Projector Users Guide

Fine-Tuning the Projector111
Extended Display
Closed Caption
User’s Logo
Projection
Operation
Standby Mode
Projector ID
Multi-screen
Language
Reset
Network Basic
Wireless LAN (G5150NL and G5350NL only)
Security
Wired LAN
PJLink Password
Web Control Password
SNMP
Mail
AMX Device Discovery
Projector Name
Others
Reset
Info Lamp Hours
Source
Input Signal
Resolution
Video Signal
Refresh Rate
Sync Info
Status
Reset Reset All
Reset Lamp Hours Menu Options 

112Fine-Tuning the Projector 

6
113
6
Managing Projectors
The software included with your projector lets you monitor and 
control your projectors from a remote computer.
First connect and configure each projector you want to monitor. You 
can connect the projector wirelessly in Access Point mode (G5150NL 
and G5350NL only, as described on page 69) or over a wired network 
as described in this chapter.
Once you’ve connected the projectors to the network, you can use any 
of these tools to manage your projectors:
■Use EMP Monitor...

114Managing Projectors
Connecting to a Wired Network
Follow these steps to connect the projector to your network and 
configure it with an IP address: 
PowerLite Pro G5150NL and G5350NL
1. Connect the projector to your network using a commercially 
available 100BaseTX or 10BaseT network cable. Connect the 
cable to the 
LAN port on the projector. See page 37.
2. Turn on the projector.
3. Press the 
Menu button on the remote control, select the 
Network menu, then press Enter. 
4. Choose 
Network...

Managing Projectors115
6. Do one of the following:
■If your network assigns addresses automatically, turn on the 
DHCP setting.
■If your network does not assign addresses automatically, turn 
off 
DHCP and enter the projector’s IP Address, Subnet 
Mask
, and Gateway Address. 
To enter numbers, use the  pointer button on the remote 
control to highlight the number you want to input, then press 
the 
Enter button. 
7. When you’re done making all necessary changes, select 
Return, 
select 
Setup complete,...

116Managing Projectors5. Do one of the following:
■If your network assigns addresses automatically, turn on the 
DHCP setting.
■If your network does not assign addresses automatically, turn 
off 
DHCP and enter the projector’s IP Address, Subnet 
Mask
, and Gateway Address. 
To enter numbers, use the  pointer button on the remote 
control to highlight the number you want to input, then press 
Enter. 
6. When you’re done making all necessary changes, select 
Return, 
Setup complete, and then Yes to...

Managing Projectors117
3. Choose Mail, then press Enter. You see a screen like this:
4. Highlight 
On to receive e-mail notifications, then press Enter.
5. Enter the IP address for the 
SMTP server for the projector.
You can enter a number from 0 to 255 in each field of the address. 
However, the following IP addresses cannot be used: 127.x.x.x, 
224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 
255).
6. Enter the SMTP server’s port number. The default value is 25. 
You can enter a numeric...

118Managing ProjectorsWhen the selected problem or warning occurs, an e-mail message is 
sent to the specified notification addresses. The subject line of the 
e-mail is 
EPSON Projector. The e-mail includes the following 
information:
■Line 1: The name of the projector where the problem has 
occurred
■Line 2: The IP address of the projector where the problem has 
occurred
■Line 3: Details of the problem
PowerLite Pro G5200WNL
1. Press the Menu button on the remote control, select the 
Network menu, then...

Managing Projectors119
6. Choose one of the Email Address fields, then enter the e-mail 
address where you want to receive a message when a problem 
occurs. You can register up to three addresses. You can enter up to 
32 alphanumeric characters for the e-mail address.
7. Select problems or warnings to be notified about by e-mail. 
(Numbers 1 through 3 in this section correspond to the e-mail 
addresses you entered.) 
8. When you’re done making all necessary changes, select 
Return, 
select 
Setup...

120Managing Projectors