Epson Powerlite Pro Cinema 800 Users Guide

Setting Up the Projector21
Turning On the Projector
1. If this is your first time using the projector, remove the 
protective lens pad.
2. Remove the lens cap.
3. Turn on any connected equipment you plan to use.
4. Turn on the power switch on the back of the projector.
5. Press the 
On button on the remote control, or press the Power button on the projector.
Power switch
Turn on the projector 

22Setting Up the ProjectorNote: To keep children from turning on the projector, you can use the Child Lock (see page 31).
If you’ll be using the projector at an altitude above 4900 feet (1500 meters), turn on High Altitude 
Mode so the fan can properly cool the projector at the high altitude air pressure. See page 46 for 
details.
The projector takes about 10 seconds to warm up and display an image. If you don’t see a 
picture, you may need to change the image source as described on the next page....

Setting Up the Projector23
If you press the Source button on the projector, 
you see a menu of available sources. 
Press the u or d button to highlight a source and press the 
 Select button.
If you select the Input A source using either the remote control or the menu above, you may 
see the Input A menu:
Press the u or d button to highlight 
YCbCr (for component video with an NTSC signal) or 
YPbPr (for component video with an HDTV signal), or select Auto so the projector can 
automatically detect the...

24Setting Up the Projector
Positioning the Image
If the image is not centered on the screen, use the horizontal and vertical lens shift dials to 
adjust its position.
Caution: Do not try to move the lens by hand, or you may damage the projector. Always use the 
lens shift dials to change the lens position.
Note: You can display a test pattern to help adjust the image position. Press the Pattern button on 
the remote control, then select Display Position.
When you hear a click, the lens position is...

Making Basic Adjustments25
Making Basic Adjustments
Follow the instructions in this chapter to make basic adjustments to the image shape, size, and 
color, and quality. For further refinements, see “Making Detailed Adjustments” on page 33.
Correcting the Image Shape
If the projected image looks like  or  , use the Keystone function to correct its shape. 
Note: If the image is shaped like  or  , the projector has been placed off to the side of the 
screen and angled toward it. Face the projector straight...

26Making Basic Adjustments
Focusing and Zooming
Sharpen or reduce the focus using the focus ring.
Zoom into or out of the picture using the zoom ring.
Choosing the Aspect Ratio
In many cases, video signals are automatically resized to fit 
on your screen when 
Auto is selected as the Aspect setting. 
You may need to change the size of the image (or aspect 
ratio) for certain image types by pressing the 
Aspect 
button on the remote control.
If your video source is connected to the HDMI, S-Video, 
or...

Making Basic Adjustments27
If the Auto setting is unavailable, you may want to choose one of these settings:
■Normal for standard TV broadcasts, computer images, or images with a 4:3 aspect ratio.
■Zoom for images recorded in 16:9 (wide-screen) format.
■Wide if you want to expand a 4:3 image to 16:9 so it fills the whole screen. This stretches 
only the right and left sides of the image; the central part is unchanged. (You cannot 
select 
Wide when you’re using keystone correction.)
■Squeeze for DVDs or...

28Making Basic Adjustments
Choosing the Color Mode
You can change the Color Mode to automatically adjust brightness, contrast, and color, 
letting you quickly optimize the projected image for various lighting environments. You can 
also select a different color mode for each input source—which is useful if you view different 
types of images from different sources. (For example, you might set the S-Video source to 
Cinema Day if it’s usually used for watching movies with the curtains closed, and set the...

Making Basic Adjustments29
Adjusting the Gamma, Color Temperature, 
and Skin Tones
To further customize the color and image quality, you can adjust the Gamma, abstract Color 
Temperature, and Skin Tone settings using buttons on the remote control. (Not available 
when you’re projecting sRGB images.)
Note: You can fine-tune these and other color and image quality settings using the projector’s 
menu system (see page 35). You can also save combinations of picture settings with the Memory 
feature for easy...

30Making Basic Adjustments
Adjusting the Gamma Setting
You can select from 5 gamma settings (2.0 to 2.4) or customize your own setting from your 
image or a displayed graph. Lower values will increase the contrast of dark areas, but tend to 
blur the bright areas. Higher values will darken the light areas.
1. Press the 
Gamma button. You see the following displayed on the screen:
2. Do one of the following:
■Select one of the numeric correction values and press the Select button. You see 
the setting...