Epson Powerlite Pro Cinema 1080 Ub Users Guide

Making Detailed Adjustments41
■Tracking
Note: This setting only appears when a computer signal is being input to the PC port.
Adjust the tracking to eliminate vertical bands. It is easiest to 
adjust the tracking when the image contains a lot of fine detail 
(such as black text on a white background).
■Sync.
Note: This setting only appears when a computer signal is being input to the PC port.
Adjust the synchronization to eliminate blurriness. For best results, 
make sure the tracking is properly...

42Making Detailed Adjustments
Selecting Memory Settings and Resetting the 
Projector
Your projector comes with 10 memory locations for installers to save customized settings, 
designed to provide the best color quality for each of your video inputs. 
Selecting Memory Settings
You can easily recall the memory settings by using the 
memory button on the remote control.
1. Press the 
Memory button on the remote control. 
2. Select 
Load Memory.
3. Use the arrow buttons to select the desired setting, then...

Making Detailed Adjustments43
Deleting Saved Memory Settings
You can clear all your memory settings at once.
1. Press the 
Menu button on the remote control.
2. Open the 
Reset menu, then select Reset Memory.
3. Press the 
Select button to delete the memory settings.
Note: You can delete memory settings one at a time with the Erase Memory setting under the 
Memory menu.
Resetting the Projector
If the image quality isn’t what you expect, one or more settings may be adjusted improperly. 
If necessary, you...

44Making Detailed Adjustments
■Select Reset Memory to clear all memory settings.
■Select Reset All to return all projector settings to their original defaults (except 
Component, Save Memory, Language, and Lamp).
Customizing Projector Features
Use the settings in this section to adjust the image size and position, suppress on-screen text, 
and select basic setup options.
Image Sizing
Before adjusting any of these settings, make sure you have already selected an appropriate 
aspect ratio for the type of...

Making Detailed Adjustments45
Screen Options
■Messages
Turn this setting off if you want to prevent on-screen messages from appearing (such as 
the no-signal message, or the identifying text that appears when you switch between 
image sources or color modes). 
■Startup Screen
Turn this setting off if you want to prevent the startup screen from appearing while the 
projector is warming up.
■Display Background
Changes the screen that’s used when the projector is not receiving a signal or when you 
press...

46Making Detailed Adjustments
■Component
Change this setting to match the type of equipment connected to the Component port. 
For component video, select 
Auto to let the projector automatically interpret the signal; 
or select 
YCbCr or YPbPr to manually select your video equipment’s signal. Use YCbCr 
for digital movie camera input. Use 
YPbPr for DVD or satellite input.
■Trigger Out
Turn on this setting if you want the Trigger out port to output a 12-volt signal while 
the projector is operating. You...

Maintenance47
Maintenance
Your projector needs little maintenance. All you need to do on a regular basis is keep the lens 
clean. You also may need to clean the air filter to prevent overheating.
Warning: Before you clean any part of the projector, turn it off and unplug the power cord. Never 
open any cover on the projector, except the lamp and filter covers. Dangerous electrical voltages 
in the projector can injure you severely. Do not try to service this product yourself, except as 
specifically...

48Maintenance
Cleaning the Projector Case
Before you clean the case, turn off the projector and unplug the power cord.
■To remove dirt or dust, wipe the case 
with a soft, dry, lint-free cloth.
■To remove stubborn dirt or stains, 
moisten a soft cloth with water and a 
neutral detergent. Then wipe the case 
and dry it with a dry cloth.
Caution: Never use wax, alcohol, benzene, 
thinner, or other chemical detergents. These can damage the case.
Cleaning and Replacing the Air Filter
Your projector includes...

Maintenance49
5. If you need to replace the filter, release the tab and lift up the cover.
6. Remove the old filter and replace it with a new one.
7. To replace the cover, insert the tabs and press down until the cover clicks into place. 

50Maintenance
Replacing the Lamp
The projection lamp lasts for up to 3000 hours. You can use the Info menu to check how 
long it’s been in use (see page 53). It’s time to replace the lamp when:
■The projected image gets darker or starts to 
deteriorate.
■The projector’s warning light flashes red at half-second 
intervals.
■The message Replace the lamp appears on the screen 
when you start projecting.
Note: Lamp life results will vary depending on mode selected, environmental conditions, and 
usage. 
Turn...