Epson Powerlite Home Cinema 750hd Users Guide
Here you can view all the pages of manual Epson Powerlite Home Cinema 750hd Users Guide. The Epson manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 111
Power light Lamp light Temperature Status andsolution light Red Off Red Projector hasoverheated andturned off.Leave it turned offtocool down. Oncethetemperature light turns offand thepower lightturns orange (after about fiveminutes), trythe suggestions below: • Make surethatthevents andairfilter arenot clogged withdust orobstructed bynearby objects. • Clean orreplace theairfilter. • Ifoperating theprojector athigh altitude, turnon High Altitude Mode. • Ifthe problem persists,...
Page 112
Parent topic:Solving Problems Related references Projector SetupSettings -Extended Menu Where toGet Help Related tasks Cleaning theAirFilter andVents Replacing theAirFilter Replacing theLamp Using theProjector HelpDisplays You candisplay information tohelp yousolve common problems usingtheprojectors Helpsystem. 1. Turn onthe projector. 2. Press theHelp button onthe projector orthe remote control. You seetheHelp menu. 3. Use theupand down arrow buttons tohighlight theproblem youwant...
Page 113
Solutions WhentheImage Brightness orColors areIncorrect Solutions Whena3D Image DoesNotDisplay Correctly Solutions toSound Problems Parent topic:Solving Problems Solutions WhenNoImage Appears If no image appears, trythe following solutions: • Make surethelens cover isopen oroff. • Press theA/V Mute button onthe remote controltosee ifthe image wastemporarily turnedoff. • Make sureallnecessary cablesaresecurely connected andthepower ison for the projector and connected videosources. • Press...
Page 114
Related tasks Unlocking theProjector s Buttons Solutions WhenImage isIncorrect UsingtheUSB Display Function If no image appears orifthe image appears incorrectly usingtheUSB Display function, trythe following solutions: • Press theUSB button onthe remote control. • Make suretheUSB Display software hasinstalled correctly. Installitmanually ifnecessary. • With MacOSX,select theUSB Display iconinthe Dock orfrom theApplications folder. • For images projected withWindows MediaCenter, reducethescreen...
Page 115
Displaying FromaPC Laptop If you seetheNo Signal message whenyoudisplay fromaPC laptop, youneed toset upthe laptop to display onanexternal monitor. 1. Hold down thelaptops Fnkey and press thekey labelled withamonitor iconorCRT/LCD .(See your laptop manual fordetails.) Waitafew seconds foranimage toappear. 2. Todisplay onboth thelaptops monitorandtheprojector, trypressing thesame keysagain. 3. Ifthe same image isnot displayed bythe laptop andprojector, checktheWindows Displayutilityto make...
Page 116
Solutions WhenOnlyaPartial ImageAppears If only apartial computer imageappears, trythe following solutions: • Press theAuto button onthe remote controltooptimize theimage signal. • Try adjusting theimage position usingthePosition menusetting. • Press theAspect buttononthe remote controltoselect adifferent imageaspect ratio. • Ifyou zoomed intoorout ofthe image usingtheE-Zoom buttons,presstheEsc button twicetoreturn to afull display. • Check yourcomputer displaysettings todisable dualdisplay...
Page 117
Solutions WhentheImage Contains NoiseorStatic If the projected imageseems tocontain electronic interference (noise)orstatic, trythe following solutions: • Check thecables connecting yourcomputer orvideo source tothe projector. Theyshould be: • Separated fromthepower cordtoprevent interference • Securely connected atboth ends • Not connected toan extension cable • Check thesettings onthe projectors Signalmenutomake suretheymatch thevideo source. If available foryour video source,...
Page 118
• Position theprojector closeenough tothe screen. • Position theprojector sothe keystone adjustment angleisnot sowide thatitdistorts theimage. • Turn onautomatic keystoneadjustment inthe projectors menus. • Adjust theSharpness settingtoimprove imagequality. • Ifyou areprojecting fromacomputer, presstheAuto button onthe remote controltoautomatically adjust thetracking andsync. Ifany bands oroverall blurriness remain,displayauniformly patterned image onthe screen andmanually adjusttheTracking...
Page 119
• Ifthe image hasbeen progressively darkening,youmay need toreplace theprojector lampsoon. Parent topic:Solving ImageorSound Problems Related concepts Projector LampMaintenance Related references Image Quality Settings -Image Menu Input Signal Settings -Signal Menu Projector FeatureSettings -Settings Menu Solutions Whena3D Image DoesNotDisplay Correctly If a 3D image doesnotdisplay correctly, trythe following solutions: • Press the2D/3D buttononthe remote controltoswitch to3D mode,...
Page 120
Optional Equipment andReplacement Parts 3D Viewing Range Related tasks Charging the3DGlasses Pairing the3DGlasses withtheProjector Solutions toSound Problems If there isno sound whenyouexpect itor the volume istoo low orhigh, trythe following solutions: • Adjust theprojectors volumesettings. • Press theA/V Mute button onthe remote controltoresume videoandaudio ifthey were temporarily stopped. • Press theSource Searchbuttontoswitch tothe correct inputsource, ifnecessary. • Check yourcomputer...