Epson Powerlite Home Cinema 2000 Users Guide

8.
Push inthe lamp firmly andtighten thescrews tosecure it.
 9.
Replace thelamp cover andtighten thescrew tosecure it.
 Note:
Besure thelamp cover issecurely installedorthe lamp willnot come on.
 Reset
thelamp timer tozero tokeep trackofthe new lamp ’s usage.
 101   

Parent
topic:Projector LampMaintenance
 Related
tasks
 Resetting
theLamp Timer
 Resetting
theLamp Timer
 You
must reset thelamp timer afterreplacing theprojectors lamptoclear thelamp replacement
 message
andtokeep trackoflamp usage correctly.
 Note:
Donot reset thelamp timer ifyou have notreplaced thelamp toavoid inaccurate lampusage
 information.

1.
Turn onthe projector.
 2.
Press theMenu button.
 3.
Select theReset menuandpress Enter.
 4.
Select ResetLampHours andpress Enter.
 You
seeaprompt...

Replacing
theRemote ControlBatteries
 The
remote controlusestwoAAmanganese oralkaline batteries. Replacethebatteries assoon asthey
 run
out.
 Caution:
Useonly thetype ofbatteries specified inthis manual. Donot install batteries ofdifferent types,
 or
mix new andoldbatteries.
 1.
Open thebattery coverasshown.
 2.
Remove theoldbatteries.
 Warning:
Ifthe battery fluidhasleaked, wipeitaway withasoft cloth andavoid getting thefluid on
 your
hands. Ifitgets onyour hands, washthemimmediately toavoid injury....

4.
Close thebattery coverandpress itdown untilitclicks intoplace.
 Warning:
Disposeofused batteries according tolocal regulations. Donot expose batteries toheat
 or
flame. Keepbatteries outofthe reach ofchildren; theyarechoking hazards andarevery
 dangerous
ifswallowed.
 Parent
topic:Projector Maintenance
 Related
references
 Remote
ControlSpecifications
 Transporting
theProjector
 The
projector containsprecision parts,someofwhich areglass. Follow theseguidelines totransport or
 ship
theprojector...

Solving
Problems
 Check
thesolutions inthese sections ifyou have anyproblems usingtheprojector.
 Projection
ProblemTips
 Projector
LightStatus
 Solving
ImageorSound Problems
 Solving
Projector orRemote ControlOperation Problems
 Where
toGet Help
 Projection
ProblemTips
 If
the projector isnot working properly, tryturning itoff and unplugging it.Then plugitback inand turn it
 on.

If
this does notsolve theproblem, checkthefollowing:
 •
The lights onthe projector mayindicate whattheproblem is.
 •
The...

1
 Power
light
 2
 Status
light
 3
 Lamp
light
 4
 Temp
(temperature) light
 Power
light
 Status
light
 Lamp
light
 Temp
light
 Status
andsolution
 Blue
 Blue
 Off
 Off
 Normal
operation.
 Blue
 Flashing
blue
 Off
 Off
 Warming
up.Wait foranimage to
 appear.

Blue
 Off
 Off
 Off
 Standby
orsleep mode.
 Blue
 Flashing
blue
 Off
 Off
 Shutting
down.(When theStatus light
 stops
flashing, youcanunplug the
 projector.)

106  

Power
light
 Status
light
 Lamp
light
 Temp
light
 Status
andsolution
 Blue
 Varies
 Off
 Flashing
 Projector
istoo hot.
 orange

•
Make surethatthevents andair
 filter
arenotclogged withdust or
 obstructed
bynearby objects.
 •
Clean orreplace theairfilter.
 •
Make suretheenvironmental
 temperature
isnot toohot.
 Off
 Flashing
blue
 Off
 Orange
 Projector
hasoverheated andturned
 off.
Leave itturned offtocool down.
 After
about fiveminutes, dothe
 following:

•
Make surethatthevents andair
 filter...

Power
light
 Status
light
 Lamp
light
 Temp
light
 Status
andsolution
 Flashing
blue
 Varies
 Flashing
 Off
 Replace
thelamp soon toavoid
 orange
 damage.
Donot continue usingthe
 projector.

Off
 Flashing
blue
 Off
 Flashing
 A
fan orsensor hasaproblem. Turn
 orange
 the
projector off,unplug it,and
 contact
Epsonforhelp.
 Off
 Flashing
blue
 Flashing
 Flashing
 Auto
Iriserror. Turntheprojector off,
 orange
 orange
 unplug
it,and contact Epsonforhelp.
 Off
 Flashing
blue
 Orange
 Orange
 Power...

Solutions
WhentheImage isNot Rectangular
 Solutions
WhentheImage Contains NoiseorStatic
 Solutions
WhentheImage isFuzzy orBlurry
 Solutions
WhentheImage Brightness orColors areIncorrect
 Solutions
Whena3D Image DoesNotDisplay Correctly
 Solutions
toSound Problems
 Parent
topic:Solving Problems
 Solutions
WhenNoImage Appears
 If
no image appears, trythe following solutions:
 •
Make surethelens cover isopen allthe way oroff.
 •
Press theA/V Mute button onthe remote controltosee ifthe image wastemporarily...

Solutions
WhenNo Signal Message Appears
 If
the No Signal message appears,trythe following solutions:
 •
Press theSource buttononthe projector repeatedly tocycle through theavailable sources.Waita
 few
seconds foranimage toappear.
 •
Turn onthe connected computerorvideo source, andpress itsplay button tobegin yourpresentation,
 if
necessary.
 •
Check theconnection fromtheprojector toyour video sources.
 •
Ifyou areprojecting fromalaptop computer, makesureitis set uptodisplay onanexternal monitor.
 •...