Epson Powerlite Home 20 Quick Setup Manual

Choosing a location
The easiest way to set up your projector is to place it on a table
in front of your screen or wall, or on a high shelf behind you.
See the User’s Guidefor other ways of setting up the projector.
Table Shelf
The projector does not have to be aligned with the middle of the
screen. Just make sure it faces straight ahead (at a 90-degree angle
to the screen), and then use the horizontal lens shift dial to position
the image (see “Adjust the image” on the back of this sheet).
The distance...

Choosing a location
The easiest way to set up your projector is to place it on a table
in front of your screen or wall, or on a high shelf behind you.
See the User’s Guidefor other ways of setting up the projector.
Table Shelf
The projector does not have to be aligned with the middle of the
screen. Just make sure it faces straight ahead (at a 90-degree angle
to the screen), and then use the horizontal lens shift dial to position
the image (see “Adjust the image” on the back of this sheet).
The distance...

Choosing a location
The easiest way to set up your projector is to place it on a table
in front of your screen or wall, or on a high shelf behind you.
See the User’s Guide for other ways of setting up the projector.
Table Shelf
The projector does not have to be aligned with the middle of the
screen. Just make sure it faces straight ahead (at a 90-degree angle
to the screen), and then use the horizontal lens shift dial to position
the image (see “Adjust the image” on the back of this sheet).
The distance...

5Adjust the image
If you see a No signalmessage instead of
your video image, make sure your video
equipment is turned on. Press the Source
button on the projector or remote control to
select the port to which your equipment is
connected. 
1Rotate the focus ring to sharpen the image. Rotate the zoom
ring to reduce or enlarge it. 
2If the image is not centered on the screen, use the lens shift
dials to adjust its position.
To make the best use of this feature, keep the projector level and
do not extend its...

5Adjust the image
If you see a No signalmessage instead of
your video image, make sure your video
equipment is turned on. Press the Source
button on the projector or remote control to
select the port to which your equipment is
connected. 
1Rotate the focus ring to sharpen the image. Rotate the zoom
ring to reduce or enlarge it. 
2If the image is not centered on the screen, use the lens shift
dials to adjust its position.
To make the best use of this feature, keep the projector level and
do not extend its...

5Adjust the image
If you see a No signalmessage instead of
your video image, make sure your video
equipment is turned on. Press the Source
button on the projector or remote control to
select the port to which your equipment is
connected. 
1Rotate the focus ring to sharpen the image. Rotate the zoom
ring to reduce or enlarge it. 
2If the image is not centered on the screen, use the lens shift
dials to adjust its position.
To make the best use of this feature, keep the projector level and
do not extend its...