Epson Powerlite G5000 Quick Reference Manual
Have a look at the manual Epson Powerlite G5000 Quick Reference Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
PowerLite G5000 Quick Reference Epson, Instant Off, and Quick Corner are registered trademarks and Epson Exceed Your Vision is a registered logomark of Seiko Epson Corporation. PowerLite and PrivateLine are registered trademarks of Epson America, Inc. General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks. This information is subject to change without notice. © 2008 Epson America, Inc. 11/08 CPD-27055 Printed in XXXXXX This Quick Reference card gives brief instructions on connecting your PowerLite® projector and using common features. For details, install and view the User’s Guide from the projector’s CD-ROM. Remote Control Map Turn the projector on and off Select a source(Note: The BNC, EasyMP, and HDMI buttons are not applicable to this projector.) Open projector menus Navigate through menu settings; move pointer Select menu settings Change slides in PowerPoint® (optional wireless mouse receiver required) Temporarily turn off display and audio Automatically adjust computer image Change the aspect ratio Display on-screen help Control volume Switch image sources Remote control ID switch Open menus assigned by user Cancel current operation or return to previous menu Activate screen pointer Zoom in and out Freeze the image; sound continues Select from 9 color modes Use numeric keys to enter passwords, IP settings, etc. Enter passwords VGA cable Component-to-VGA cable S-video cable Composite video cable Audio cableCoax video cable Replacement Parts Product Product Number Replacement lamp V13H010L47 Air filter V13H134A17 You can purchase replacement parts from an Epson authorized reseller. See “Where To Get Help” inside this card for more information. Note: To play sound with this projector, you must connect optional external speakers. See the User’s Guide. Stereo mini-jack cable
Switching Between Image Sources Press the Source Search button on the projector Press the Search button or one of the Source buttons on the remote control Note: The BNC, EasyMP, and HDMI buttons are not applicable to this projector. Adjusting Image Position If the projector is mounted to the ceiling, use the vertical lens shift dial to move your image up or down or use the horizontal lens shift dial to move your image left or right. You can also use the ceiling mount to adjust the position. Horizontal lens shift dial Vertical lens shift dial If the projector is on a table, place it so it faces the screen as squarely as possible. To raise the image, use the vertical lens shift dial as shown above, or press the blue foot release lever and lift the front of the projector to extend the front adjustable foot. Release the lever to lock the foot in position. Correcting Image Shape • If your image looks like or , press the or button on the projector to correct it. You can also use the remote control to correct the image shape (see the User’s Guide). • If your image looks likeor, press the or button to correct it. You can also use the remote control to correct the image shape (see the User’s Guide). • If your image is uneven on all sides, you can use Quick Corner® to adjust the shape. See the User’s Guide. Changing the Aspect Ratio Press the Aspect button on the remote control to change the aspect ratio. For images input through the Computer1 or Computer2 ports, select Normal to automatically resize the image. Turning the Projector Off Press the power button to turn the projector off. At the confirmation message, press the power button again. Note: If the Direct Power On function is enabled, you can unplug the projector or flip the switch controlling the outlet to which the projector is connected instead. With Epson’s Instant Off® technology, you don’t have to wait for the projector to cool down; just turn it off or unplug it when you’re done. You can fine-tune the height or level the image by turning any of the projector’s adjustable feet. Use the horizontal lens shift dial to move your image left or right. Focusing and Zooming Turn the focus ring to sharpen the image. Turn the zoom ring to reduce/enlarge the image. Installing the Manuals 1. Insert the projector CD in your computer’s CD or DVD drive. (Double-click the Epson installer icon, if necessary.) 2. Select your language, follow the instructions on the screen to register, then click User’s Guide, EMP Monitor Operation Guide (Windows) or User’s Guide (Macintosh) to install the manuals. (If you are using Windows and you don’t have Adobe® Reader®, click Adobe Reader to install it also.) Then click Exit. 3. To view the manuals, double-click the PowerLite G5000 User’s Guide or EMP Monitor Operation Guide (for Windows users only) icon on your computer’s desktop. Turning the Projector On 1. Turn on your computer or image source. 2. Remove the lens cover. 3. Press the power button. After the power light stays green, the projector is ready. Note: If the Direct Power On function is enabled, you can turn the projector on without pressing the power button; just plug it in or flip the switch controlling the outlet to which the projector is connected. To turn on this feature, see the User’s Guide. 4. If your image does not appear, see “Switching Between Image Sources” or “Troubleshooting.” Troubleshooting If you see a blank screen or the message No signal • Make sure the power light on the projector is green and not flashing, and the lens cover is removed. • Make sure the cables are connected correctly. See the User’s Guide. • You may need to change the image source. See “Switching Between Image Sources.” (Also make sure the source device is turned on.) If the projector and the notebook don’t display the same image Windows®: Hold down the Fn key and press the function key on your notebook (such asor CRT/LCD) until you see the display on both monitors. If that does not work, open the Windows Control Panel, click Display, Settings, and Advanced. Make sure the external monitor port is set as your primary display. See your computer’s documentation or online help for details. Macintosh®: From the Apple® menu, select System Preferences, Displays, Detect Displays, VGA Display or Color LCD, and Arrangement or Arrange. Then select Mirror Displays. Where To Get Help Internet support Visit Epson’s support website at epson.com/support and select your product for solutions to common problems. You can download utilities and documentation, get FAQs and troubleshooting advice, or e-mail Epson with your questions. Speak to a support representative To use the Epson PrivateLine® Support service, call (800) 637-7661 and enter the PIN on the included Epson PrivateLine Support card. This service is available 6 AM to 6 PM, Pacific Time, Monday through Friday, for the duration of your warranty period. You may also speak with a projector support specialist by dialing one of the following numbers. (Toll or long distance charges may apply.) U.S.: (562) 276-4394, 6 AM to 6 PM, Pacific Time, Monday-Friday Canada: (905) 709-3839, 6 AM to 6 PM, Pacific Time, Monday-Friday Days and hours of support are subject to change without notice. Purchase supplies and accessories You can purchase screens and other accessories from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online at www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales).
Switching Between Image Sources Press the Source Search button on the projector Press the Search button or one of the Source buttons on the remote control Note: The BNC, EasyMP, and HDMI buttons are not applicable to this projector. Adjusting Image Position If the projector is mounted to the ceiling, use the vertical lens shift dial to move your image up or down or use the horizontal lens shift dial to move your image left or right. You can also use the ceiling mount to adjust the position. Horizontal lens shift dial Vertical lens shift dial If the projector is on a table, place it so it faces the screen as squarely as possible. To raise the image, use the vertical lens shift dial as shown above, or press the blue foot release lever and lift the front of the projector to extend the front adjustable foot. Release the lever to lock the foot in position. Correcting Image Shape • If your image looks like or , press the or button on the projector to correct it. You can also use the remote control to correct the image shape (see the User’s Guide). • If your image looks likeor, press the or button to correct it. You can also use the remote control to correct the image shape (see the User’s Guide). • If your image is uneven on all sides, you can use Quick Corner® to adjust the shape. See the User’s Guide. Changing the Aspect Ratio Press the Aspect button on the remote control to change the aspect ratio. For images input through the Computer1 or Computer2 ports, select Normal to automatically resize the image. Turning the Projector Off Press the power button to turn the projector off. At the confirmation message, press the power button again. Note: If the Direct Power On function is enabled, you can unplug the projector or flip the switch controlling the outlet to which the projector is connected instead. With Epson’s Instant Off® technology, you don’t have to wait for the projector to cool down; just turn it off or unplug it when you’re done. You can fine-tune the height or level the image by turning any of the projector’s adjustable feet. Use the horizontal lens shift dial to move your image left or right. Focusing and Zooming Turn the focus ring to sharpen the image. Turn the zoom ring to reduce/enlarge the image. Installing the Manuals 1. Insert the projector CD in your computer’s CD or DVD drive. (Double-click the Epson installer icon, if necessary.) 2. Select your language, follow the instructions on the screen to register, then click User’s Guide, EMP Monitor Operation Guide (Windows) or User’s Guide (Macintosh) to install the manuals. (If you are using Windows and you don’t have Adobe® Reader®, click Adobe Reader to install it also.) Then click Exit. 3. To view the manuals, double-click the PowerLite G5000 User’s Guide or EMP Monitor Operation Guide (for Windows users only) icon on your computer’s desktop. Turning the Projector On 1. Turn on your computer or image source. 2. Remove the lens cover. 3. Press the power button. After the power light stays green, the projector is ready. Note: If the Direct Power On function is enabled, you can turn the projector on without pressing the power button; just plug it in or flip the switch controlling the outlet to which the projector is connected. To turn on this feature, see the User’s Guide. 4. If your image does not appear, see “Switching Between Image Sources” or “Troubleshooting.” Troubleshooting If you see a blank screen or the message No signal • Make sure the power light on the projector is green and not flashing, and the lens cover is removed. • Make sure the cables are connected correctly. See the User’s Guide. • You may need to change the image source. See “Switching Between Image Sources.” (Also make sure the source device is turned on.) If the projector and the notebook don’t display the same image Windows®: Hold down the Fn key and press the function key on your notebook (such asor CRT/LCD) until you see the display on both monitors. If that does not work, open the Windows Control Panel, click Display, Settings, and Advanced. Make sure the external monitor port is set as your primary display. See your computer’s documentation or online help for details. Macintosh®: From the Apple® menu, select System Preferences, Displays, Detect Displays, VGA Display or Color LCD, and Arrangement or Arrange. Then select Mirror Displays. Where To Get Help Internet support Visit Epson’s support website at epson.com/support and select your product for solutions to common problems. You can download utilities and documentation, get FAQs and troubleshooting advice, or e-mail Epson with your questions. Speak to a support representative To use the Epson PrivateLine® Support service, call (800) 637-7661 and enter the PIN on the included Epson PrivateLine Support card. This service is available 6 AM to 6 PM, Pacific Time, Monday through Friday, for the duration of your warranty period. You may also speak with a projector support specialist by dialing one of the following numbers. (Toll or long distance charges may apply.) U.S.: (562) 276-4394, 6 AM to 6 PM, Pacific Time, Monday-Friday Canada: (905) 709-3839, 6 AM to 6 PM, Pacific Time, Monday-Friday Days and hours of support are subject to change without notice. Purchase supplies and accessories You can purchase screens and other accessories from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online at www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales).
Switching Between Image Sources Press the Source Search button on the projector Press the Search button or one of the Source buttons on the remote control Note: The BNC, EasyMP, and HDMI buttons are not applicable to this projector. Adjusting Image Position If the projector is mounted to the ceiling, use the vertical lens shift dial to move your image up or down or use the horizontal lens shift dial to move your image left or right. You can also use the ceiling mount to adjust the position. Horizontal lens shift dial Vertical lens shift dial If the projector is on a table, place it so it faces the screen as squarely as possible. To raise the image, use the vertical lens shift dial as shown above, or press the blue foot release lever and lift the front of the projector to extend the front adjustable foot. Release the lever to lock the foot in position. Correcting Image Shape • If your image looks like or , press the or button on the projector to correct it. You can also use the remote control to correct the image shape (see the User’s Guide). • If your image looks likeor, press the or button to correct it. You can also use the remote control to correct the image shape (see the User’s Guide). • If your image is uneven on all sides, you can use Quick Corner® to adjust the shape. See the User’s Guide. Changing the Aspect Ratio Press the Aspect button on the remote control to change the aspect ratio. For images input through the Computer1 or Computer2 ports, select Normal to automatically resize the image. Turning the Projector Off Press the power button to turn the projector off. At the confirmation message, press the power button again. Note: If the Direct Power On function is enabled, you can unplug the projector or flip the switch controlling the outlet to which the projector is connected instead. With Epson’s Instant Off® technology, you don’t have to wait for the projector to cool down; just turn it off or unplug it when you’re done. You can fine-tune the height or level the image by turning any of the projector’s adjustable feet. Use the horizontal lens shift dial to move your image left or right. Focusing and Zooming Turn the focus ring to sharpen the image. Turn the zoom ring to reduce/enlarge the image. Installing the Manuals 1. Insert the projector CD in your computer’s CD or DVD drive. (Double-click the Epson installer icon, if necessary.) 2. Select your language, follow the instructions on the screen to register, then click User’s Guide, EMP Monitor Operation Guide (Windows) or User’s Guide (Macintosh) to install the manuals. (If you are using Windows and you don’t have Adobe® Reader®, click Adobe Reader to install it also.) Then click Exit. 3. To view the manuals, double-click the PowerLite G5000 User’s Guide or EMP Monitor Operation Guide (for Windows users only) icon on your computer’s desktop. Turning the Projector On 1. Turn on your computer or image source. 2. Remove the lens cover. 3. Press the power button. After the power light stays green, the projector is ready. Note: If the Direct Power On function is enabled, you can turn the projector on without pressing the power button; just plug it in or flip the switch controlling the outlet to which the projector is connected. To turn on this feature, see the User’s Guide. 4. If your image does not appear, see “Switching Between Image Sources” or “Troubleshooting.” Troubleshooting If you see a blank screen or the message No signal • Make sure the power light on the projector is green and not flashing, and the lens cover is removed. • Make sure the cables are connected correctly. See the User’s Guide. • You may need to change the image source. See “Switching Between Image Sources.” (Also make sure the source device is turned on.) If the projector and the notebook don’t display the same image Windows®: Hold down the Fn key and press the function key on your notebook (such asor CRT/LCD) until you see the display on both monitors. If that does not work, open the Windows Control Panel, click Display, Settings, and Advanced. Make sure the external monitor port is set as your primary display. See your computer’s documentation or online help for details. Macintosh®: From the Apple® menu, select System Preferences, Displays, Detect Displays, VGA Display or Color LCD, and Arrangement or Arrange. Then select Mirror Displays. Where To Get Help Internet support Visit Epson’s support website at epson.com/support and select your product for solutions to common problems. You can download utilities and documentation, get FAQs and troubleshooting advice, or e-mail Epson with your questions. Speak to a support representative To use the Epson PrivateLine® Support service, call (800) 637-7661 and enter the PIN on the included Epson PrivateLine Support card. This service is available 6 AM to 6 PM, Pacific Time, Monday through Friday, for the duration of your warranty period. You may also speak with a projector support specialist by dialing one of the following numbers. (Toll or long distance charges may apply.) U.S.: (562) 276-4394, 6 AM to 6 PM, Pacific Time, Monday-Friday Canada: (905) 709-3839, 6 AM to 6 PM, Pacific Time, Monday-Friday Days and hours of support are subject to change without notice. Purchase supplies and accessories You can purchase screens and other accessories from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online at www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales).
PowerLite G5000 Quick Reference Epson, Instant Off, and Quick Corner are registered trademarks and Epson Exceed Your Vision is a registered logomark of Seiko Epson Corporation. PowerLite and PrivateLine are registered trademarks of Epson America, Inc. General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks. This information is subject to change without notice. © 2008 Epson America, Inc. 11/08 CPD-27055 Printed in XXXXXX This Quick Reference card gives brief instructions on connecting your PowerLite® projector and using common features. For details, install and view the User’s Guide from the projector’s CD-ROM. Remote Control Map Turn the projector on and off Select a source(Note: The BNC, EasyMP, and HDMI buttons are not applicable to this projector.) Open projector menus Navigate through menu settings; move pointer Select menu settings Change slides in PowerPoint® (optional wireless mouse receiver required) Temporarily turn off display and audio Automatically adjust computer image Change the aspect ratio Display on-screen help Control volume Switch image sources Remote control ID switch Open menus assigned by user Cancel current operation or return to previous menu Activate screen pointer Zoom in and out Freeze the image; sound continues Select from 9 color modes Use numeric keys to enter passwords, IP settings, etc. Enter passwords VGA cable Component-to-VGA cable S-video cable Composite video cable Audio cableCoax video cable Replacement Parts Product Product Number Replacement lamp V13H010L47 Air filter V13H134A17 You can purchase replacement parts from an Epson authorized reseller. See “Where To Get Help” inside this card for more information. Note: To play sound with this projector, you must connect optional external speakers. See the User’s Guide. Stereo mini-jack cable
PowerLite G5000 Quick Reference Epson, Instant Off, and Quick Corner are registered trademarks and Epson Exceed Your Vision is a registered logomark of Seiko Epson Corporation. PowerLite and PrivateLine are registered trademarks of Epson America, Inc. General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks. This information is subject to change without notice. © 2008 Epson America, Inc. 11/08 CPD-27055 Printed in XXXXXX This Quick Reference card gives brief instructions on connecting your PowerLite® projector and using common features. For details, install and view the User’s Guide from the projector’s CD-ROM. Remote Control Map Turn the projector on and off Select a source(Note: The BNC, EasyMP, and HDMI buttons are not applicable to this projector.) Open projector menus Navigate through menu settings; move pointer Select menu settings Change slides in PowerPoint® (optional wireless mouse receiver required) Temporarily turn off display and audio Automatically adjust computer image Change the aspect ratio Display on-screen help Control volume Switch image sources Remote control ID switch Open menus assigned by user Cancel current operation or return to previous menu Activate screen pointer Zoom in and out Freeze the image; sound continues Select from 9 color modes Use numeric keys to enter passwords, IP settings, etc. Enter passwords VGA cable Component-to-VGA cable S-video cable Composite video cable Audio cableCoax video cable Replacement Parts Product Product Number Replacement lamp V13H010L47 Air filter V13H134A17 You can purchase replacement parts from an Epson authorized reseller. See “Where To Get Help” inside this card for more information. Note: To play sound with this projector, you must connect optional external speakers. See the User’s Guide. Stereo mini-jack cable