Epson Powerlite D6155w Quick Setup Manual
Have a look at the manual Epson Powerlite D6155w Quick Setup Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Quick Setup
Before using the projector, make sure you read the safety instructions in the
User’s Guide on your projector CD.
Connect the projector
Choose from the following connections:
Computer Monitor Port
Connect a computer using the VGA cable that came with the projector.
Connect one end of the cable to the projector’s Computer1 or Computer2
port, and the other end to your computer’s monitor port. If you are using
a notebook, switch it to external display (see “Troubleshooting”). You can also
connect an audio cable. See the User's Guide on your projector CD for details.
Wired Network
You can connect the projector to your network using an Ethernet® cable.
See “Project over a wired network” for instructions.
Wireless Network
You can connect the projector wirelessly over an 802.11b, 802.11g, or 802.11n
wireless network using the optional Epson wireless LAN module. See “Project
wirelessly” on the back of this sheet for instructions.” on the back of this sheet for instructions.for instructions.
Video Device
Connect up to 5 video devices and use the Source Search button on the
projector or remote control to switch between them. (All cables are optional).
See the User's Guide on your projector CD for details.
RCA video cable (composite video)
Component video to VGA cable Audio cable
S-Video cable
Audio cable
HDMI cable
Camera, USB Device, or Epson Document Camera DC-06
Connect a digital camera, USB flash drive, USB storage device, or Epson
document camera DC-06 to the projector’s USB TypeA (flat) port.
If you connect a digital camera, USB flash drive, or USB storage device, you can
use the projector’s Slideshow feature. See the User’s Guide on your projector
CD for details.
External Monitor and External Speakers
You can also connect an external monitor and external speakers to your
projector to enhance your presentations. See the User’s Guide on your projector
CD for details.
Turn on your equipment
1 Turn on your computer or video source.
2 Plug in the projector.
The power light on the projector turns orange.
3 Press thepower button on the projector or remote control.
Power button
Power light
The power light flashes green, then stays on.
Note: To shut down the projector, press thepower button twice, then
unplug it. You don’t have to wait for the projector to cool down.
4 The default language of the menu system is English. To select another
language, press the Menu button on the remote control. Select
Extended and press Enter. Select Language and press Enter. Select
your language and press Enter. Press the Menu button to exit the
menu system.
Adjust the image
1 If you don’t see an image, press the Source Search button on the
projector or the remote control to select the image source.
Note: If you still see a blank screen or have other display problems, see
the troubleshooting tips on the back of this sheet.
2 To raise the image, press the foot release button and lift the front of the
projector. Release the button to lock the foot in position.
3 Open the zoom/focus ring cover and rotate the focus ring to sharpen the
image.
Focus ring
Zoom/focus ring cover
4 Turn the zoom ring to reduce or enlarge the image.
Zoom ring
5 If your image looks likeor, you’ve placed the projector off to
one side of the screen at an angle. Place it directly in front of the center
of the screen, facing the screen squarely. Or press the or buttons on
the projector to correct it.
6 If your image looks likeor, press theorbuttons on the
projector to correct it.
Using the remote control
Make sure the batteries are installed as shown (two AA batteries).
Choose which source
to display
Turn projector
on and off
Access projector
menus
Turn off projector
display and sound
Control projector volume
Navigate projector menus
For more information on using the remote control, see the User’s Guide on your
projector CD.
Project over a wired
network
Follow the steps here to configure your projector for your wired network
using the projector’s menu system.
1 Plug in and turn on the projector.
2 Press the Menu button on the remote control, select the Network
menu, and press Enter.
3 Select Network Configuration and press Enter.
4 Select the Basic menu and press Enter.
5 Select the Projector Name setting and enter a name (up to 16
characters long) to identify your projector over the network.
Use the displayed keyboard to enter characters. Press the arrow buttons
on the remote control to highlight the characters and press Enter to
select them.
Note: See the User’s Guide on the projector CD for information on
adding passwords.
6 Select the Wired LAN menu and press Enter.
7 Choose IP Settings and press Enter.
8 If your network assigns addresses automatically, select IP Settings and
turn on the DHCP setting. If not, turn off the DHCP setting and enter
the projector’s IP Address, Subnet Mask, and Gateway Address,
as needed.
9 To prevent the IP address from appearing on the network standby
screen, set the IP Address Display setting to Off.
PowerLite® D6150/D6155W/D6250
*412046400**412046400*
Quick Setup
Before using the projector, make sure you read the safety instructions in the
User’s Guide on your projector CD.
Connect the projector
Choose from the following connections:
Computer Monitor Port
Connect a computer using the VGA cable that came with the projector.
Connect one end of the cable to the projector’s Computer1 or Computer2
port, and the other end to your computer’s monitor port. If you are using
a notebook, switch it to external display (see “Troubleshooting”). You can also
connect an audio cable. See the User's Guide on your projector CD for details.
Wired Network
You can connect the projector to your network using an Ethernet® cable.
See “Project over a wired network” for instructions.
Wireless Network
You can connect the projector wirelessly over an 802.11b, 802.11g, or 802.11n
wireless network using the optional Epson wireless LAN module. See “Project
wirelessly” on the back of this sheet for instructions.” on the back of this sheet for instructions.for instructions.
Video Device
Connect up to 5 video devices and use the Source Search button on the
projector or remote control to switch between them. (All cables are optional).
See the User's Guide on your projector CD for details.
RCA video cable (composite video)
Component video to VGA cable Audio cable
S-Video cable
Audio cable
HDMI cable
Camera, USB Device, or Epson Document Camera DC-06
Connect a digital camera, USB flash drive, USB storage device, or Epson
document camera DC-06 to the projector’s USB TypeA (flat) port.
If you connect a digital camera, USB flash drive, or USB storage device, you can
use the projector’s Slideshow feature. See the User’s Guide on your projector
CD for details.
External Monitor and External Speakers
You can also connect an external monitor and external speakers to your
projector to enhance your presentations. See the User’s Guide on your projector
CD for details.
Turn on your equipment
1 Turn on your computer or video source.
2 Plug in the projector.
The power light on the projector turns orange.
3 Press thepower button on the projector or remote control.
Power button
Power light
The power light flashes green, then stays on.
Note: To shut down the projector, press thepower button twice, then
unplug it. You don’t have to wait for the projector to cool down.
4 The default language of the menu system is English. To select another
language, press the Menu button on the remote control. Select
Extended and press Enter. Select Language and press Enter. Select
your language and press Enter. Press the Menu button to exit the
menu system.
Adjust the image
1 If you don’t see an image, press the Source Search button on the
projector or the remote control to select the image source.
Note: If you still see a blank screen or have other display problems, see
the troubleshooting tips on the back of this sheet.
2 To raise the image, press the foot release button and lift the front of the
projector. Release the button to lock the foot in position.
3 Open the zoom/focus ring cover and rotate the focus ring to sharpen the
image.
Focus ring
Zoom/focus ring cover
4 Turn the zoom ring to reduce or enlarge the image.
Zoom ring
5 If your image looks likeor, you’ve placed the projector off to
one side of the screen at an angle. Place it directly in front of the center
of the screen, facing the screen squarely. Or press the or buttons on
the projector to correct it.
6 If your image looks likeor, press theorbuttons on the
projector to correct it.
Using the remote control
Make sure the batteries are installed as shown (two AA batteries).
Choose which source
to display
Turn projector
on and off
Access projector
menus
Turn off projector
display and sound
Control projector volume
Navigate projector menus
For more information on using the remote control, see the User’s Guide on your
projector CD.
Project over a wired
network
Follow the steps here to configure your projector for your wired network
using the projector’s menu system.
1 Plug in and turn on the projector.
2 Press the Menu button on the remote control, select the Network
menu, and press Enter.
3 Select Network Configuration and press Enter.
4 Select the Basic menu and press Enter.
5 Select the Projector Name setting and enter a name (up to 16
characters long) to identify your projector over the network.
Use the displayed keyboard to enter characters. Press the arrow buttons
on the remote control to highlight the characters and press Enter to
select them.
Note: See the User’s Guide on the projector CD for information on
adding passwords.
6 Select the Wired LAN menu and press Enter.
7 Choose IP Settings and press Enter.
8 If your network assigns addresses automatically, select IP Settings and
turn on the DHCP setting. If not, turn off the DHCP setting and enter
the projector’s IP Address, Subnet Mask, and Gateway Address,
as needed.
9 To prevent the IP address from appearing on the network standby
screen, set the IP Address Display setting to Off.
PowerLite® D6150/D6155W/D6250
*412046400**412046400*
Install network software
Install the EasyMP® Network Projection software on each computer that will
project over the network. Use the CD labeled Epson Projector Software to
install the program.
For instructions on installing and using your network software, see the EasyMP
Network Projection Operation Guide on your projector CD. This guide is
installed along with your projector User’s Guide.
To monitor and control your projector over the network, download and install
the EasyMP Monitor software and manual from the Epson support web site.
You can install links to the download pages from your projector CD, or go to
www.epson.com/support (U.S.) or www.epson.ca/support (Canada) and
select your projector.
Troubleshooting
If you see a blank screen or the No signal message after turning on your
computer or video device, check the following:
• Make sure the power light on the projector is green and not flashing.
• Press the Source Search button on the projector or the remote control to
select the computer as the image source.
• If you’re using a Windows notebook, press the function key on your
keyboard that lets you display on an external monitor. It may be labeled
CRT/LCD or have an icon such as. You may have to hold down the
Fn key while pressing it (such as Fn + F7). Wait a moment for the display
to appear.
• On a Macintosh®, select the Mirror Displays setting in the System
Preferences Displays utility.
Where to get help
Manuals
For more information about using the projector, install the manuals from your
projector CD. View the guides by clicking the icons for them on your computer
desktop.
Telephone Support Services
To use the Epson PrivateLine® Support service, call (800) 637-7661 and enter the
PIN on the Epson PrivateLine Support card included with your projector. This
service is available 6 am to 6 pm, Pacific Time, Monday through Friday, for the
duration of your warranty period. You may also speak with a projector support
specialist by dialing:
US: (562) 276-4394, 6 am to 8 pm, Pacific Time, Monday through Friday, and 7 am
to 4 pm, Pacific Time, Saturday
Canada: (905) 709-3839, 6 am to 8 pm, Pacific Time, Monday through Friday
Days and hours of support are subject to change without notice. Toll or long
distance charges may apply.
Internet Support
Visit www.epson.com/support (U.S.) or www.epson.ca/support
(Canada) for solutions to common problems. You can download utilities and
documentation, get FAQs and troubleshooting advice, or e-mail Epson.
Registration
Register today to get product updates, special promotions, and customer-only
offers. You can use the CD included with your projector or register online at
www.epson.com/webreg.
10 When you are finished, select Complete and press Enter, then press
Enter again to save your settings.
11 Press the Menu button to exit the menu system.
12 See “Install network software” for additional instructions
Project wirelessly
Follow the steps here to connect the projector wirelessly over an 802.11b,
802.11g, or 802.11n wireless network. You must install the optional Epson
wireless LAN module (part number V12H418P12). Your computer must have
a wireless card or built-in wireless interface, and be running Windows® 7,
Windows Vista®, Windows XP Professional x64, Windows XP, or Windows 2000,
or Mac OS® X 10.3 to 10.6.
1 Turn off the projector and unplug the power cord.
2 Remove the screw securing the wireless LAN module stopper, then
remove the stopper.
3 Insert the wireless LAN module into the port.
4 Replace the wireless LAN module stopper as shown below and secure it
using the screw you removed.
5 Plug in and turn on the projector.
6 To configure your projector for your wireless network, do one of
the following:
• If you’re using the optional Quick Wireless Connection USB key
(Windows only), insert it into the projector’s USB TypeA port, wait
for the displayed message, remove the key, and connect it to a USB
port on your computer. Follow the on-screen instructions to install
the driver, then run your presentation. For details, see the User’s
Guide on your projector CD.
• If you’re not using the key, continue with these steps.
7 Press the Menu button on the remote control, select the Network
menu, and press Enter.
Epson and EasyMP are registered trademarks, and Epson Exceed Your Vision is a registered logomark of Seiko Epson Corporation. PowerLite and PrivateLine are registered trademarks o\
f Epson America, Inc.
General Notice: Other product names used herein are for identification p\
urposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those \
marks.
This information is subject to change without notice.
© 2011 Epson America, Inc. 1/11 Printed in XXXXXX CPD-33690
8 Choose Network Configuration and press Enter.
9 Select the Basic menu and press Enter.
10 Select the Projector Name setting and enter a name (up to 16 characters
long) to identify your projector over the network.
Use the displayed keyboard to enter characters. Press the arrow buttons
on the remote control to highlight the characters and press Enter to
select them.
Note: See the User’s Guide on the projector CD for information on
adding passwords.
11 Select the Wireless LAN menu and press Enter.
12 Select the Connection Mode setting and choose one of these options:
• Quick to connect the projector to one computer on the network
• Advanced to connect the projector to multiple computers on
the network
13 If you selected Quick connection mode, select the Channel setting for
your wireless network and turn on the SSID Auto Setting setting.
14 Select the type of wireless network you are using as the Wireless LAN
Sys. setting.
15 If you selected Advanced connection mode, enter your network SSID (up
to 32 characters) as the SSID setting.
16 If your network assigns addresses automatically, select IP Settings and
turn on the DHCP setting. If not, turn off the DHCP setting and enter
the projector’s IP Address, Subnet Mask, and Gateway Address,
as needed.
17 To prevent the SSID and IP address from appearing on the network
standby screen, set the SSID Display and/or IP Address Display settings
to Off.
18 When you are finished, select Complete and press Enter, then press
Enter again to save your settings.
19 Press the Menu button to exit the menu system.
20 See “Install network software” for additional instructions.
.
Optional accessories
For a list of optional accessories, see the User’s Guide on your projector CD.
You can purchase screens or other accessories from an Epson authorized
reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766).
Or you can purchase online at www.epsonstore.com (U.S. sales)
or www.epson.ca (Canadian sales).
Install network software
Install the EasyMP® Network Projection software on each computer that will
project over the network. Use the CD labeled Epson Projector Software to
install the program.
For instructions on installing and using your network software, see the EasyMP
Network Projection Operation Guide on your projector CD. This guide is
installed along with your projector User’s Guide.
To monitor and control your projector over the network, download and install
the EasyMP Monitor software and manual from the Epson support web site.
You can install links to the download pages from your projector CD, or go to
www.epson.com/support (U.S.) or www.epson.ca/support (Canada) and
select your projector.
Troubleshooting
If you see a blank screen or the No signal message after turning on your
computer or video device, check the following:
• Make sure the power light on the projector is green and not flashing.
• Press the Source Search button on the projector or the remote control to
select the computer as the image source.
• If you’re using a Windows notebook, press the function key on your
keyboard that lets you display on an external monitor. It may be labeled
CRT/LCD or have an icon such as. You may have to hold down the
Fn key while pressing it (such as Fn + F7). Wait a moment for the display
to appear.
• On a Macintosh®, select the Mirror Displays setting in the System
Preferences Displays utility.
Where to get help
Manuals
For more information about using the projector, install the manuals from your
projector CD. View the guides by clicking the icons for them on your computer
desktop.
Telephone Support Services
To use the Epson PrivateLine® Support service, call (800) 637-7661 and enter the
PIN on the Epson PrivateLine Support card included with your projector. This
service is available 6 am to 6 pm, Pacific Time, Monday through Friday, for the
duration of your warranty period. You may also speak with a projector support
specialist by dialing:
US: (562) 276-4394, 6 am to 8 pm, Pacific Time, Monday through Friday, and 7 am
to 4 pm, Pacific Time, Saturday
Canada: (905) 709-3839, 6 am to 8 pm, Pacific Time, Monday through Friday
Days and hours of support are subject to change without notice. Toll or long
distance charges may apply.
Internet Support
Visit www.epson.com/support (U.S.) or www.epson.ca/support
(Canada) for solutions to common problems. You can download utilities and
documentation, get FAQs and troubleshooting advice, or e-mail Epson.
Registration
Register today to get product updates, special promotions, and customer-only
offers. You can use the CD included with your projector or register online at
www.epson.com/webreg.
10 When you are finished, select Complete and press Enter, then press
Enter again to save your settings.
11 Press the Menu button to exit the menu system.
12 See “Install network software” for additional instructions
Project wirelessly
Follow the steps here to connect the projector wirelessly over an 802.11b,
802.11g, or 802.11n wireless network. You must install the optional Epson
wireless LAN module (part number V12H418P12). Your computer must have
a wireless card or built-in wireless interface, and be running Windows® 7,
Windows Vista®, Windows XP Professional x64, Windows XP, or Windows 2000,
or Mac OS® X 10.3 to 10.6.
1 Turn off the projector and unplug the power cord.
2 Remove the screw securing the wireless LAN module stopper, then
remove the stopper.
3 Insert the wireless LAN module into the port.
4 Replace the wireless LAN module stopper as shown below and secure it
using the screw you removed.
5 Plug in and turn on the projector.
6 To configure your projector for your wireless network, do one of
the following:
• If you’re using the optional Quick Wireless Connection USB key
(Windows only), insert it into the projector’s USB TypeA port, wait
for the displayed message, remove the key, and connect it to a USB
port on your computer. Follow the on-screen instructions to install
the driver, then run your presentation. For details, see the User’s
Guide on your projector CD.
• If you’re not using the key, continue with these steps.
7 Press the Menu button on the remote control, select the Network
menu, and press Enter.
Epson and EasyMP are registered trademarks, and Epson Exceed Your Vision is a registered logomark of Seiko Epson Corporation. PowerLite and PrivateLine are registered trademarks o\
f Epson America, Inc.
General Notice: Other product names used herein are for identification p\
urposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those \
marks.
This information is subject to change without notice.
© 2011 Epson America, Inc. 1/11 Printed in XXXXXX CPD-33690
8 Choose Network Configuration and press Enter.
9 Select the Basic menu and press Enter.
10 Select the Projector Name setting and enter a name (up to 16 characters
long) to identify your projector over the network.
Use the displayed keyboard to enter characters. Press the arrow buttons
on the remote control to highlight the characters and press Enter to
select them.
Note: See the User’s Guide on the projector CD for information on
adding passwords.
11 Select the Wireless LAN menu and press Enter.
12 Select the Connection Mode setting and choose one of these options:
• Quick to connect the projector to one computer on the network
• Advanced to connect the projector to multiple computers on
the network
13 If you selected Quick connection mode, select the Channel setting for
your wireless network and turn on the SSID Auto Setting setting.
14 Select the type of wireless network you are using as the Wireless LAN
Sys. setting.
15 If you selected Advanced connection mode, enter your network SSID (up
to 32 characters) as the SSID setting.
16 If your network assigns addresses automatically, select IP Settings and
turn on the DHCP setting. If not, turn off the DHCP setting and enter
the projector’s IP Address, Subnet Mask, and Gateway Address,
as needed.
17 To prevent the SSID and IP address from appearing on the network
standby screen, set the SSID Display and/or IP Address Display settings
to Off.
18 When you are finished, select Complete and press Enter, then press
Enter again to save your settings.
19 Press the Menu button to exit the menu system.
20 See “Install network software” for additional instructions.
.
Optional accessories
For a list of optional accessories, see the User’s Guide on your projector CD.
You can purchase screens or other accessories from an Epson authorized
reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766).
Or you can purchase online at www.epsonstore.com (U.S. sales)
or www.epson.ca (Canadian sales).