Epson Powerlite D6150 Multimedia Projector Users Guide

2.
Place thecable cover onthe projector asshown, guiding thecables through thenotch onthe base of
 the
cable cover.
 3.
Tighten bothcable cover screws.
 To
remove thecover, loosen bothscrews andtake thecover offofthe projector.
 Parent
topic:Setting Upthe Projector
 41   

Installing
Batteriesinthe Remote Control
 The
remote controlusesthetwo AAbatteries thatcame withtheprojector.
 1.
Open thebattery coverasshown.
 2.
Insert thebatteries withthe+and –ends facing asshown.
 42   

3.
Close thebattery coverandpress itdown untilitclicks intoplace.
 Parent
topic:Setting Upthe Projector
 43  

Using
theProjector onaNetwork
 Follow
theinstructions inthese sections toset upyour projector foruse onanetwork.
 Wired
Network Projection
 Wireless
NetworkProjection
 Setting
UpProjector NetworkE-MailAlerts
 Setting
UpMonitoring UsingSNMP
 Controlling
aNetworked ProjectorUsingaWeb Browser
 Crestron
RoomView Support
 Wired
Network Projection
 You
cansend images toyour projector throughawired network. Todothis, youconnect theprojector to
 your
network, andthen setupyour projector andcomputer fornetwork...

2.
Connect theother endofthe cable tothe projectors LANport.
 1
 LAN
port
 Parent
topic:WiredNetwork Projection
 Selecting
WiredNetwork Settings
 Before
youcanproject frommultiple computers onyour network, youmust select thenetwork settings
 for
the projector usingitsmenu system.
 Note:
Makesureyoualready connected theprojector toyour wired network usingtheLAN port.
 1.
Turn onthe projector.
 2.
Press theMenu button onthe remote control.
 3.
Select theNetwork menuandpress Enter.
 45  

4.
Select Network Configuration andpress Enter.
 5.
Select theBasic menuandpress Enter.
 6.
Select thefollowing basicoptions asnecessary:
 •
Projector Nameletsyou enter aname upto16 alphanumeric characterslongtoidentify the
 projector
overthenetwork.
 •
PJLink Password letsyou enter apassword upto32 alphanumeric characterslongforusing the
 PJLink
protocol forprojector control.
 •
Web Control Password letsyou enter apassword upto8alphanumeric characterslongfor
 accessing
theprojector overtheweb.
 •...

7.
Select theWired LANmenu andpress Enter.
 8.
Ifnecessary, selectIPSettings andpress Enter.
 9.
Select yourIPSettings asnecessary:
 •
Ifyour network assignsaddresses automatically, turnonthe DHCP setting.
 •
Ifyou must setaddresses manually,turnoffDHCP andenter theprojectors IPAddress ,Subnet
 Mask
,and Gateway Addressasneeded.
 Note:
Tohighlight thenumbers youwant fromthedisplayed keyboard, pressthearrow buttons on
 the
remote control. Toselect ahighlighted number,pressEnter.
 10.
Toprevent...

There
aretwo ways toconnect theprojector toyour wireless network:
 •
Using theoptional EpsonQuickWireless Connection USBkey(Windows only)
 •
Configuring theconnection manuallyusingtheprojectors Networkmenus
 After
installing themodule andsetting upthe projector, installthenetwork software fromtheEpson
 Projector
SoftwareCDonyour computer. Usethefollowing softwareanddocumentation toset up,
 control,
andmonitor wireless projection:
 •
EasyMP Network Projection softwaresetsupyour computer forwireless...

2.
Remove thescrew securing thewireless LANmodule stopper, thenremove thestopper.
 3.
Insert thewireless LANmodule intotheport.
 49   

4.
Replace thewireless LANmodule stopper andsecure itusing thescrew youremoved.
 5.
Plug inand turn onthe projector.
 Parent
topic:Wireless NetworkProjection
 Related
references
 Optional
Equipment andReplacement Parts
 Using
Quick Wireless Connection (WindowsOnly)
 You
canusetheoptional EpsonQuickWireless Connection USBkeytoquickly connect theprojector to
 a
Windows computer wirelessly. Thenyoucanproject yourpresentation andremove thekey when you
 are
done.
 1.
Turn onthe projector.
 2.
Remove theUSB...