Epson Powerlite Cinema 550 Home Theater Projector Users Guide
Have a look at the manual Epson Powerlite Cinema 550 Home Theater Projector Users Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Problem Solving61 Where To Get Help Epson provides technical assistance 24 hours a day at http://support.epson.com. Here you can access troubleshooting information, download product documentation, and receive technical advice through e-mail. To use the Epson PrivateLine Support service, call (800) 637-7661 and enter the PIN on the Epson PrivateLine Support card that came with your projector. This is the fastest way of speaking to a live representative, and it’s free. This service is available 6 AM to 6PM, Pacific Time, Monday through Friday, for the duration of your warranty period. You may also speak with a projector support specialist by dialing one of these numbers: ■U.S.: (562) 276-4394, 6AM to 6PM, Pacific Time, Monday through Friday ■Canada: (905) 709-3839, 6AM to 6PM, Pacific Time, Monday through Friday Toll or long distance charges may apply. Before you call, please have the following information ready: ■Product name (Epson PowerLite Cinema 550) ■Product serial number (located on the bottom of the projector) ■Computer configuration, if you’re connected to a computer ■Description of the problem You can purchase screens, carrying cases, or other accessories from an authorized Epson reseller. To find the nearest reseller, please call 800-GO-EPSON (800-463-7766). To purchase online, visit www.epsonstore.com (U.S. sales only). In Canada, please call (800) 463-7766 for reseller referral.
Specifications63 Specifications General Type of display Poly-silicon TFT active matrix Size of LCD panels 0.7 inch (18 mm) wide Lens F=2.1 to 2.8, f=21.4 to 31.7 mm Resolution (native format) 1280 × 720 pixels, 720p Brightness 1400 ANSI lumens maximum Dynamic contrast ratio 3000:1 Image size 30 to 300 inches Projection distance 2.9 to 44.8 feet (0.88 to 13.65 m) at 16:9 3.5 to 54.8 feet (1.07 to 16.71 m) at 4:3 Zoom ratio 1:1.5 Aspect ratio 16:9 or 4:3 Noise level 32 dB (Dynamic color mode) 26 dB (Theatre Black color mode) Keystone correction Vertical: –15 to +15° Lamp Type UHE (Ultra High Efficiency), E-TORL Power consumption 170 W Lamp life 1700 to 3000 hours, depending on usage Part number V13H010L35 Remote Control Range Approximate 30 feet (10 m) Batteries AA × 2
64Specifications Dimensions Height 4.9 inches (124 mm); not including adjustable feet Width 16 inches (406 mm) Depth 12.2 inches (309 mm) Weight 11.5 lb. (5.2 kg) Electrical Rated frequency 50/60 Hz AC Power supply 100 to 120 VAC, 2.7 A 200 to 240 VAC, 1.2 A Power consumption Operating: 245 W (100 to 120V), 240 W (200 to 240 V) Standby: 4 W (100 to 120V), 5 W (200 to 240 V) Environmental Temperature Operating: 41 to 95 °F (5 to 35 °C) Storage: 14 to 140 °F (–10 to 60 °C) Humidity Operating: 20 to 80% RH, non-condensing Storage: 10 to 90% RH, non-condensing Operating altitude 7500 feet (2280 meters) Safety United States FCC Part 15B Class B (DoC) UL60950 Third Edition Canada ICES-003 Class B CSA C22.2 No. 60950 Pixelworks ™ ICs are used in this projector.
Specifications65 Compatible Video Formats The projector supports analog video in NTSC, PAL, and SECAM formats, and it automatically adjusts to the incoming signal. It can receive these formats as composite video, S-video, or component video—which it accepts through the Video, S-Video, and Input A ports, respectively. The projector also supports digital video (SDTV, HDTV) and various monitor display formats. Digital video is accepted by the HDMI port and the Input A port (in component video format). The Input B port accepts analog RGB computer monitor signals. If necessary, you can select a different Aspect setting to optimize the image. The resolution at which the image displays for a given setting depends on the currently active picture source, as listed in the following tables. Composite video or S-Video Component video Note: The signal name refers to the total number of visible scan lines and the display mode (interlaced or progressive), as defined by the signal format. FormatAspect setting Normal (4:3)Zoom (16:9)Squeeze/ Wide (16:9)Through (4:3)Squeeze Through (16:9) NTSC 960 × 720 1280 × 720 1280 × 720 596 × 446 794 × 446 PAL or SECAM 960 × 720 1280 × 720 1280 × 720 708 × 528 944 × 528 Format/ SignalAspect setting Normal Zoom Squeeze Wide ThroughSqueeze Through SDTV 480i 576i 480p 576p(4:3) 960 × 720 960 × 720 960 × 720 960 × 720(16:9) 1280 × 720 1280 × 720 1280 × 720 1280 × 720(16:9) 1280 × 720 1280 × 720 1280 × 720 1280 × 720(16:9) 1280 × 760 1280 × 760 1280 × 760 1280 × 760(4:3) 596 × 446 708 × 528 596 × 446 708 × 528(16:9) 794 × 446 944 × 528 794 × 446 944 × 528 HDTV 720p 1080i(16:9) 1280 × 720 1280 × 720— —— —— —(16:9) 1176 × 664 —— —
66Specifications Analog RGB * HDMI input signalsSignal (4:3)Aspect setting Normal Zoom Wide Squeeze ThroughSqueeze Through VGA* 960 × 720 1280 × 720 1280 × 720 1280 × 720 640 × 480 853 × 480 VESA 960 × 720 1280 × 720 1280 × 720 1280 × 720 640 × 480 853 × 480 SVGA 960 × 720 1280 × 720 1280 × 720 1280 × 720 800 × 600 1066 × 600 XGA 960 × 720 1280 × 720 1280 × 720 1280 × 720 — — SXGA 960 × 720 1280 × 720 1280 × 720 1280 × 720 — — WXGA 1280 × 720 1280 × 720 — 1280 × 720 — — MAC13” MAC16” MAC19”960 × 720 960 × 720 960 × 7201280 × 720 1280 × 720 1280 × 7201280 × 720 1280 × 720 1280 × 7201280 × 720 1280 × 720 1280 × 720640 × 480 832 × 624 —853 × 480 1109 × 624 — SDTV* 480i 480p 576i 576p960 × 720 960 × 720 960 × 720 960 × 7201280 × 720 1280 × 720 1280 × 720 1280 × 7201280 × 720 1280 × 720 1280 × 720 1280 × 7201280 × 720 1280 × 720 1280 × 720 1280 × 720640 × 480 640 × 480 768 × 576 768 × 576853 × 480 853 × 480 1024 × 576 1024 × 576 HDTV* 720p 1080i1280 × 720 1280 × 720— —— —— —1280 × 720 —— —
Specifications67 ESC/VP21 Command Codes You can use an AV controller with a 9-pin null modem serial cable to control the projector. You can download the complete ESC/VP 21 Communication Manual for home theater projectors from the Epson website at http://support.epson.com. Following are some of the available codes: Item Command Power ON/OFF ON PWR ON OFF PWR OFF A/V Mute ON/OFF ON MUTE ON OFF MUTE OFF A/V Mute selection Black MSEL 00 Blue MSEL 01 User’s Logo MSEL 02 Source changeTerminal Signal name Input A 4RCA SOURCE 10 YCbCr SOURCE 14 YPbPr SOURCE 15 Auto SOURCE 1F Input B HDB15 SOURCE 20 RGB SOURCE 21 Input 3 (HDMI) HDMI SOURCE 30 Digital-RGB SOURCE 31 RGB-Video SOURCE 33 YCbCr SOURCE 34 YPbPr SOURCE 35 Video Cyclic within SOURCE 4X SOURCE 40 Video (RCA) SOURCE 41 S-Video SOURCE 42 Input 5 D4 SOURCE C0 YCbCr SOURCE C4 YPbPr SOURCE C5 Auto SOURCE CF
68Specifications Color Mode sRGB CMODE 01 Theatre CMODE 05 Living Room CMODE 06 Natural CMODE 07 Dynamic CMODE 08 Theatre Black 1 CMODE 09 Theatre Black 2 CMODE 0A Aspect ratio Auto ASPECT 00 Normal ASPECT 20 Squeeze ASPECT 21 Zoom ASPECT 22 Through ASPECT 23 Squeeze Through ASPECT 24 Wide ASPECT 25 Item Command
Notices69 Notices Important Safety Information Follow these safety instructions when setting up and using the projector: ■Never look into the projector lens when the lamp is turned on; the bright light can damage your eyes. Never let children look into the lens when it is on. ■Never open any cover on the projector, except the lamp and filter covers. Dangerous electrical voltages inside the projector can severely injure you. ■Except as specifically explained in this User’s Guide, do not attempt to service this product yourself. Refer all servicing to qualified service personnel. ■The projector and its accessories come packaged in plastic bags. Keep plastic bags away from small children to avoid any risk of suffocation. ■Don’t place the projector on an unstable cart, stand, or table. Also, don’t use the projector near water or sources of heat. ■Use the type of power source indicated on the projector. If you’re not sure of the power available, consult your dealer or power company. ■Place the projector near a wall outlet where the plug can be easily unplugged. ■Don’t insert the plug into an outlet with dust present, and insert the plug firmly into the outlet. Failure to do so could result in sparks or fire. ■Don’t overload wall outlets, extension cords, or integral convenience receptacles. This can cause fire or electric shock. ■Don’t block the slots and openings in the projector case. They provide ventilation and prevent the projector from overheating. Don’t operate the projector on a sofa, rug, or other soft surface, or in a closed-in cabinet unless proper ventilation is provided. ■Never push objects through the cabinet slots or spill liquid into the projector. ■Unplug the projector from the wall outlet and refer servicing to qualified service personnel under the following conditions: when the power cord or plug is damaged or frayed; if liquid has been spilled into the projector, or if it has been exposed to rain or water; if it doesn’t operate normally when you follow the operating instructions, or if it exhibits a distinct change in performance, indicating a need for service; if it has been dropped or the housing has been damaged.
70Notices ■Don’t place the projector where the cord can be walked on. This may result in fraying or damage to the plug. ■Unplug the projector from the wall outlet before cleaning. Use a damp cloth for cleaning. Do not use liquid or aerosol cleaners. ■ The lamp(s) in this product contain mercury. Please consult your state and local regulations regarding disposal or recycling. Do not put in the trash. ■Allow the lamp to cool for one hour before replacing it. ■Unplug the projector during lightning storms or when not in use for extended periods. ■Don’t place the projector or remote control on top of heat-producing equipment. ■If you use the projector in a country other than where you purchased it, use the correct power cord for that country. ■Don’t stand on the projector or place heavy objects on it. ■Don’t use the projector outside of the required temperature range of 41 to 95 °F (5 to 35 °C). Doing so may cause an unstable display and could lead to projector damage. ■Don’t store the projector outside of the required temperature range of 14 to 140 °F (–10 to 60 °C) or in direct sunlight for long periods of time. Doing so may cause damage to the case. WARNING: The cords included with this product contain chemicals, including lead, known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling. (posted in accordance with Proposition 65 in Cal. Health & Safety Code § 2549.5 et seq) Remote Control Information You can operate the projector by remote control via a line-of-sight infrared (IR) receiver at the front and rear of the projector. The projector may not respond to remote control commands under the following conditions: ■There is an object between the remote control and the IR receiver on the projector. ■Ambient light is too bright. ■Certain types of fluorescent lighting are used. ■Other equipment that emits infrared energy, such as a radiant room heater, is in the room.