Epson Powerlite Cinema 200 Technical Specifications

Epson PowerLite Cinema 200 Projector
1/04 Epson PowerLite Cinema 200 Projector - 1
Projector PartsProjector Specifications
General
Type of display Poly-silicon Thin Film Transistor (TFT)
active matrix with Micro Lens Array
Size of LCD panels 0.7 inches (18 mm) wide
Lens F=2.1 to 2.8 mm, f=21.4 to 31.7 mm
Zoom ratio 1:1.5
Resolution 1280 × 720 pixels (720p) 
Color
reproduction 24 bit, 16.8 million colors
Brightness 1300 ANSI lumens max. (Dynamic or
Living Room color mode)
Contrast ratio 1000 :1
Image size...

Epson PowerLite Cinema 200 Projector
2 - Epson PowerLite Cinema 200 Projector 1/04
Electrical
Rated frequency 50/60 Hz
Power supply 100 to 120 V: 3.0 A
200 to 240 V: 1.4 A
Power consumption Operating: 270 W max.
Standby: 0.3 W
Environmental
Temperature Operating: 41 to 95° F (5 to 35° C) 
(non-condensing) Storage: 14 to 140° F (–10 to 60° C)
Humidity Operating: 20 to 80% RH, 
non-condensing
Storage: 10 to 90% RH, non-condensing
Safety
United States FCC Part 15B Class B
UL1950 Rev. 3
Canada ICES-003 Class...

Epson PowerLite Cinema 200 Projector
1/04 Epson PowerLite Cinema 200 Projector - 3 When you select an Aspect setting, the resolution at which the 
image displays depends on the currently active picture source, as 
listed below.
Analog TV
FormatAspect setting
Normal Zoom Squeeze ThroughSqueeze 
Through
NTSC 960 × 720 1280 × 720 1280 × 720 596 × 446 794 × 446
PAL or SECAM 960 
× 720 960 × 720 960 × 720 708 × 528 944 × 528
Digital video formats received as component video
FormatSignal 
nameAspect setting...

Epson PowerLite Cinema 200 Projector
4 - Epson PowerLite Cinema 200 Projector 1/04
Positioning the Projector
You can install the projector for these viewing setups:
When projecting from a rear or overhead position, orient the 
image by selecting the correct Projection option (see page 5). 
Image Size and Projection Distance 
The maximum size of the image is determined by the distance 
from the projector’s lens to the screen. Depending on how you 
use the Zoom and other settings, the actual size may be...

Epson PowerLite Cinema 200 Projector
1/04 Epson PowerLite Cinema 200 Projector - 5
Locking the Projector
You can lock the projector to prevent the image from being 
accidentally changed once it’s adjusted, and to keep children 
from using the projector without adult supervision.
1. Press the 
Menu button on the remote control.
2. Use the menu navigation buttons to open the 
Setting menu, 
then open the 
Operation menu and select Lock Setting.
3. Choose from these options:
❏
Focus Lock to prevent the...

Epson PowerLite Cinema 200 Projector
6 - Epson PowerLite Cinema 200 Projector 1/04
Performing Keystone Correction
If the projected image looks like  or  , use the Keystone 
function to correct its shape. 
Note: If the image is shaped like  or  , the projector has been 
placed off to the side of the screen and angled toward it. Face the 
projector straight ahead (instead of at the center of the screen), then 
use the horizontal lens shift knob to center the image.
To perform keystone correction:
1. Press...

Epson PowerLite Cinema 200 Projector
1/04 Epson PowerLite Cinema 200 Projector - 7
Troubleshooting
You cannot turn on the projector.
❏Make sure the power cord is connected, then wait a moment 
for the P power light to turn orange before pressing the 
P
Power button.
❏If you’ve set the 
Key Lock (see page 5), the control panel 
buttons are disabled; you must use the remote control to 
turn on the projector.
❏If you’ve set the 
Child Lock, use the remote control or press 
and hold the P 
Power button on...

Epson PowerLite Cinema 200 Projector
8 - Epson PowerLite Cinema 200 Projector 1/04If the 
Arrange option isn’t available, you may need to select 
one of the Simulscan resolutions. Click the 
Monitor icon 
and then select a Simulscan resolution from the 
Resolution 
box. (Allow a few seconds for the projector to sync up.)
The picture is upside-down or reversed.
Change the Projection setting in the menu system (see page 5).
Only part of the picture is displayed, or 
the picture is distorted.
❏Press the...

Epson PowerLite Cinema 200 Projector
1/04 Epson PowerLite Cinema 200 Projector - 9
Using Cinema Color Editor
Cinema Color Editor is a program that lets you use your 
computer to operate the projector in place of the remote 
control, and to make fine custom color adjustments.
Note: See the User’s Guide for instructions on installing Cinema 
Color Editor and connecting the projector to your computer.
Remote Control Operations
You can use Cinema Color Editor to change the image source, 
adjust the aspect...

Epson PowerLite Cinema 200 Projector
10 - Epson PowerLite Cinema 200 Projector 1/04
Adjusting the Color
You can use the Color Adjustment settings to fine-tune the 
color of the image.
1. Select 
Picture Quality, then click Adjustment of image.
2. Select one of the following modes, then click 
Adjust.
❏
RGB: Adjusts the offset, gamma, and gain for each signal 
color. Use 
Offset to adjust darker shades, Gamma for 
intermediate shades, and 
Gain for the lightest shades.
❏
RGBCMY: Adjusts the hue and...