Epson Powerlite 9000i Multimedia Projector Users Guide

Controlling Projector Features
131
Creating Cursors/Stamps
You can create or edit a cursor or stamp from the Cursor/Stamp 
Setting window.
1. Choose the Cursor/Stamp Setting option from the Select 
Screen dropdown menu. The Cursor/Stamp Setting window 
appears.
80009000.book  Page 131  Monday, November 1, 1999  9:35 AM 

4  •  Using ELP Link IV
            132
2. Click the Edit button. The Cursor/Stamp edit window appears.
3. Create a new cursor/stamp using the pencil, line, square, ellipse, 
and color tools.
4. Click Renewal to insert the cursor/stamp into the next available 
spot in the Cursor/Stamp list.
5. Choose the Close command from the File menu to close the Edit 
window and redisplay the Cursor/Stamp Setting window.
6. Choose the Save or Save As command from the File menu to 
save your cursor/stamps. 
7. To...

Exiting the Software
133
Creating a New File
To create a new set of cursors/stamps, choose the New command 
from the File menu. A blank Cursor/Stamp Setting window displays 
allowing you to create a new set of cursors/stamps.
Opening a File
To open a cursor/stamp file:
1. Choose the Open command from the File menu. A standard 
Windows Open dialog box appears.
2. Select the .csp file and click Open.
3. To edit a cursor/stamp, click on it and then click Edit.
Exiting the Software
To exit and close the ELP...

4  •  Using ELP Link IV
            134
80009000.book  Page 134  Monday, November 1, 1999  9:35 AM 

135
5Maintenance
Y
our projector needs little maintenance. You should keep the lens 
clean because any dirt or smears appear on the screen. You also need to 
periodically clean the air filter at the bottom of the projector. A 
clogged air filter can block ventilation needed to cool the projector and 
keep it from overheating. 
The only parts you should replace are the lamp and air filter. If any 
other part needs replacing, contact your dealer or a qualified service 
person.
80009000.book  Page 135...

5  •  Maintenance
            136
Warning: Before you clean any part of the projector, turn off the projector 
and unplug the power cord. Never open any cover on the projector, except 
the lamp and filter covers. Dangerous electrical voltages in the projector 
can injure you severely. Do not try to service this product yourself, except as 
specifically explained in this User’s Guide. Refer all other servicing to 
qualified service personnel.
Cleaning the Lens 
Clean the lens whenever you notice dirt or...

Cleaning the Air Filter
137
Cleaning the Air Filter 
Clean the air filter at the bottom of the projector after every 100 hours 
of use. If it is not cleaned periodically, it can become clogged with 
dust, preventing proper ventilation. This can cause overheating and 
damage the projector. To clean the air filter, follow these steps:
1. Turn off the projector and unplug the power cable.
2. Turn the projector on its side so that the handle is on top and you 
can access the filter easily.
Note: Standing the...

5  •  Maintenance
            138
4. The filter is attached to the inside of the filter cover. It is 
recommended that you use a small vacuum cleaner designed for 
computers and other office equipment to clean the filter. If you 
don’t have one, use a dry, lint-free cloth. 
If the dirt is difficult to remove or if the filter is torn, replace it. 
Contact your dealer or call EPSON Accessories at (800) 873-7766 
in the United States and Canada to obtain a new one. 
5. Replace the filter cover when you’re...

Replacing the Lamp
139
1. Turn off the projector and unplug the power cable.
2. Turn the projector over so you can access the lamp cover.
3. Use a screwdriver to loosen the two retaining screws on the lamp 
cover. When the screws are loose, lift off the lamp cover. (You 
cannot remove these screws from the cover.
)
80009000.book  Page 139  Monday, November 1, 1999  9:35 AM 

5  •  Maintenance
            140
4. Use a screwdriver to loosen the three screws holding the lamp unit 
in place. (You cannot remove these screws.) 
5. Lift up the handle and pull out the lamp unit.
6. Gently insert the new lamp unit by lowering it into position. 
Make sure it’s inserted securely. Tighten the screws on the new 
lamp unit.
7. Replace the lamp cover and tighten the cover screws. (Make sure 
the lamp cover is securely fastened. The projector turns itself off 
if the lamp cover is open.)...