Epson Powerlite 85 Quick Setup Manual
Have a look at the manual Epson Powerlite 85 Quick Setup Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Quick Setup Before using the projector, make sure you read the safety instructions in the User’s Guide on your projector CD. Connect the projector Choose from the following connections: Computer Monitor Port Connect a computer using the VGA cable that came with the projector. Connect one end to the projector’s Computer1 or Computer2 port, and the other end to your computer’smonitor port. If you are using a notebook, switch it to external display. You can also connect an audio cable or microphone. Computer USB Port Connect a computer (Windows® 2000 or later only) using the USB cable that came with the projector. Connect the square end of the USB cable to the projector’sType B (square) USB port. Connect the flat end of the cable to any USB port on your computer. You can also connect an audio cable or microphone. Follow the on-screen instructions to install the Epson USB Display software. Then press the USB button on the remote control. Network (LAN) Connect the projector to your network using an Ethernet® cable. See “Project Over the Network” on the back of this sheet for more information. Microphone Connect a dynamic microphone to the Mic port, using a 3.5 mm mini-jack cable. Video Player Connect up to 4 video devices and use the remote control to switch between them. RCA video cable (composite video)(optional) S-Video cable(optional) Component video to VGA cable(optional)Audio cable (optional) Camera or USB Device Connect a digital camera, document camera, or other USB device to the projector’sType A (flat) USB port. If you connect a digital camera or USB storage device, you can use the projector’s Slideshow feature. See the EasyMP Operation Guide on your projector CD. For information on playing sound through the projector or connecting an external monitor, see the User’s Guide on your projector CD. Turn on your equipment 1 Turn on your computer or video source. 2 Plug in the projector. 3 Open the A/V Mute slide all the way. 4 Press thepower button on the projector or remote control. Power light Power button Thepower light flashes green, then stays on. NOTE: To shut down the projector, press thepower button twice, then unplug it. You don’t have to wait for the projector to cool down. Adjust the image 1 If you don’t see an image, press the Source Search button on the projector or the Search button on the remote control to select the image source. NOTE: If you still see a blank screen or have other display problems, see the troubleshooting tips on the back of this sheet. 2 To raise the image, press the blue foot release button and lift the front of the projector. Release the button to lock the foot in position. 3 Turn the focus ring to sharpen the image. Turn the zoom ring to reduce or enlarge the image. Zoom Focus 4 If your image looks likeor, you’ve placed the projector off to one side of the screen at an angle. Place it directly in front of the center of the screen, facing the screen squarely. 5 If your image looks likeor, press theorbuttons on the projector to correct it. Using the remote control Make sure the batteries are installed as shown (two AA batteries). Change presentation slides (USB connection only) Navigate projector menus Choose which source to display Control projector volume Turn projector on and off Turn off projector display and sound You can use the remote control to operate the projector. With the USB cable, you can use the remote as a wireless mouse. For more information on using the remote control, see your User’s Guide. PowerLite® 85/825/826W *411676200**411676200* DC-06 document camera Digital camera Thumb drive
Quick Setup Before using the projector, make sure you read the safety instructions in the User’s Guide on your projector CD. Connect the projector Choose from the following connections: Computer Monitor Port Connect a computer using the VGA cable that came with the projector. Connect one end to the projector’s Computer1 or Computer2 port, and the other end to your computer’smonitor port. If you are using a notebook, switch it to external display. You can also connect an audio cable or microphone. Computer USB Port Connect a computer (Windows® 2000 or later only) using the USB cable that came with the projector. Connect the square end of the USB cable to the projector’sType B (square) USB port. Connect the flat end of the cable to any USB port on your computer. You can also connect an audio cable or microphone. Follow the on-screen instructions to install the Epson USB Display software. Then press the USB button on the remote control. Network (LAN) Connect the projector to your network using an Ethernet® cable. See “Project Over the Network” on the back of this sheet for more information. Microphone Connect a dynamic microphone to the Mic port, using a 3.5 mm mini-jack cable. Video Player Connect up to 4 video devices and use the remote control to switch between them. RCA video cable (composite video)(optional) S-Video cable(optional) Component video to VGA cable(optional)Audio cable (optional) Camera or USB Device Connect a digital camera, document camera, or other USB device to the projector’sType A (flat) USB port. If you connect a digital camera or USB storage device, you can use the projector’s Slideshow feature. See the EasyMP Operation Guide on your projector CD. For information on playing sound through the projector or connecting an external monitor, see the User’s Guide on your projector CD. Turn on your equipment 1 Turn on your computer or video source. 2 Plug in the projector. 3 Open the A/V Mute slide all the way. 4 Press thepower button on the projector or remote control. Power light Power button Thepower light flashes green, then stays on. NOTE: To shut down the projector, press thepower button twice, then unplug it. You don’t have to wait for the projector to cool down. Adjust the image 1 If you don’t see an image, press the Source Search button on the projector or the Search button on the remote control to select the image source. NOTE: If you still see a blank screen or have other display problems, see the troubleshooting tips on the back of this sheet. 2 To raise the image, press the blue foot release button and lift the front of the projector. Release the button to lock the foot in position. 3 Turn the focus ring to sharpen the image. Turn the zoom ring to reduce or enlarge the image. Zoom Focus 4 If your image looks likeor, you’ve placed the projector off to one side of the screen at an angle. Place it directly in front of the center of the screen, facing the screen squarely. 5 If your image looks likeor, press theorbuttons on the projector to correct it. Using the remote control Make sure the batteries are installed as shown (two AA batteries). Change presentation slides (USB connection only) Navigate projector menus Choose which source to display Control projector volume Turn projector on and off Turn off projector display and sound You can use the remote control to operate the projector. With the USB cable, you can use the remote as a wireless mouse. For more information on using the remote control, see your User’s Guide. PowerLite® 85/825/826W *411676200**411676200* DC-06 document camera Digital camera Thumb drive
Quick Setup Before using the projector, make sure you read the safety instructions in the User’s Guide on your projector CD. Connect the projector Choose from the following connections: Computer Monitor Port Connect a computer using the VGA cable that came with the projector. Connect one end to the projector’s Computer1 or Computer2 port, and the other end to your computer’smonitor port. If you are using a notebook, switch it to external display. You can also connect an audio cable or microphone. Computer USB Port Connect a computer (Windows® 2000 or later only) using the USB cable that came with the projector. Connect the square end of the USB cable to the projector’sType B (square) USB port. Connect the flat end of the cable to any USB port on your computer. You can also connect an audio cable or microphone. Follow the on-screen instructions to install the Epson USB Display software. Then press the USB button on the remote control. Network (LAN) Connect the projector to your network using an Ethernet® cable. See “Project Over the Network” on the back of this sheet for more information. Microphone Connect a dynamic microphone to the Mic port, using a 3.5 mm mini-jack cable. Video Player Connect up to 4 video devices and use the remote control to switch between them. RCA video cable (composite video)(optional) S-Video cable(optional) Component video to VGA cable(optional)Audio cable (optional) Camera or USB Device Connect a digital camera, document camera, or other USB device to the projector’sType A (flat) USB port. If you connect a digital camera or USB storage device, you can use the projector’s Slideshow feature. See the EasyMP Operation Guide on your projector CD. For information on playing sound through the projector or connecting an external monitor, see the User’s Guide on your projector CD. Turn on your equipment 1 Turn on your computer or video source. 2 Plug in the projector. 3 Open the A/V Mute slide all the way. 4 Press thepower button on the projector or remote control. Power light Power button Thepower light flashes green, then stays on. NOTE: To shut down the projector, press thepower button twice, then unplug it. You don’t have to wait for the projector to cool down. Adjust the image 1 If you don’t see an image, press the Source Search button on the projector or the Search button on the remote control to select the image source. NOTE: If you still see a blank screen or have other display problems, see the troubleshooting tips on the back of this sheet. 2 To raise the image, press the blue foot release button and lift the front of the projector. Release the button to lock the foot in position. 3 Turn the focus ring to sharpen the image. Turn the zoom ring to reduce or enlarge the image. Zoom Focus 4 If your image looks likeor, you’ve placed the projector off to one side of the screen at an angle. Place it directly in front of the center of the screen, facing the screen squarely. 5 If your image looks likeor, press theorbuttons on the projector to correct it. Using the remote control Make sure the batteries are installed as shown (two AA batteries). Change presentation slides (USB connection only) Navigate projector menus Choose which source to display Control projector volume Turn projector on and off Turn off projector display and sound You can use the remote control to operate the projector. With the USB cable, you can use the remote as a wireless mouse. For more information on using the remote control, see your User’s Guide. PowerLite® 85/825/826W *411676200**411676200* DC-06 document camera Digital camera Thumb drive
Quick Setup Before using the projector, make sure you read the safety instructions in the User’s Guide on your projector CD. Connect the projector Choose from the following connections: Computer Monitor Port Connect a computer using the VGA cable that came with the projector. Connect one end to the projector’s Computer1 or Computer2 port, and the other end to your computer’smonitor port. If you are using a notebook, switch it to external display. You can also connect an audio cable or microphone. Computer USB Port Connect a computer (Windows® 2000 or later only) using the USB cable that came with the projector. Connect the square end of the USB cable to the projector’sType B (square) USB port. Connect the flat end of the cable to any USB port on your computer. You can also connect an audio cable or microphone. Follow the on-screen instructions to install the Epson USB Display software. Then press the USB button on the remote control. Network (LAN) Connect the projector to your network using an Ethernet® cable. See “Project Over the Network” on the back of this sheet for more information. Microphone Connect a dynamic microphone to the Mic port, using a 3.5 mm mini-jack cable. Video Player Connect up to 4 video devices and use the remote control to switch between them. RCA video cable (composite video)(optional) S-Video cable(optional) Component video to VGA cable(optional)Audio cable (optional) Camera or USB Device Connect a digital camera, document camera, or other USB device to the projector’sType A (flat) USB port. If you connect a digital camera or USB storage device, you can use the projector’s Slideshow feature. See the EasyMP Operation Guide on your projector CD. For information on playing sound through the projector or connecting an external monitor, see the User’s Guide on your projector CD. Turn on your equipment 1 Turn on your computer or video source. 2 Plug in the projector. 3 Open the A/V Mute slide all the way. 4 Press thepower button on the projector or remote control. Power light Power button Thepower light flashes green, then stays on. NOTE: To shut down the projector, press thepower button twice, then unplug it. You don’t have to wait for the projector to cool down. Adjust the image 1 If you don’t see an image, press the Source Search button on the projector or the Search button on the remote control to select the image source. NOTE: If you still see a blank screen or have other display problems, see the troubleshooting tips on the back of this sheet. 2 To raise the image, press the blue foot release button and lift the front of the projector. Release the button to lock the foot in position. 3 Turn the focus ring to sharpen the image. Turn the zoom ring to reduce or enlarge the image. Zoom Focus 4 If your image looks likeor, you’ve placed the projector off to one side of the screen at an angle. Place it directly in front of the center of the screen, facing the screen squarely. 5 If your image looks likeor, press theorbuttons on the projector to correct it. Using the remote control Make sure the batteries are installed as shown (two AA batteries). Change presentation slides (USB connection only) Navigate projector menus Choose which source to display Control projector volume Turn projector on and off Turn off projector display and sound You can use the remote control to operate the projector. With the USB cable, you can use the remote as a wireless mouse. For more information on using the remote control, see your User’s Guide. PowerLite® 85/825/826W *411676200**411676200* DC-06 document camera Digital camera Thumb drive
Troubleshooting If you see a blank screen... If you see a blank screen or the No signal message after turning on your computer, check the following: • Make sure the power light on the projector is green and not flashing, and the A/V Mute slide is open. • Press the Source Search button on the projector or the Search button on the remote control to select the computer as the image source. • If you’re using a Windows notebook, press the function key on your keyboard that lets you display on an external monitor. It may be labelled CRT/LCD or have an icon such as. You may have to hold down the Fn key while pressing it. If the projector and notebook don’t display the same image... Windows Try using the CRT/LCD orkey as described above. On most systems, this key lets you toggle between the LCD screen and the projector, or display on both at the same time. If that doesn’t work, check your monitor settings to make sure both the LCD screen and the external monitor port are enabled. 1 From the Windows Control Panel, open the Display utility. In Windows Vista®, right-click on the desktop and select Personalize, then select Display Settings. 2 Click Settings, then click Advanced. In Windows Vista, click Advanced Settings. 3 The method for adjusting the setting varies; you may have to click a Monitor tab, then make sure the external Monitor port is set as your primary display and/or enabled. Mac OS® X 1 From the Apple® menu, select System Preferences, then select Display or Displays. 2 Click Detect Displays. 3 Make sure the VGA Display or Color LCD dialog box is selected. 4 Click Arrangement or Arrange, then make sure Mirror Displays is selected. Project over the network Install EMP NS Connection on each computer that will project over the network. Use the CD labeled Epson Projector Software for Meeting & Monitoring to install EMP NS Connection. If you need to configure the projector for your network, see “Network Configuration.” 1 Press the LAN button on the remote control. 2 Start EMP NS Connection on your computer. Windows: Select Start > Programs or All Programs > EPSON Projector > EMP NS Connection. Mac OS® X: Double-click the EMP NS Connection icon in your Applications folder. 3 Select Advanced Connection Mode and click OK. 4 Select the projector you want to connect to, then click Connect. If you don’t see the projector you want, click the Automatic search button. 5 If you see a message asking for a keyword, enter the four digits that appear on the LAN standby screen and click OK. Your computer image is projected, with a floating toolbar: When you’re done presenting, click Disconnect on the toolbar. NOTE: Using the optional Wireless LAN module, you can project wirelessly. To purchase the Wireless LAN module or other accessories, see “Optional Accessories.” For more information about using the projector on a network, see your User’s Guide and EasyMP Operation Guide. Epson is a registered trademark and Epson Exceed Your Vision is a registered logomark of Seiko Epson Corporation. PrivateLine is a registered trademark of Epson America, Inc. General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks. This information is subject to change without notice. © 2009 Epson America, Inc. 2/09 Printed in XXXXXX CPD-27443 Network configuration If you need to configure the projector for your network, you can use the projector’s menu system. 1 Press the Menu button on the remote control, select the Network menu, then press Enter. 2 Choose Network Configuration and press Enter. 3 Select the Wired LAN menu and press Enter. 4 Choose IP Settings and press Enter. You see a screen like the following: 5 Do one of the following: • If your network assigns addresses automatically, turn on the DHCP setting. • If your network does not assign addresses automatically, turn off DHCP and enter the projector’s IP Address, Subnet Mask, and Gateway Address, as needed. To enter numbers, use thebuttons on the remote control to highlight the number you want to input, then press the Enter button. When you’re finished entering an address in the network menu, highlight Return, then press the Enter button. 6 To prevent the IP address from appearing on the standby screen, set the IP Address Display setting to Off. 7 When you’re done making all necessary changes, select Complete and press the Enter button to save your settings. Then press Enter again to confirm. 8 Press the Menu button to exit the menu system. Where to get help Manuals For more information about using the projector, install the manuals from your projector CD. Telephone Support Services To use the Epson PrivateLine® Support service, call (800) 637-7661 and enter the PIN on the Epson PrivateLine Support card included with your projector. This service is available 6 AM to 6 PM, Pacific Time, Monday through Friday, for the duration of your warranty period. You may also speak with a projector support specialist by dialing one of these numbers: U.S.: (562) 276-4394, 6 AM to 6 PM, Pacific Time, Monday through Friday Canada: (905) 709-3839, 6 AM to 6 PM, Pacific Time, Monday through Friday Days and hours of support are subject to change without notice. Toll or long distance charges may apply. Internet Support Visit Epson’s support website at epson.com/support and select your product for solutions to common problems. You can download utilities and documentation, get FAQs and troubleshooting advice, or e-mail Epson with your questions. Registration Register today to get product updates, special promotions, and customer-only offers. You can use the registration card or CD included with your projector, or register online at www.epson.com/webreg. Optional accessories You can purchase screens, carrying cases, or other accessories from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online at www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales). Product Part number Replacement lamp V13H010L50 Air filter replacement set (2 filters) V13H134A22 Image presentation camera (ELPDC05) V12H162020 DC-10s document camera ELPDC10S DC-06 document camera V12H321001 Wireless LAN module V12H306P11 Quick Wireless Connection USB key V12H005M05
Troubleshooting If you see a blank screen... If you see a blank screen or the No signal message after turning on your computer, check the following: • Make sure the power light on the projector is green and not flashing, and the A/V Mute slide is open. • Press the Source Search button on the projector or the Search button on the remote control to select the computer as the image source. • If you’re using a Windows notebook, press the function key on your keyboard that lets you display on an external monitor. It may be labelled CRT/LCD or have an icon such as. You may have to hold down the Fn key while pressing it. If the projector and notebook don’t display the same image... Windows Try using the CRT/LCD orkey as described above. On most systems, this key lets you toggle between the LCD screen and the projector, or display on both at the same time. If that doesn’t work, check your monitor settings to make sure both the LCD screen and the external monitor port are enabled. 1 From the Windows Control Panel, open the Display utility. In Windows Vista®, right-click on the desktop and select Personalize, then select Display Settings. 2 Click Settings, then click Advanced. In Windows Vista, click Advanced Settings. 3 The method for adjusting the setting varies; you may have to click a Monitor tab, then make sure the external Monitor port is set as your primary display and/or enabled. Mac OS® X 1 From the Apple® menu, select System Preferences, then select Display or Displays. 2 Click Detect Displays. 3 Make sure the VGA Display or Color LCD dialog box is selected. 4 Click Arrangement or Arrange, then make sure Mirror Displays is selected. Project over the network Install EMP NS Connection on each computer that will project over the network. Use the CD labeled Epson Projector Software for Meeting & Monitoring to install EMP NS Connection. If you need to configure the projector for your network, see “Network Configuration.” 1 Press the LAN button on the remote control. 2 Start EMP NS Connection on your computer. Windows: Select Start > Programs or All Programs > EPSON Projector > EMP NS Connection. Mac OS® X: Double-click the EMP NS Connection icon in your Applications folder. 3 Select Advanced Connection Mode and click OK. 4 Select the projector you want to connect to, then click Connect. If you don’t see the projector you want, click the Automatic search button. 5 If you see a message asking for a keyword, enter the four digits that appear on the LAN standby screen and click OK. Your computer image is projected, with a floating toolbar: When you’re done presenting, click Disconnect on the toolbar. NOTE: Using the optional Wireless LAN module, you can project wirelessly. To purchase the Wireless LAN module or other accessories, see “Optional Accessories.” For more information about using the projector on a network, see your User’s Guide and EasyMP Operation Guide. Epson is a registered trademark and Epson Exceed Your Vision is a registered logomark of Seiko Epson Corporation. PrivateLine is a registered trademark of Epson America, Inc. General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks. This information is subject to change without notice. © 2009 Epson America, Inc. 2/09 Printed in XXXXXX CPD-27443 Network configuration If you need to configure the projector for your network, you can use the projector’s menu system. 1 Press the Menu button on the remote control, select the Network menu, then press Enter. 2 Choose Network Configuration and press Enter. 3 Select the Wired LAN menu and press Enter. 4 Choose IP Settings and press Enter. You see a screen like the following: 5 Do one of the following: • If your network assigns addresses automatically, turn on the DHCP setting. • If your network does not assign addresses automatically, turn off DHCP and enter the projector’s IP Address, Subnet Mask, and Gateway Address, as needed. To enter numbers, use thebuttons on the remote control to highlight the number you want to input, then press the Enter button. When you’re finished entering an address in the network menu, highlight Return, then press the Enter button. 6 To prevent the IP address from appearing on the standby screen, set the IP Address Display setting to Off. 7 When you’re done making all necessary changes, select Complete and press the Enter button to save your settings. Then press Enter again to confirm. 8 Press the Menu button to exit the menu system. Where to get help Manuals For more information about using the projector, install the manuals from your projector CD. Telephone Support Services To use the Epson PrivateLine® Support service, call (800) 637-7661 and enter the PIN on the Epson PrivateLine Support card included with your projector. This service is available 6 AM to 6 PM, Pacific Time, Monday through Friday, for the duration of your warranty period. You may also speak with a projector support specialist by dialing one of these numbers: U.S.: (562) 276-4394, 6 AM to 6 PM, Pacific Time, Monday through Friday Canada: (905) 709-3839, 6 AM to 6 PM, Pacific Time, Monday through Friday Days and hours of support are subject to change without notice. Toll or long distance charges may apply. Internet Support Visit Epson’s support website at epson.com/support and select your product for solutions to common problems. You can download utilities and documentation, get FAQs and troubleshooting advice, or e-mail Epson with your questions. Registration Register today to get product updates, special promotions, and customer-only offers. You can use the registration card or CD included with your projector, or register online at www.epson.com/webreg. Optional accessories You can purchase screens, carrying cases, or other accessories from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online at www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales). Product Part number Replacement lamp V13H010L50 Air filter replacement set (2 filters) V13H134A22 Image presentation camera (ELPDC05) V12H162020 DC-10s document camera ELPDC10S DC-06 document camera V12H321001 Wireless LAN module V12H306P11 Quick Wireless Connection USB key V12H005M05
Troubleshooting If you see a blank screen... If you see a blank screen or the No signal message after turning on your computer, check the following: • Make sure the power light on the projector is green and not flashing, and the A/V Mute slide is open. • Press the Source Search button on the projector or the Search button on the remote control to select the computer as the image source. • If you’re using a Windows notebook, press the function key on your keyboard that lets you display on an external monitor. It may be labelled CRT/LCD or have an icon such as. You may have to hold down the Fn key while pressing it. If the projector and notebook don’t display the same image... Windows Try using the CRT/LCD orkey as described above. On most systems, this key lets you toggle between the LCD screen and the projector, or display on both at the same time. If that doesn’t work, check your monitor settings to make sure both the LCD screen and the external monitor port are enabled. 1 From the Windows Control Panel, open the Display utility. In Windows Vista®, right-click on the desktop and select Personalize, then select Display Settings. 2 Click Settings, then click Advanced. In Windows Vista, click Advanced Settings. 3 The method for adjusting the setting varies; you may have to click a Monitor tab, then make sure the external Monitor port is set as your primary display and/or enabled. Mac OS® X 1 From the Apple® menu, select System Preferences, then select Display or Displays. 2 Click Detect Displays. 3 Make sure the VGA Display or Color LCD dialog box is selected. 4 Click Arrangement or Arrange, then make sure Mirror Displays is selected. Project over the network Install EMP NS Connection on each computer that will project over the network. Use the CD labeled Epson Projector Software for Meeting & Monitoring to install EMP NS Connection. If you need to configure the projector for your network, see “Network Configuration.” 1 Press the LAN button on the remote control. 2 Start EMP NS Connection on your computer. Windows: Select Start > Programs or All Programs > EPSON Projector > EMP NS Connection. Mac OS® X: Double-click the EMP NS Connection icon in your Applications folder. 3 Select Advanced Connection Mode and click OK. 4 Select the projector you want to connect to, then click Connect. If you don’t see the projector you want, click the Automatic search button. 5 If you see a message asking for a keyword, enter the four digits that appear on the LAN standby screen and click OK. Your computer image is projected, with a floating toolbar: When you’re done presenting, click Disconnect on the toolbar. NOTE: Using the optional Wireless LAN module, you can project wirelessly. To purchase the Wireless LAN module or other accessories, see “Optional Accessories.” For more information about using the projector on a network, see your User’s Guide and EasyMP Operation Guide. Epson is a registered trademark and Epson Exceed Your Vision is a registered logomark of Seiko Epson Corporation. PrivateLine is a registered trademark of Epson America, Inc. General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks. This information is subject to change without notice. © 2009 Epson America, Inc. 2/09 Printed in XXXXXX CPD-27443 Network configuration If you need to configure the projector for your network, you can use the projector’s menu system. 1 Press the Menu button on the remote control, select the Network menu, then press Enter. 2 Choose Network Configuration and press Enter. 3 Select the Wired LAN menu and press Enter. 4 Choose IP Settings and press Enter. You see a screen like the following: 5 Do one of the following: • If your network assigns addresses automatically, turn on the DHCP setting. • If your network does not assign addresses automatically, turn off DHCP and enter the projector’s IP Address, Subnet Mask, and Gateway Address, as needed. To enter numbers, use thebuttons on the remote control to highlight the number you want to input, then press the Enter button. When you’re finished entering an address in the network menu, highlight Return, then press the Enter button. 6 To prevent the IP address from appearing on the standby screen, set the IP Address Display setting to Off. 7 When you’re done making all necessary changes, select Complete and press the Enter button to save your settings. Then press Enter again to confirm. 8 Press the Menu button to exit the menu system. Where to get help Manuals For more information about using the projector, install the manuals from your projector CD. Telephone Support Services To use the Epson PrivateLine® Support service, call (800) 637-7661 and enter the PIN on the Epson PrivateLine Support card included with your projector. This service is available 6 AM to 6 PM, Pacific Time, Monday through Friday, for the duration of your warranty period. You may also speak with a projector support specialist by dialing one of these numbers: U.S.: (562) 276-4394, 6 AM to 6 PM, Pacific Time, Monday through Friday Canada: (905) 709-3839, 6 AM to 6 PM, Pacific Time, Monday through Friday Days and hours of support are subject to change without notice. Toll or long distance charges may apply. Internet Support Visit Epson’s support website at epson.com/support and select your product for solutions to common problems. You can download utilities and documentation, get FAQs and troubleshooting advice, or e-mail Epson with your questions. Registration Register today to get product updates, special promotions, and customer-only offers. You can use the registration card or CD included with your projector, or register online at www.epson.com/webreg. Optional accessories You can purchase screens, carrying cases, or other accessories from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online at www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales). Product Part number Replacement lamp V13H010L50 Air filter replacement set (2 filters) V13H134A22 Image presentation camera (ELPDC05) V12H162020 DC-10s document camera ELPDC10S DC-06 document camera V12H321001 Wireless LAN module V12H306P11 Quick Wireless Connection USB key V12H005M05
Troubleshooting If you see a blank screen... If you see a blank screen or the No signal message after turning on your computer, check the following: • Make sure the power light on the projector is green and not flashing, and the A/V Mute slide is open. • Press the Source Search button on the projector or the Search button on the remote control to select the computer as the image source. • If you’re using a Windows notebook, press the function key on your keyboard that lets you display on an external monitor. It may be labelled CRT/LCD or have an icon such as. You may have to hold down the Fn key while pressing it. If the projector and notebook don’t display the same image... Windows Try using the CRT/LCD orkey as described above. On most systems, this key lets you toggle between the LCD screen and the projector, or display on both at the same time. If that doesn’t work, check your monitor settings to make sure both the LCD screen and the external monitor port are enabled. 1 From the Windows Control Panel, open the Display utility. In Windows Vista®, right-click on the desktop and select Personalize, then select Display Settings. 2 Click Settings, then click Advanced. In Windows Vista, click Advanced Settings. 3 The method for adjusting the setting varies; you may have to click a Monitor tab, then make sure the external Monitor port is set as your primary display and/or enabled. Mac OS® X 1 From the Apple® menu, select System Preferences, then select Display or Displays. 2 Click Detect Displays. 3 Make sure the VGA Display or Color LCD dialog box is selected. 4 Click Arrangement or Arrange, then make sure Mirror Displays is selected. Project over the network Install EMP NS Connection on each computer that will project over the network. Use the CD labeled Epson Projector Software for Meeting & Monitoring to install EMP NS Connection. If you need to configure the projector for your network, see “Network Configuration.” 1 Press the LAN button on the remote control. 2 Start EMP NS Connection on your computer. Windows: Select Start > Programs or All Programs > EPSON Projector > EMP NS Connection. Mac OS® X: Double-click the EMP NS Connection icon in your Applications folder. 3 Select Advanced Connection Mode and click OK. 4 Select the projector you want to connect to, then click Connect. If you don’t see the projector you want, click the Automatic search button. 5 If you see a message asking for a keyword, enter the four digits that appear on the LAN standby screen and click OK. Your computer image is projected, with a floating toolbar: When you’re done presenting, click Disconnect on the toolbar. NOTE: Using the optional Wireless LAN module, you can project wirelessly. To purchase the Wireless LAN module or other accessories, see “Optional Accessories.” For more information about using the projector on a network, see your User’s Guide and EasyMP Operation Guide. Epson is a registered trademark and Epson Exceed Your Vision is a registered logomark of Seiko Epson Corporation. PrivateLine is a registered trademark of Epson America, Inc. General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks. This information is subject to change without notice. © 2009 Epson America, Inc. 2/09 Printed in XXXXXX CPD-27443 Network configuration If you need to configure the projector for your network, you can use the projector’s menu system. 1 Press the Menu button on the remote control, select the Network menu, then press Enter. 2 Choose Network Configuration and press Enter. 3 Select the Wired LAN menu and press Enter. 4 Choose IP Settings and press Enter. You see a screen like the following: 5 Do one of the following: • If your network assigns addresses automatically, turn on the DHCP setting. • If your network does not assign addresses automatically, turn off DHCP and enter the projector’s IP Address, Subnet Mask, and Gateway Address, as needed. To enter numbers, use thebuttons on the remote control to highlight the number you want to input, then press the Enter button. When you’re finished entering an address in the network menu, highlight Return, then press the Enter button. 6 To prevent the IP address from appearing on the standby screen, set the IP Address Display setting to Off. 7 When you’re done making all necessary changes, select Complete and press the Enter button to save your settings. Then press Enter again to confirm. 8 Press the Menu button to exit the menu system. Where to get help Manuals For more information about using the projector, install the manuals from your projector CD. Telephone Support Services To use the Epson PrivateLine® Support service, call (800) 637-7661 and enter the PIN on the Epson PrivateLine Support card included with your projector. This service is available 6 AM to 6 PM, Pacific Time, Monday through Friday, for the duration of your warranty period. You may also speak with a projector support specialist by dialing one of these numbers: U.S.: (562) 276-4394, 6 AM to 6 PM, Pacific Time, Monday through Friday Canada: (905) 709-3839, 6 AM to 6 PM, Pacific Time, Monday through Friday Days and hours of support are subject to change without notice. Toll or long distance charges may apply. Internet Support Visit Epson’s support website at epson.com/support and select your product for solutions to common problems. You can download utilities and documentation, get FAQs and troubleshooting advice, or e-mail Epson with your questions. Registration Register today to get product updates, special promotions, and customer-only offers. You can use the registration card or CD included with your projector, or register online at www.epson.com/webreg. Optional accessories You can purchase screens, carrying cases, or other accessories from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online at www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales). Product Part number Replacement lamp V13H010L50 Air filter replacement set (2 filters) V13H134A22 Image presentation camera (ELPDC05) V12H162020 DC-10s document camera ELPDC10S DC-06 document camera V12H321001 Wireless LAN module V12H306P11 Quick Wireless Connection USB key V12H005M05