Epson Powerlite 83v+ Multimedia Projector Users Guide

Solving Problems81
Nothing appears on the external monitor.
■Make sure the VGA computer cable is connected to your 
computer’s video port and the projector’s 
Computer1 port. 
■Make sure the cable from your monitor is connected to the 
projector’s 
Monitor Out port.
You see a blue screen with the message No Signal displayed.
■Make sure the cables are connected correctly, as described in 
Chapter 1.
■Make sure the power to your computer or video source is 
turned on.
■If you’ve connected a computer and...

82Solving Problems
Only part of the computer image is displayed.
■If you’re projecting from a computer or RGB video device, press 
the 
Enter/Auto button on the remote control. If this doesn’t 
work, you may need to adjust the 
Position setting in the Signal 
menu. See page 55 for more information.
■If you’ve enlarged part of the image using the E-Zoom button on 
the remote control, press the 
Esc button to cancel zooming and 
return to full display.
■Try pressing the Aspect button on the remote control...

Solving Problems83
The image contains static or noise.
■If you’re using a computer cable longer than 6 feet (2 meters), or 
an extension cable, the image quality may be reduced.
■Keep your computer and video cables separated from the power 
cord as much as possible to prevent interference.
■The video signal may be split between the computer and the 
projector. If you notice a decline in the projected image quality 
when the image is displayed simultaneously on your laptop 
computer and the projector,...

84Solving Problems
You see vertical stripes or the image still looks blurry after 
trying the solutions in the previous section.
■If you’re projecting from a computer and displaying an image that 
contains a lot of fine detail, you may notice one or more vertical 
stripes or bands, or some of the characters may look heavy or 
blurred. Press the 
Enter/Auto button on the remote control to 
automatically reset the projector’s tracking and sync settings.
■If necessary, you can manually adjust the Tracking...

Solving Problems85
There is no sound.
■Press the   button on the projector or the Vol+ button on the 
remote control to turn up the volume.
■If you’ve turned off the picture and sound, press the A/V Mute 
button on the remote control to turn them on again.
■If you’re using a DVD player or other video source, or external 
speakers, make sure their volume is not turned all the way down 
or muted. Also, make sure the cables are connected correctly, as 
described in Chapter 1.
■Make sure the audio cable is...

86Solving Problems
Solving Problems with the Remote 
Control
The projector doesn’t respond to remote control commands.
■Make sure you are within 20 feet of the projector, and within 
range of the projector’s front or back sensor (approximately 30° to 
the left or right and 15° above or below).
■If a button on the remote control is held for more than 30 
seconds, the remote enter sleep mode. Press another button for 
normal operation.
■The remote control batteries may not be installed correctly or may 
be...

Solving Problems87
Where To Get Help
Epson provides these technical support services:
Internet Support
Visit Epson’s support website for solutions to common problems with 
the PowerLite 83V+. You can download utilities and documentation, 
get FAQs and troubleshooting advice, or e-mail Epson with your 
questions.
Speak to a Support Representative
To use the Epson PrivateLine Support service, call (800) 637-7661 
and enter the PIN on the included Epson PrivateLine Support card. 
This is the fastest way of...

88Solving Problems
Purchase Supplies and Accessories
You can purchase screens, carrying cases, or other accessories from an 
Epson authorized reseller. To find the nearest reseller, call 
800-GO-EPSON (800-463-7766). Or you can purchase online at 
www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales). 

89
A
Technical Specifications
General
Type of display Poly-silicon TFT active matrix
Lens F=1.6 to 1.74, 18.4 to 22.12 mm
Resolution 1024 × 768 pixels (XGA)
Color reproduction Full color, 16.77 million colors
Light output
(brightness) High brightness mode
White light output 2200 lumens (ISO 
21118 standard)
Color light output 2200 lumens
Low brightness mode
White light output 1760 lumens (ISO 
21118 standard)
Contrast ratio 400:1
Image size 30 to 300 inches (0.8 to 7.6 meters)
Projection distance 2.7 to...

90Technical SpecificationsNoise level 35 dB (High brightness mode)
28 dB (Low brightness mode)
Keystone correction
angle
± 30° vertical (maximum)
Projection Lamp
Power consumption 170 W UHE
Lamp life About 3000 hours (High brightness);
4000 hours (Low brightness)
Remote Control
Range 20 feet (6 meters)
Batteries (2) Alkaline AA
Dimensions
Height (including feet) 4.3 inches (108 mm)
Width 12.9 inches (327 mm)
Depth 9.6 inches (245 mm)
Weight 6.4 lb (2.9 kg) 
Electrical 
Rated frequency 50/60 Hz
Power...