Home > Epson > Projector > Epson Powerlite 8000i Multimedia Projector Users Guide

Epson Powerlite 8000i Multimedia Projector Users Guide

    Download as PDF Print this page Share this page

    Have a look at the manual Epson Powerlite 8000i Multimedia Projector Users Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Safety Instructions
    11
    p
    If it does not operate normally when you follow the operating 
    instructions, or if it exhibits a distinct change in performance, 
    indicating a need for service
    p
    If it has been dropped or the housing has been damaged.
    17. If you use the projector in a country other than where you 
    purchased it, use the power cable that is suitable to that country.
    80009000.book  Page 11  Monday, November 1, 1999  9:35 AM 
    						
    							Introduction
      12
    80009000.book  Page 12  Monday, November 1, 1999  9:35 AM 
    						
    							13
    1Setting Up the Projector
    T
    his chapter describes how to unpack your projector, connect it to 
    other equipment, and turn everything on. The projector must be 
    connected to a computer or a video source such as a VCR, DVD 
    player, camcorder, digital camera, or laser disc player before it can 
    project any images. You may also want to set up the projector for one 
    or more of the following:
    p
    Connect the mouse cable to use the remote control as a wireless 
    mouse. Except for some laptops, this disables your computer’s 
    mouse. If you are also viewing the display on your monitor, you 
    use the remote control’s pointer to control the screen cursor.
    p
    Provide audio for one or both image sources. The audio source can 
    be the computer, video source, or another device such as a stereo.
    p
    Connect to an external speaker or PA system to amplify the audio.
    80009000.book  Page 13  Monday, November 1, 1999  9:35 AM 
    						
    							1  •  Setting Up the Projector
     14
    Unpacking the Projector
    When you unpack the projector, make sure you have all these 
    components:
    Projector
    Remote control
    2 AA batteries
    Power cord
    Projector video cable
    Audio cable
    RCA audio cable 
    Power
    FreezeA/V MuteE-ZoomR/C ON
    OFF31524EnterEsc
    80009000.book  Page 14  Monday, November 1, 1999  9:35 AM 
    						
    							Unpacking the Projector
    15
    RCA video cable
    Macintosh adapter set:
    Macintosh desktop adapter
    Macintosh monitor adapter
    Main cable (for connecting a mouse cable to
    use the remote as a wireless mouse and/or a
    serial cable to use the ELP Link IV software)
    PS/2
    ® mouse cable (for the PC)
    USB cable 
    Serial mouse cable (for the PC)
    80009000.book  Page 15  Monday, November 1, 1999  9:35 AM 
    						
    							1  •  Setting Up the Projector
     16
    Mac mouse cable (for the Macintosh) 
    PC serial cable 
    Macintosh serial cable
    Projector Software CD ROM
    You will not need all these components; your configuration will 
    determine which ones you need.
    Save all packaging in case you need to ship the projector in the future. 
    Always transport the projector in its original packaging (or the 
    equivalent), or use a carrying case if you are carrying the projector by 
    hand. (See page 141 for transporting instructions.)
    80009000.book  Page 16  Monday, November 1, 1999  9:35 AM 
    						
    							Unpacking the Projector
    17
    Additional Components
    Depending on how you plan to use the projector, you may need 
    additional components:p
    To receive an S-Video signal, you need an S-Video cable. (One is 
    usually provided with your video device.) A separate cable is 
    required for each video source.
    p
    To connect a second computer, you need a computer video and 
    audio cable.
    p
    To connect the projector to a Macintosh PowerBook, you may 
    need a video-out cable (provided by Apple). If your PowerBook 
    requires a video-out cable and you do not have one, see your 
    Macintosh dealer.
    Note: You cannot currently use the ELP Link IV software with a 
    Power Macintosh G3 or iMac. Check with your dealer for future 
    support.
    p
    To connect the projector to an external sound system, you need an 
    RCA-to-3.5 mm stereo audio cable. You can obtain one from your 
    computer dealer.
    p
    To connect the mouse cable to your computer, you may require a 
    special connector, cable, or other components. You can obtain 
    these items from your computer dealer. 
    Note: You can connect a Kensington MicroSaver
    ® a nt i-the ft  devi ce  in  
    the hole on the projector’s right side. Contact your computer dealer.
    80009000.book  Page 17  Monday, November 1, 1999  9:35 AM 
    						
    							1  •  Setting Up the Projector
     18
    Installing the Remote Control Batteries
    You can use the remote control as a wireless mouse instead of your 
    computer’s mouse to control your presentation. You can also use it to 
    control the projector menus and use the Effects buttons. 
    Follow these steps to install the batteries in the remote control:
    1. Slide off the battery compartment cover.
    2. Insert the two AA batteries included with the projector. Make sure 
    the polarity of the batteries is correct.
    80009000.book  Page 18  Monday, November 1, 1999  9:35 AM 
    						
    							Before You Connect the Projector
    19
    3. Replace the battery compartment cover.
    When replacing batteries, take the following precautions:p
    Do not mix old and new batteries.
    p
    Replace batteries as soon as they run out. If the batteries leak, wipe 
    away battery fluid with a soft cloth. If fluid gets on your hands, 
    wash them immediately.
    p
    Remove batteries if you will not be using the projector for a long 
    period of time.
    Before You Connect the Projector
    Before you start connecting the projector to your equipment, decide 
    where you will want to place your projector and computer or video 
    source. The distance between the projector and the screen determines 
    the actual image size. Place the projector somewhere between 3.6 and 
    52.1 feet (1.1 and 15.9 meters) away from the screen; use the general 
    guidelines in the table below to determine the proper distance. (For 
    more precise calculations, see “Positioning the Projector” on page 62.) 
    Caution: Do not hold or lift the projector by the lens. This can damage the 
    lens.
    80009000.book  Page 19  Monday, November 1, 1999  9:35 AM 
    						
    							1  •  Setting Up the Projector
     20
    Be sure to place the projector on a sturdy, level surface within five feet 
    of the computer or video source.Image size (diagonal)Horizontal distance from projector to screen
    Minimum Maximum
    300 inches (10 m) 460.6 inches (11.7 m) 586.6 inches (14.9 m)
    200 inches (5.1 m) 307.1 inches (7.8 m) 389.8 inches (9.9 m)
    100 inches (2.54 m) 153.5 inches (3.9 m) 192.9 inches (4.9 m)
    80 inches (2.03 m)  122.0 inches (3.1 m) 153.5 inches (3.9 m)
    60 inches (1.52 m) 90.6 inches (2.3 m) 114.2 inches (2.9 m)
    40 inches (1.02 m) 59.1 inches (1.5 m) 74.8 inches (1.9 m)
    30 inches (0.76 m) 43.3 inches (1.1 m) 55.1 inches (1.4 m)
    80009000.book  Page 20  Monday, November 1, 1999  9:35 AM 
    						
    All Epson manuals Comments (0)

    Related Manuals for Epson Powerlite 8000i Multimedia Projector Users Guide