Home > Epson > Projector > Epson Powerlite 7800p Technical Specifications

Epson Powerlite 7800p Technical Specifications

    Download as PDF Print this page Share this page

    Have a look at the manual Epson Powerlite 7800p Technical Specifications online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							EPSON PowerLite 7800p Projector
    20 - EPSON PowerLite 7800p Projector 5/03 Follow these steps to replace the lamp and air filters:
    1. Turn off the projector.
    2. When the P power light stops flashing, unplug the power 
    cord.
    3. Let the projector cool for at least half an hour (if it has been 
    on). The lamp is extremely hot immediately after use. 
    4. Turn the projector upside-down and remove the air filters 
    at the side and bottom of the projector.
    5. Insert the two new air filters. They should click into place.
    6. To remove the lamp cover, insert the screwdriver supplied 
    with the spare lamp (or another flat-tipped screwdriver), 
    into the space beside the air vent to gently lift the lamp 
    cover off.7. Loosen the two screws holding the lamp in place. (You 
    don’t need to remove them.) 
    8. Grasp the wire handle as shown and pull the lamp straight 
    out. 
    9. Gently insert the new lamp. 
    10. Once the lamp is fully inserted, tighten its screws and 
    replace the cover. (The projector won’t come on if the lamp 
    cover is loose.) 
    11. Reset the lamp timer as described in the next section. 
    Resetting the Lamp Timer
    After you replace the lamp, you need to reset the lamp timer 
    using the projector’s About menu. 
    1. Press the 
    Menu button on the remote control or the 
    projector’s control panel to display the main menu.
    2. Use the  pointer button on the remote control (or the 
    arrow buttons on the projector) to highlight 
    About, then 
    press 
    Enter. 
    Slide the filter 
    up here . . .
    . . . and hereLower the 
    handle
    1
    Insert the screwdriver here 
    						
    							EPSON PowerLite 7800p Projector
    5/03 EPSON PowerLite 7800p Projector - 21 You see this screen: 
    Note: The lamp usage timer shows 
    0H until you’ve used the 
    lamp for at least 10 hours.
    3. Select 
    Reset Lamp 
    Timer
    , then press Enter. 
    You see this prompt:
    4. Select 
    Yes, then press Enter.
    5. When you’re finished, press 
    ESC or Menu to exit. 
    Transporting the Projector
    The projector contains many glass and precision parts. Follow 
    these guidelines to prevent injury or damage when 
    transporting it:
    ❏When hand-carrying the projector, you should use the 
    handle to carry it only a short distance (for example, to set 
    it on a table). 
    ❏When shipping the projector for repairs, use the original 
    packaging material if possible. If you do not have the 
    original packaging, use equivalent materials, placing plenty 
    of cushioning around the projector.
    ❏When transporting the projector a long distance, first place 
    it in a hard-shell shipping case, and then pack it in a firm 
    box, placing cushioning around the case. (An optional ATA 
    shipping case is available from EPSON; see the following 
    table.)
    Note: EPSON shall not be liable for any damages incurred 
    during transportation. 
    Optional Accessories
    You can purchase these accessories from your dealer, by calling 
    EPSON at (800) 873-7766, or by visiting the EPSON Store  
    at www.epsonstore.com (U.S. sales only). In Canada, please 
    call (800) 463-7766 for dealer referral.
    Related Documentation
    CPD-15988 EPSON PowerLite 7800p User’s Guide
    CPD-15989 EPSON PowerLite 7800p Quick Setup
    sheet
    VideoVideoAudioAudio
    SettingSettingUsers LogoUsers LogoAdvanced1Advanced1
    AboutAboutReset AllReset All
    FrequencyFrequency
    Video SourceVideo Source
    V ---.---HzV ---.---Hz
    Reset Lamp TimerReset Lamp Timer
    H ---.---kHzH ---.---kHz
    LampLamp1400H1400H
    SYNC ModeSYNC Mode
    SYNC PolaritySYNC Polarity
    ------------V ------V ------H ------H ------
    ResolutionResolutionRefresh RateRefresh Rate---.-- Hz---.-- Hz----x    --------x    ----
    Computer1Computer1Input SignalInput Signal: : :
    : :
    :
    : :Analog-RGBAnalog-RGB
    ExecuteExecute
    [    ]: Select[    ]: Select[    ]: Enter[    ]: Enter[Menu]: Exit[Menu]: Exit
    EffectEffect
    Advanced2Advanced2
    Lamp usageProduct Part number
    Replacement lamp and air filters V13H010L22
    Replacement air filters V13H134A01
    Customized shipping case ELPKS46
    Ceiling mount
    Suspension adapter
    False ceiling plateELPMB40
    ELPMBAPL
    ELPMBFCP
    Middle Throw Zoom Lens
    Long Throw Zoom Lens V12H004M03
    V12H004L05
    Kensington
    ® security lock  ELPSL01
    Projection screens:
    50-inch portable screen 
    60-inch portable pop-up screen
    80-inch portable pop-up screenELPSC06
    ELPSC07
    ELPSC08
    Macintosh adapter set (includes monitor 
    adapter and desktop adapter)ELPAP01
    Remote control cable set  V12H005C28
    DVI-to-DVI digital video cable, 10 ft.
    DVI-to-DFP digital video cable, 10 ft.ELPKC20
    ELPKC21
    S-Video cable ELPSV01
    Distribution amplifier ELPDA01
    High resolution document imager
    High resolution document cameraELPDC02
    V12H064020
    SM 
    						
    All Epson manuals Comments (0)

    Related Manuals for Epson Powerlite 7800p Technical Specifications