Home > Epson > Projector > Epson Powerlite 77c Quick Setup Manual

Epson Powerlite 77c Quick Setup Manual

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual Epson Powerlite 77c Quick Setup Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 6
    Add page 1 to Favourites
    image text
    Enable zoom 
    							
Quick SetupChoose a location
The projector supports 4 viewing setups. Choose the best one for 
your environment. If you install the projector in a rear or overhead 
position, you’ll need to choose the correct projection option, 
identified below, from the Extended menu. See the User’s Guide 
on your CD-ROM for instructions. 
 
 Table 
  Convenient for temporary front projection.
 
  Choose 
Front from the menu.
 Ceiling 
  Professional installation recommended. 
 
  Choose 
Front /Ceiling from the menu.
 
 Rear 
   
For installation behind a translucent screen. 
Choose Rear from the menu.
 
 Rear/Ceiling 
   Professional installation recommended.   
  Choose 
Rear/Ceiling from the menu.
The distance between the projector and the screen determines  
the size of the image. The diagrams below show approximately  
how big your image will be (diagonally), based on where you set up 
the projector. (For more help determining the size of your image, 
try the Image Size Calculator on the Multimedia Projectors page on 
Epson’s web site.)
2 Connect your video source
Connect the projector to a computer or video source using any of the available 
connections shown below.
 • Check the connectors on your video equipment. If more than one 
    connection is available, choose the one that provides the best quality.
 
    The projector connectors from highest to lowest quality are
 
    Computer (Component Video), S-Video, and Video.
 •   A computer cable is included. You can purchase optional video and 
audio cables through Epson® or an electronics store. 
 •   You can connect up to 3 video devices and use the remote control to 
switch between them. 
	
NOTE		
You	 can	also	 connect	 an	external	 monitor	(to	watch	 the	display	
on	 your	 computer	 monitor	while	watching	 the	projection	 screen),	
and	 a	USB	 cable	 to	use	 the	remote	 control	to	change	 presentation	
slides.	 See	the	
User’s Guide 	on	 your	 CD-ROM	 for	instructions.
3 Set up the remote control
 1  Remove the battery cover.
 2   Insert the batteries. 
 3 Replace the battery cover. 
 
The remote control is ready for use.
Turn over
PowerLite
®
 S5 Series/77c
1 Unpack the projector
 You should have the following items:
ProjectorPower cordComputer cable
User’s Guide 
CD-ROM
Carrying casePassword protect 
sticker
Projector 
remote control
Batteries
RCA video cable  (composite video)(optional)
S-Video  cable(optional)
Component  video to  VGA cable(optional)
Computer  cable  (included)
EPSON
Audio ports
PowerLite S5 Series 
PowerLite 77c
    Add page 2 to Favourites
    image text
    Enable zoom 
    							
Quick SetupChoose a location
The projector supports 4 viewing setups. Choose the best one for 
your environment. If you install the projector in a rear or overhead 
position, you’ll need to choose the correct projection option, 
identified below, from the Extended menu. See the User’s Guide 
on your CD-ROM for instructions. 
 
 Table 
  Convenient for temporary front projection.
 
  Choose 
Front from the menu.
 Ceiling 
  Professional installation recommended. 
 
  Choose 
Front /Ceiling from the menu.
 
 Rear 
   
For installation behind a translucent screen. 
Choose Rear from the menu.
 
 Rear/Ceiling 
   Professional installation recommended.   
  Choose 
Rear/Ceiling from the menu.
The distance between the projector and the screen determines  
the size of the image. The diagrams below show approximately  
how big your image will be (diagonally), based on where you set up 
the projector. (For more help determining the size of your image, 
try the Image Size Calculator on the Multimedia Projectors page on 
Epson’s web site.)
2 Connect your video source
Connect the projector to a computer or video source using any of the available 
connections shown below.
 • Check the connectors on your video equipment. If more than one 
    connection is available, choose the one that provides the best quality.
 
    The projector connectors from highest to lowest quality are
 
    Computer (Component Video), S-Video, and Video.
 •   A computer cable is included. You can purchase optional video and 
audio cables through Epson® or an electronics store. 
 •   You can connect up to 3 video devices and use the remote control to 
switch between them. 
	
NOTE		
You	 can	also	 connect	 an	external	 monitor	(to	watch	 the	display	
on	 your	 computer	 monitor	while	watching	 the	projection	 screen),	
and	 a	USB	 cable	 to	use	 the	remote	 control	to	change	 presentation	
slides.	 See	the	
User’s Guide 	on	 your	 CD-ROM	 for	instructions.
3 Set up the remote control
 1  Remove the battery cover.
 2   Insert the batteries. 
 3 Replace the battery cover. 
 
The remote control is ready for use.
Turn over
PowerLite
®
 S5 Series/77c
1 Unpack the projector
 You should have the following items:
ProjectorPower cordComputer cable
User’s Guide 
CD-ROM
Carrying casePassword protect 
sticker
Projector 
remote control
Batteries
RCA video cable  (composite video)(optional)
S-Video  cable(optional)
Component  video to  VGA cable(optional)
Computer  cable  (included)
EPSON
Audio ports
PowerLite S5 Series 
PowerLite 77c
    Add page 3 to Favourites
    image text
    Enable zoom 
    							
Quick SetupChoose a location
The projector supports 4 viewing setups. Choose the best one for 
your environment. If you install the projector in a rear or overhead 
position, you’ll need to choose the correct projection option, 
identified below, from the Extended menu. See the User’s Guide 
on your CD-ROM for instructions. 
 
 Table 
  Convenient for temporary front projection.
 
  Choose 
Front from the menu.
 Ceiling 
  Professional installation recommended. 
 
  Choose 
Front /Ceiling from the menu.
 
 Rear 
   
For installation behind a translucent screen. 
Choose Rear from the menu.
 
 Rear/Ceiling 
   Professional installation recommended.   
  Choose 
Rear/Ceiling from the menu.
The distance between the projector and the screen determines  
the size of the image. The diagrams below show approximately  
how big your image will be (diagonally), based on where you set up 
the projector. (For more help determining the size of your image, 
try the Image Size Calculator on the Multimedia Projectors page on 
Epson’s web site.)
2 Connect your video source
Connect the projector to a computer or video source using any of the available 
connections shown below.
 • Check the connectors on your video equipment. If more than one 
    connection is available, choose the one that provides the best quality.
 
    The projector connectors from highest to lowest quality are
 
    Computer (Component Video), S-Video, and Video.
 •   A computer cable is included. You can purchase optional video and 
audio cables through Epson® or an electronics store. 
 •   You can connect up to 3 video devices and use the remote control to 
switch between them. 
	
NOTE		
You	 can	also	 connect	 an	external	 monitor	(to	watch	 the	display	
on	 your	 computer	 monitor	while	watching	 the	projection	 screen),	
and	 a	USB	 cable	 to	use	 the	remote	 control	to	change	 presentation	
slides.	 See	the	
User’s Guide 	on	 your	 CD-ROM	 for	instructions.
3 Set up the remote control
 1  Remove the battery cover.
 2   Insert the batteries. 
 3 Replace the battery cover. 
 
The remote control is ready for use.
Turn over
PowerLite
®
 S5 Series/77c
1 Unpack the projector
 You should have the following items:
ProjectorPower cordComputer cable
User’s Guide 
CD-ROM
Carrying casePassword protect 
sticker
Projector 
remote control
Batteries
RCA video cable  (composite video)(optional)
S-Video  cable(optional)
Component  video to  VGA cable(optional)
Computer  cable  (included)
EPSON
Audio ports
PowerLite S5 Series 
PowerLite 77c
    Add page 4 to Favourites
    image text
    Enable zoom 
    							
5 Adjust the image
 1   To raise the image, stand behind the 
projector, then press the foot release lever  
and lift the front of the projector. Release 
the lever to lock the foot in the position 
you want. 
 2   On the PowerLite S5 Series projector, rotate 
the focus ring to sharpen the image.
 
 
      Press the 
Wide button on the projector to 
enlarge the image, or the Tele button to 
reduce it.
 
 
      On the 
PowerLite 77c, rotate the focus 
ring to sharpen the image, and the zoom 
ring to reduce or enlarge the image.
 
 
 3    If your image looks like  or , first make sure the projector 
is facing the screen squarely. Then, if necessary, press the  and  
buttons on the projector’s control panel until the image is corrected.
 
 4    To select the best color mode, press the  
Color Mode button on the remote control 
repeatedly to move through the options. 
    See your 
User’s Guide on the CD-ROM for more information about  
image adjustments. 
6  Install your User’s Guide 
and register your projector
 1    Insert the PowerLite Projector CD-ROM in your drive. If the installer 
doesn’t open automatically, double-click the Epson CD-ROM icon, 
then double-click the Epson installer icon. 
 2   Choose your projector, then follow the instructions on the screen  
to register.
NOTE	 You	 can	also	 register	 at	www.epson.com/webreg.
 3    After you register the projector, click User’s Guide to install it. 
(If you don’t already have Adobe® Reader,® click Adobe Reader and 
follow the on-screen instructions to install it.) 
  4    When you’re done, click Exit. 
To open your User’s Guide, double-click the PL S5 Series - 77c User’s Guide 
icon on your desktop.
4 Plug in and turn on
 1 Open the A/V Mute slide (lens cover). 
 2   Connect the power cord 
to the projector and plug 
the other end into an 
electrical outlet.
    The
  Power light on the projector turns orange.
 3 Turn on your computer or video source.
 4   Press the  Power button on the projector  
or remote control. The projector beeps, the  
 Power light flashes green, and the projector 
lamp comes on in about 5 seconds. The  
 Power light stays green.
 5   Start your video or presentation. If you have connected more 
than one video source, use the Source Search button on the 
projector or remote control to select the one you want to watch.
NOTE	 	
If	your	 image	 does	not	appear	 on	the	 screen,	 see	the	
Troubleshooting 	section	 for	help.
   Turning off the projector 
 
1  If you’re using a computer, shut it down first, while you can still 
  see the display. 
 2 Press the  Power button on the projector or remote control. 
 3    When you see the confirmation message, press the  Power 
button again. The projector beeps twice and the  Power light 
turns orange.
      With Epson’s Instant Off
® technology, there’s no cool-down 
period. When you’re done, just unplug the projector and it’s 
ready to travel.
 Where to get help
 Internet support
   Visit Epson’s support website at epson.com/support and select your 
product for solutions to common problems. You can download utilities 
and documentation, get FAQs and troubleshooting advice, or e-mail 
Epson with your questions. 
 
Visit http://www.presentersonline.com to access tips, templates, and 
training for developing successful presentations.
 Speak to a support representative
   To use the Epson PrivateLine® Support service, call (800) 637-7661 and 
enter the PIN on the Epson PrivateLine Support card that came with your 
projector. This service is available 6 
AM to 6 PM, Pacific Time, Monday 
through Friday, for the duration of your warranty period. You may also 
speak with a projector support specialist by dialing one of the following 
numbers. (Toll or long distance charges may apply.)
 U.S.: (562) 276-4394, 6 AM to 6 PM, Pacific Time, Monday-Friday 
 Canada: (905) 709-3839, 6 AM to 6 PM, Pacific Time, Monday-Friday
 Purchase supplies and accessories
   You can purchase screens, carrying cases, and other accessories  
from an Epson authorized reseller. To find the nearest reseller, call  
800-GO-EPSON (800-463-7766). Or you can purchase online at  
www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales).
Color Mode 
button
Epson and Instant Off are registered trademarks and Exceed Your Vision is a trademark of Seiko 
Epson Corporation. PowerLite and PrivateLine are registered trademarks and Epson Store is a 
service mark of Epson America, Inc. 
General Notice: Other product names used herein are for identification purposes only and may be 
trademarks of their respective owners. Epson disclaims any and all rights in those marks. 
© 2007 Epson America, Inc. 1/07 
Printed in XXXXXX                   CPD-23268
Zoom ring
Focus ring
Troubleshooting
If you see a blank screen
If you see a blank screen or the No signal message after turning on 
your computer or video source, check the following:
   Make sure the Power light on the projector is green and not 
flashing and the A/V Mute slide (lens cover) is open.
   Make sure the cables are connected correctly. (See the User’s Guide 
for more information.)
   If you’ve connected more than one video source, you may need 
to press the Source Search button on the projector or the remote 
control to select the one you want to watch. (Allow a few seconds 
for the projector to sync up after pressing it.)
If the projector and the notebook don’t display the  
same image 
If you’re using a Windows® notebook:
   Hold down the Fn key and press the function key (such as   
or CRT/LCD) that lets you display on an external monitor. On most 
systems, the  or CRT/LCD key lets you toggle between the 
LCD screen and the projector, or display on both at the same time.
    Check your monitor settings to make sure both the LCD screen 
and the external monitor port are enabled. From the Control 
Panel, open the Display utility. Click the Settings tab, then click 
Advanced. The method for adjusting the settings varies by brand; 
you may need to click a Monitor tab, then make sure the external 
Monitor port is set as your primary display and/or enabled. See 
your computer’s documentation or online help for details. 
If you’re using a Macintosh® notebook with OS X:
1   From the Apple® menu, select System Preferences, then click 
Display or Displays.
2   Select VGA Display or Color LCD, click Arrangement or Arrange, 
and make sure Mirror Displays is checked.
    Add page 5 to Favourites
    image text
    Enable zoom 
    							
5 Adjust the image
 1   To raise the image, stand behind the 
projector, then press the foot release lever  
and lift the front of the projector. Release 
the lever to lock the foot in the position 
you want. 
 2   On the PowerLite S5 Series projector, rotate 
the focus ring to sharpen the image.
 
 
      Press the 
Wide button on the projector to 
enlarge the image, or the Tele button to 
reduce it.
 
 
      On the 
PowerLite 77c, rotate the focus 
ring to sharpen the image, and the zoom 
ring to reduce or enlarge the image.
 
 
 3    If your image looks like  or , first make sure the projector 
is facing the screen squarely. Then, if necessary, press the  and  
buttons on the projector’s control panel until the image is corrected.
 
 4    To select the best color mode, press the  
Color Mode button on the remote control 
repeatedly to move through the options. 
    See your 
User’s Guide on the CD-ROM for more information about  
image adjustments. 
6  Install your User’s Guide 
and register your projector
 1    Insert the PowerLite Projector CD-ROM in your drive. If the installer 
doesn’t open automatically, double-click the Epson CD-ROM icon, 
then double-click the Epson installer icon. 
 2   Choose your projector, then follow the instructions on the screen  
to register.
NOTE	 You	 can	also	 register	 at	www.epson.com/webreg.
 3    After you register the projector, click User’s Guide to install it. 
(If you don’t already have Adobe® Reader,® click Adobe Reader and 
follow the on-screen instructions to install it.) 
  4    When you’re done, click Exit. 
To open your User’s Guide, double-click the PL S5 Series - 77c User’s Guide 
icon on your desktop.
4 Plug in and turn on
 1 Open the A/V Mute slide (lens cover). 
 2   Connect the power cord 
to the projector and plug 
the other end into an 
electrical outlet.
    The
  Power light on the projector turns orange.
 3 Turn on your computer or video source.
 4   Press the  Power button on the projector  
or remote control. The projector beeps, the  
 Power light flashes green, and the projector 
lamp comes on in about 5 seconds. The  
 Power light stays green.
 5   Start your video or presentation. If you have connected more 
than one video source, use the Source Search button on the 
projector or remote control to select the one you want to watch.
NOTE	 	
If	your	 image	 does	not	appear	 on	the	 screen,	 see	the	
Troubleshooting 	section	 for	help.
   Turning off the projector 
 
1  If you’re using a computer, shut it down first, while you can still 
  see the display. 
 2 Press the  Power button on the projector or remote control. 
 3    When you see the confirmation message, press the  Power 
button again. The projector beeps twice and the  Power light 
turns orange.
      With Epson’s Instant Off
® technology, there’s no cool-down 
period. When you’re done, just unplug the projector and it’s 
ready to travel.
 Where to get help
 Internet support
   Visit Epson’s support website at epson.com/support and select your 
product for solutions to common problems. You can download utilities 
and documentation, get FAQs and troubleshooting advice, or e-mail 
Epson with your questions. 
 
Visit http://www.presentersonline.com to access tips, templates, and 
training for developing successful presentations.
 Speak to a support representative
   To use the Epson PrivateLine® Support service, call (800) 637-7661 and 
enter the PIN on the Epson PrivateLine Support card that came with your 
projector. This service is available 6 
AM to 6 PM, Pacific Time, Monday 
through Friday, for the duration of your warranty period. You may also 
speak with a projector support specialist by dialing one of the following 
numbers. (Toll or long distance charges may apply.)
 U.S.: (562) 276-4394, 6 AM to 6 PM, Pacific Time, Monday-Friday 
 Canada: (905) 709-3839, 6 AM to 6 PM, Pacific Time, Monday-Friday
 Purchase supplies and accessories
   You can purchase screens, carrying cases, and other accessories  
from an Epson authorized reseller. To find the nearest reseller, call  
800-GO-EPSON (800-463-7766). Or you can purchase online at  
www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales).
Color Mode 
button
Epson and Instant Off are registered trademarks and Exceed Your Vision is a trademark of Seiko 
Epson Corporation. PowerLite and PrivateLine are registered trademarks and Epson Store is a 
service mark of Epson America, Inc. 
General Notice: Other product names used herein are for identification purposes only and may be 
trademarks of their respective owners. Epson disclaims any and all rights in those marks. 
© 2007 Epson America, Inc. 1/07 
Printed in XXXXXX                   CPD-23268
Zoom ring
Focus ring
Troubleshooting
If you see a blank screen
If you see a blank screen or the No signal message after turning on 
your computer or video source, check the following:
   Make sure the Power light on the projector is green and not 
flashing and the A/V Mute slide (lens cover) is open.
   Make sure the cables are connected correctly. (See the User’s Guide 
for more information.)
   If you’ve connected more than one video source, you may need 
to press the Source Search button on the projector or the remote 
control to select the one you want to watch. (Allow a few seconds 
for the projector to sync up after pressing it.)
If the projector and the notebook don’t display the  
same image 
If you’re using a Windows® notebook:
   Hold down the Fn key and press the function key (such as   
or CRT/LCD) that lets you display on an external monitor. On most 
systems, the  or CRT/LCD key lets you toggle between the 
LCD screen and the projector, or display on both at the same time.
    Check your monitor settings to make sure both the LCD screen 
and the external monitor port are enabled. From the Control 
Panel, open the Display utility. Click the Settings tab, then click 
Advanced. The method for adjusting the settings varies by brand; 
you may need to click a Monitor tab, then make sure the external 
Monitor port is set as your primary display and/or enabled. See 
your computer’s documentation or online help for details. 
If you’re using a Macintosh® notebook with OS X:
1   From the Apple® menu, select System Preferences, then click 
Display or Displays.
2   Select VGA Display or Color LCD, click Arrangement or Arrange, 
and make sure Mirror Displays is checked.
    Add page 6 to Favourites
    image text
    Enable zoom 
    							
5 Adjust the image
 1   To raise the image, stand behind the 
projector, then press the foot release lever  
and lift the front of the projector. Release 
the lever to lock the foot in the position 
you want. 
 2   On the PowerLite S5 Series projector, rotate 
the focus ring to sharpen the image.
 
 
      Press the 
Wide button on the projector to 
enlarge the image, or the Tele button to 
reduce it.
 
 
      On the 
PowerLite 77c, rotate the focus 
ring to sharpen the image, and the zoom 
ring to reduce or enlarge the image.
 
 
 3    If your image looks like  or , first make sure the projector 
is facing the screen squarely. Then, if necessary, press the  and  
buttons on the projector’s control panel until the image is corrected.
 
 4    To select the best color mode, press the  
Color Mode button on the remote control 
repeatedly to move through the options. 
    See your 
User’s Guide on the CD-ROM for more information about  
image adjustments. 
6  Install your User’s Guide 
and register your projector
 1    Insert the PowerLite Projector CD-ROM in your drive. If the installer 
doesn’t open automatically, double-click the Epson CD-ROM icon, 
then double-click the Epson installer icon. 
 2   Choose your projector, then follow the instructions on the screen  
to register.
NOTE	 You	 can	also	 register	 at	www.epson.com/webreg.
 3    After you register the projector, click User’s Guide to install it. 
(If you don’t already have Adobe® Reader,® click Adobe Reader and 
follow the on-screen instructions to install it.) 
  4    When you’re done, click Exit. 
To open your User’s Guide, double-click the PL S5 Series - 77c User’s Guide 
icon on your desktop.
4 Plug in and turn on
 1 Open the A/V Mute slide (lens cover). 
 2   Connect the power cord 
to the projector and plug 
the other end into an 
electrical outlet.
    The
  Power light on the projector turns orange.
 3 Turn on your computer or video source.
 4   Press the  Power button on the projector  
or remote control. The projector beeps, the  
 Power light flashes green, and the projector 
lamp comes on in about 5 seconds. The  
 Power light stays green.
 5   Start your video or presentation. If you have connected more 
than one video source, use the Source Search button on the 
projector or remote control to select the one you want to watch.
NOTE	 	
If	your	 image	 does	not	appear	 on	the	 screen,	 see	the	
Troubleshooting 	section	 for	help.
   Turning off the projector 
 
1  If you’re using a computer, shut it down first, while you can still 
  see the display. 
 2 Press the  Power button on the projector or remote control. 
 3    When you see the confirmation message, press the  Power 
button again. The projector beeps twice and the  Power light 
turns orange.
      With Epson’s Instant Off
® technology, there’s no cool-down 
period. When you’re done, just unplug the projector and it’s 
ready to travel.
 Where to get help
 Internet support
   Visit Epson’s support website at epson.com/support and select your 
product for solutions to common problems. You can download utilities 
and documentation, get FAQs and troubleshooting advice, or e-mail 
Epson with your questions. 
 
Visit http://www.presentersonline.com to access tips, templates, and 
training for developing successful presentations.
 Speak to a support representative
   To use the Epson PrivateLine® Support service, call (800) 637-7661 and 
enter the PIN on the Epson PrivateLine Support card that came with your 
projector. This service is available 6 
AM to 6 PM, Pacific Time, Monday 
through Friday, for the duration of your warranty period. You may also 
speak with a projector support specialist by dialing one of the following 
numbers. (Toll or long distance charges may apply.)
 U.S.: (562) 276-4394, 6 AM to 6 PM, Pacific Time, Monday-Friday 
 Canada: (905) 709-3839, 6 AM to 6 PM, Pacific Time, Monday-Friday
 Purchase supplies and accessories
   You can purchase screens, carrying cases, and other accessories  
from an Epson authorized reseller. To find the nearest reseller, call  
800-GO-EPSON (800-463-7766). Or you can purchase online at  
www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales).
Color Mode 
button
Epson and Instant Off are registered trademarks and Exceed Your Vision is a trademark of Seiko 
Epson Corporation. PowerLite and PrivateLine are registered trademarks and Epson Store is a 
service mark of Epson America, Inc. 
General Notice: Other product names used herein are for identification purposes only and may be 
trademarks of their respective owners. Epson disclaims any and all rights in those marks. 
© 2007 Epson America, Inc. 1/07 
Printed in XXXXXX                   CPD-23268
Zoom ring
Focus ring
Troubleshooting
If you see a blank screen
If you see a blank screen or the No signal message after turning on 
your computer or video source, check the following:
   Make sure the Power light on the projector is green and not 
flashing and the A/V Mute slide (lens cover) is open.
   Make sure the cables are connected correctly. (See the User’s Guide 
for more information.)
   If you’ve connected more than one video source, you may need 
to press the Source Search button on the projector or the remote 
control to select the one you want to watch. (Allow a few seconds 
for the projector to sync up after pressing it.)
If the projector and the notebook don’t display the  
same image 
If you’re using a Windows® notebook:
   Hold down the Fn key and press the function key (such as   
or CRT/LCD) that lets you display on an external monitor. On most 
systems, the  or CRT/LCD key lets you toggle between the 
LCD screen and the projector, or display on both at the same time.
    Check your monitor settings to make sure both the LCD screen 
and the external monitor port are enabled. From the Control 
Panel, open the Display utility. Click the Settings tab, then click 
Advanced. The method for adjusting the settings varies by brand; 
you may need to click a Monitor tab, then make sure the external 
Monitor port is set as your primary display and/or enabled. See 
your computer’s documentation or online help for details. 
If you’re using a Macintosh® notebook with OS X:
1   From the Apple® menu, select System Preferences, then click 
Display or Displays.
2   Select VGA Display or Color LCD, click Arrangement or Arrange, 
and make sure Mirror Displays is checked.
    All Epson manuals Comments (0)

    Related Manuals for Epson Powerlite 77c Quick Setup Manual