Epson Powerlite 760c Multimedia Projector Users Guide

Connecting to Computers and Other Equipment41
Connecting an S-Video Source 
1. Locate an S-Video cable (one is usually provided with your video 
equipment or you can purchase one from Epson; see page 10). 
2. Connect the cable to the S-Video connector on your player and 
the 
S-Video connector on the projector:
3. If you want to play sound through the projector, see page 44 for 
instructions on connecting audio cables.
4. If you don’t need to make any other connections, see page 16 or 
the Quick Setup...

42Connecting to Computers and Other Equipment
Connecting a Component Video Source
You will need a component-to-VGA video cable or a component 
video-to-VGA adapter for this connection. You can order this cable 
(ELPKC19) from Epson; see page 11 for more information.
1. Locate a component-to-VGA video cable or adapter. 
2. Connect the cable to your player and the blue 
Computer/Component Video connector on the projector. 
3. If you want to play sound through the projector, see page 44 for 
instructions on...

Connecting to Computers and Other Equipment43
Connecting an RGB Video Source
1. Locate the VGA computer cable provided with the projector. 
2. Connect the cable to the video port on your player and 
the 
Computer/Component port on the projector.
3. If you want to play sound through the projector, see page 44 for 
instructions on connecting audio cables.
4. If you don’t need to make any other connections, see page 16 for 
instructions on turning on the projector and adjusting the image. 
Once the...

44Connecting to Computers and Other Equipment
Playing Sound Through the Projector
You can play sound through the projector’s speaker system.
To play sound through the projector, follow these steps:
1. Locate the appropriate cable and connect it to the 
Audio jack on 
the projector.
■If you have a computer connected to the blue Computer/
Component Video 
port, use a stereo mini-jack cable.
■If you have video equipment connected to the Video or 
S-Video port, use an RCA-style audio cable and the audio...

45
1
Fine-Tuning the Projector
You can use the projector’s on-screen menus to adjust the image, 
sound, and other features. This chapter covers the following 
information: 
■Using the menu system
■Adjusting the image
■Adjusting signal settings
■Customizing projector features
■Using the projector security features
■Customizing power and operation
Montreal Users Guide.book  Page 45  Tuesday, April 19, 2005  11:27 AM 

46Fine-Tuning the Projector
Using the Menu System
You can use the remote control or the projector’s control panel to 
access the menus and change settings. Follow these steps:
1. To display the menu screen, press the 
Menu button on the 
remote control or on the projector.  
You see a menu screen similar to the one below:
The menus are listed on the left and the options available for the 
highlighted menu are shown on the right.
2. Use the  pointer button on the remote control (or the arrow 
buttons on...

Fine-Tuning the Projector47
4. After highlighting the option you want to adjust, use the 
pointer button to change the setting. In some cases, you may 
have to press the 
Enter button to view a sub-screen for changing 
the setting. 
■Press the left or right side of the  pointer button to adjust
a slider bar.
■To select from two or more settings, use the  pointer 
button to highlight the desired setting and press 
Enter. 
5. After changing the settings, press the 
Esc button to save your 
changes and...

48Fine-Tuning the Projector
Adjusting the Image 
You can use the Image menu to adjust the brightness, sharpness, color, 
tint, and contrast. 
1. Press the 
Menu button on the projector or remote control and 
select the 
Image menu. You see the Image menu screen. 
2. Use the  pointer button to highlight the desired option, then 
adjust it as needed:
■Color Mode
Lets you quickly adjust the color and brightness for various 
environments. Use either the remote control or the 
Color 
Mode
 setting in the...

Fine-Tuning the Projector49
■Brightness 
Lightens or darkens the overall image.
■Contrast
Adjusts the difference between light and dark areas. 
■Color Intensity (video only)
Adjusts the color depth of the image.
■Tint (video only)
Adjusts the balance of green to magenta in the image 
(available only for component video or NTSC signals).
■Sharpness
Adjusts the sharpness of the image.
■Color Adjustment
Adjusts the color temperature. Select Color Temp. to set a 
temperature between 5000 and 10000 °K. Or...

50Fine-Tuning the Projector2. Use the  pointer button to highlight the desired option, then 
adjust it as needed:
■Auto Setup 
Leave this setting 
ON to automatically optimize the computer 
image. Turn it off if you want to save adjustments you have 
made to the video settings.
■Tracking 
Adjust this value to eliminate vertical stripes in the image.
■Sync
Adjust this value if the image appears blurry or flickers.
■Progressive
Turn this setting ON to convert composite video signals into 
progressive...