Epson Powerlite 7600p Multimedia Projector Users Guide

Fine-tuning the Projector45
Adjusting the Image
The Video menu lets you make adjustments to the projected image. 
The options available in the menu depend on which source is 
connected to the projector: standard computer video, DVI (digital) 
computer video, composite or S-Video, or component video.
 
Position
Tracking
Sync.
Brightness
Contrast
Sharpness
Gamma
Resolution
Preset
ResetAdjustment
Select
Execute :
:
:
:
:
:
:9999
99
0
0
0 Video
Audio
Effect
Setting
Users Logo
Advanced
About
Reset All
Auto...

46Fine-tuning the Projector
Repositioning the Image
Follow these steps to move the image to a different position:
1. Press the 
Menu button. You see the menu screen.
2. Press 
Enter to select the Video menu. 
3. Press 
Enter to select the Position 
option. You see the following on the 
right side of the screen:
4. Use the arrow buttons (control panel) 
or the 
Enter button (remote control) to 
move the image left, right, up, or down.
5. When the image is positioned the way you want, press 
Esc to exit...

Fine-tuning the Projector47

Tint (video only)
Adjusts the balance of green to magenta in the image.

Sharpness
Adjusts the sharpness of the image.

Gamma
Choose Dynamic for computer images with bright colors 
(such as charts or graphs), or 
Natural to enhance video 
images. 

Resolution (computer images only)
Leave this setting at Auto to allow the projector to detect the 
video signal automatically. If the projector is unable to sync 
up with the computer, select 
Manual and choose one of the...

48Fine-tuning the Projector4. Use the down arrow (control panel) or 
Enter button (remote 
control) to select the number to which you want to assign the 
current settings. 
5. Press 
Enter. When you see the “Overwrite?” prompt, select Yes 
and press 
Enter.
6. Press 
Esc to exit the menu system.
When you want to use a saved setting, press the 
Preset button on the 
remote control. You see the setting number displayed in yellow at the 
top right of the screen. 
To select another number, press the 
Preset...

Fine-tuning the Projector49
4. Use the arrow buttons (control panel) or the Enter button 
(remote control) to set the following options:

Volume

Treble

Bass
5. When you’re finished adjusting the sound, press 
Esc or Menu.
Customizing the Highlighting Tools
The highlighting tools let you add pointers and other types of 
annotations to your image, as described on pages 37 to 39. You can 
use the Effect menu to customize these tools and set the cursor speed 
for highlighting. The 
Reset option lets you...

50Fine-tuning the Projector4. Use the arrow buttons (control panel) or the 
Enter button to 
customize:

Cursor/Stamp
Lets you define the shape and size for three different pointers. 
For some pointers, you can also define the color and length.

Box
Lets you define the box color and choose from a solid or 
outline box, with rounded or square corners.

Spotlight
Lets you choose a large, medium, or small spotlight.

Bar
Lets you define three different bars. For each one, you can set 
the color and width,...

Fine-tuning the Projector51
Creating Your Own Startup Screen
You can transfer any image from your computer or video source to the 
projector, and then use it as your startup screen. You can also use it as 
the screen displayed when the projector is not receiving a signal or 
when you press the 
A/V Mute button. The image can be a company 
logo, slogan, photograph, or any other image you want to use.
Capturing the Image
Start by displaying the image you want to use. It can be an image from 
either a...

52Fine-tuning the ProjectorYou see the screen shown at the left.
6. Use the arrow buttons on the control panel or the 
Enter button 
on the remote control to select a zoom rate (display size), and then 
press 
Enter. 
7. When the message “Do you save the user’s logo?” appears, select 
Yes and press Enter. 
Saving the logo may take a few moments. Do not use your 
projector or video source (computer, DVD player, etc.) while the 
logo is being saved.
8. When you see the message “Saving the user’s logo is...

Fine-tuning the Projector53
Customizing Projector Features
You can use the Setting menu to disable the projector’s sleep mode, 
adjust the image shape, and customize several other features.
1. Press the 
Menu button. 
2. Use the arrow keys (control panel) or the 
Enter button (remote 
control) to highlight 
Setting. You see the options and their 
settings on the right side:
3. Press 
Enter to select the Setting menu. 
4. Use the arrow buttons (control panel) or the 
Enter button 
(remote control) to set...

54Fine-tuning the Projector

A/V Mute
Selects the screen color or image to display when you press 
the 
A/V Mute button. The logo setting displays an image that 
you have transferred to the projector (see page 51).

BNC
Specifies the format for input to the Computer 2/
Component Video
 port. If the source is a computer, select 
RGB.
 If the source is a video device, select YCbCr or YPbPr.

Sleep mode
When sleep mode is on, the projector turns off the lamp if it 
has not received any input signals for 30...