Epson Powerlite 7550c Users Guide

3    Adjusting Projector Settings             68
p
The Effect menu lets you modify the appearance of the default 
special effects assigned to the Effects buttons on the remote 
control. (To assign different functions to the buttons, you need 
the optional ELP Link III software. See “Assigning Functions to 
the Effects Buttons” on page 102 for more information.)
p
The About menu displays basic information about the projector, 
such as the number of hours the lamp has been used or the video 
signal being...

Accessing the Main Menu
69
Accessing the Main Menu
To display the Main menu, press the Menu button on the control 
panel or the remote control. The Main menu appears:
Press the Menu button again to hide the menu.  

3    Adjusting Projector Settings             70
Changing a Menu Setting
To change a menu setting: 
1. Press the Menu button on the control panel or remote control to 
display the Main menu. 
2. Press the up or down arrows (control panel) or press up or down 
on the pointer button (remote) to scroll through the menu 
choices. 
As you select a menu, a submenu of options appears to the right. 
The options available in some submenus vary, depending on 
whether the current image source is the computer or a...

Changing a Menu Setting
71
3. Press either the Enter 
 button (control panel) or the top or 
bottom multi-purpose button (remote) to move to a submenu 
list.
The following screen display shows the options for the Video 
menu when the image source is the computer.
4. Press the up or down arrows (control panel) or press up or down 
on the pointer button (remote) to scroll through the submenu 
options.
5. Press either the left or right arrow buttons (control panel) or 
press right or left on the pointer...

3    Adjusting Projector Settings             72
Adjusting Video Settings (Image Source = Computer) 
You can adjust the projected image by using the Video menu. The 
following options are available when the image source is Computer.
Note: The computer must be connected and operating, and the 
image source on the projector must be set to Computer for you to 
access these menu options. To change the image source on the 
projector, press the Source button on the remote control or control 
panel. Menu item...

Adjusting Video Settings (Image Source = Computer)
73
Color Adjusts the color balance of the input source.
Select this item by pressing the Enter
 
 button (control panel) or press 
either multi-purpose button on the remote. The projector enters color 
adjustment mode. Use the pointer button (remote) or up and down 
buttons (control panel) to select a color. 
Next, use the pointer button (remote) or left and right buttons (control 
panel) to adjust the selected color. Increase the setting for more...

3    Adjusting Projector Settings             74
Adjusting Video Settings (Image Source = Video) 
You can adjust the projected image by using the Video menu. The 
following options are available when the image source is Video.
Note: The projector’s image source must be set to Video, and the 
video source (such as a VCR or camcorder) must be connected and 
operating for you to access these menu options (for example, the 
projector must actually be projecting an image from a video tape, if 
you’re using a...

Adjusting Audio Settings
75
Adjusting Audio Settings
You can use the Audio menu to adjust the settings shown in the 
following table. Reset Returns all menu items to their factory defaults.
Select this item and then press the Enter
 
 button (control panel) or a 
multi-purpose button (remote) to display the confirmation screen. Next, 
select Yes and then press a multi-purpose button (remote) or the Enter
 
 button (control panel) to reset the Video Menu.
If you change your mind, select No and then press...

3    Adjusting Projector Settings             76
Changing Basic Projector Settings
You can adjust basic projector settings by using the Setting menu.SRS 
CENTERAdjusts stereo sound. Use this setting to balance the stereo sound.
Reset Returns all menu items to their factory defaults.
Select this item and then press the Enter
 
 button (control panel) or a 
multi-purpose button (remote) to display the confirmation screen. Next, 
select Yes and then press a multi-
purpose button (remote) or the Enter...

Changing Basic Projector Settings
77
Ceiling  Flips the projected image so it looks correct when you’re hanging the 
projector upside-down from the ceiling. Selecting ON turns this 
feature on, while OFF turns it off (for a normal image).
Rear Projection Mirrors the projected image so it looks correct when you’re projecting 
from behind onto a translucent screen. Selecting ON turns mirroring 
on, while OFF turns it off (for a normal image). 
Blank
(AV/Mute)Specifies whether a black screen, a blue screen,...