Epson Powerlite 7500c Multimedia Projector Users Guide

User’s Logo Menu
71
Assigning the Logo to the AV/Mute Button
Follow these steps to assign the logo to the AV/Mute button:
1. Press the Menu button to open the Menu window.
2. Select the Setting menu and press the Enter button.
3. Select the Blank (AV/Mute) option, then highlight Logo.
4. Press the Menu button twice.
Now you can press the AV/Mute button on the control panel or the 
remote control to display the user logo.  
 
5500.book  Page 71  Wednesday, August 4, 1999  4:41 PM 

3    Using the Projector Menus             72
Effect Menu
Use the Effect menu to modify what happens when you use the 
Effects buttons on the remote control and to change the cursor 
speed. 
If you have the optional ELP Link III software, you can reconfigure 
the Effects button with different functions. See “Customizing the 
Remote Control Effects Buttons” on page 91 for more information.Item Description
Pointer Set the pointer icon and size.
Box Set the box color.
Line Set the color and width.
Marker...

About Menu
73
About Menu
The About menu displays information about your projector.
When the image source is Computer:
When the image source is Video:Item Description
Frequency Displays the frequency of the computer.
Resolution Displays the output resolution of the computer video output.
Refresh Rate Displays the refresh rate of the computer video output.
Lamp  Displays the number of hours the current lamp has been used. The lamp 
light turns red when the projector lamp is near the end of its normal life....

3    Using the Projector Menus             74
Reset All Menu
Selecting the Reset All menu option resets the settings in all menus 
to their factory defaults. It does not change or delete any user logo 
you may have stored.
You will be prompted to confirm the reset action. Select Yes or No, 
then press the top or bottom multi-purpose button (remote) or the 
Enter button (control panel) to reset all the settings.
5500.book  Page 74  Wednesday, August 4, 1999  4:41 PM 

75
4Using the ELP Link III Software
T
he optional ELP Link III set contains the ELP Link III software 
and cables used to control the projector from your computer or to 
program special effects on the remote control. The set includes:
 Main cable
 
9-pin serial cable (PC set)
5500.book  Page 75  Wednesday, August 4, 1999  4:41 PM 

4    Using the ELP Link III Software             76
 
PS/2 mouse cable (PC set)* 
 
Serial mouse cable (PC set)
 
Serial cable (Mac set)
 
Mouse cable (Mac set)*
 
ELP Link III software on CD-ROM
(PC or Mac)
* Note that these mouse cables are different from the cables 
included with
your projector.
5500.book  Page 76  Wednesday, August 4, 1999  4:41 PM 

Connecting the ELP Link III Cables
77
The ELP Link III software can be used with the following operating 
systems:
Windows 3.x

Windows 95

Windows 98

Windows NT 4.0

Macintosh OS System 7.x and OS System 8.x
If you purchased the ELP Link III set, follow the instructions in this 
chapter to connect the cables and install and use the software.
Connecting the ELP Link III Cables
Once you have connected the projector video cable, monitor cable 
and audio cable (if needed) as described in Chapter 1,...

4    Using the ELP Link III Software             78
Connecting to a PC Desktop Computer
The main cable included in your ELP Link III set connects the PS/2 
mouse cable (needed to use the remote control as a mouse) and 
9-pin serial cable (needed to use the ELP Link III software and the 
Effects buttons on the remote control) from your computer to the 
projector. 
1. If you connected the PS/2 mouse cable included with the 
projector as described on page 22, disconnect it from the 
computer and the...

Connecting the ELP Link III Cables
79
3. Connect the 9-pin end of the PS/2 mouse cable included with 
the ELP Link III set to the MOUSE terminal on the square end 
of the main cable.
4. If your computer’s mouse cable is still connected to your 
computer, disconnect it. Then connect the other end of the PS/2 
mouse cable included with the ELP Link III set to your 
computer’s mouse port.
Note: If your system uses a serial mouse, perform steps 3 and 4 
using the serial mouse cable instead of the PS/2 mouse...

4    Using the ELP Link III Software             80
Connecting to a PC Laptop Computer 
The main cable included in your ELP Link III set connects the PS/2 
mouse cable (needed to use the remote control as a mouse) and 
9-pin serial cable (needed to use the ELP Link III software and the 
Effects buttons on the remote control) to the projector.   
1. If you connected the PS/2 mouse cable included with the 
projector as described on page 25, disconnect it from the laptop 
and the projector.
2. Connect the...