Epson Powerlite 7300 Users Guide
Here you can view all the pages of manual Epson Powerlite 7300 Users Guide. The Epson manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 31
Connecting to a Computer 23 1. Connect the small end of the main cable to the projector’s Mouse/Com 1 port. (Use the Mouse/Com 2 port if you are connecting a second computer.) 2. To use the remote control as a wireless mouse, connect the 9-pin end of the PS/2 mouse cable included with the projector to the MOUSE terminal on the square end of the main cable. 3. Disconnect your mouse from the mouse port on the back of your computer and replace it with the other end of the PS/2 mouse cable included...
Page 32
1 • Setting Up the Projector 24 4. To use the ELP Link III software or to use the Effects buttons on the remote control, connect one end of the serial cable to the SERIAL terminal on the square end of the main cable. Connect the other end of the serial cable to the serial port on the back of your computer. Note: You will not be able to use ELP Link III software if your system has only one serial port that is being used to support a serial mouse. 5. Tighten the screws on all...
Page 33
Connecting to a Computer 25 Connecting the Audio Cable 1. If you will be using audio, connect one end of the audio cable to the Audio 1 jack on the projector. (Use the Audio 2 jack if you are connecting a second computer.) 2. Connect the other end of the audio cable to the speaker or audio out port on the computer’s sound card. audio cable Audio 1 jack 5300.book Page 25 Tuesday, April 13, 1999 4:19 PM
Page 34
1 • Setting Up the Projector 26 Connecting to a PC Laptop Computer To connect the projector to your PC laptop computer, you need to:l Connect the projector video cable l Connect the mouse and/or serial cable (if you want to use the remote control as a mouse or use the ELP Link III software) l Connect the audio cable (if you’ll be projecting with audio) Follow the steps in each section for the cables you need to connect. Before beginning, turn off the projector and computer if they are...
Page 35
Connecting to a Computer 27 2. Connect the other end of the video cable to the laptop’s video (monitor) port. 3. Tighten the screws on all connectors. Connecting the Mouse and Serial Cables If you want to use the remote control as a mouse or use the ELP Link III software, you need to connect the main cable. It provides connectors for:l The PS/2 mouse cable (to use the remote control as a mouse) l The serial cable (to use the ELP Link III software and the Effects buttons on the remote control) Refer...
Page 36
1 • Setting Up the Projector 28 1. Connect the small end of the main cable to the projector’s Mouse/Com 1 port. (Use the Mouse/Com 2 port if you are connecting a second computer.) 2. To use the remote control as a wireless mouse, connect the 9-pin end of the PS/2 mouse cable included with the projector to the MOUSE terminal on the square end of the main cable. 3. Connect the 6-pin (mini-DIN) end of the PS/2 mouse cable to the external mouse port on your laptop. Note: If your laptop...
Page 37
Connecting to a Computer 29 4. To use the ELP Link III software or to use the Effects buttons on the remote control, connect one end of the serial cable to the SERIAL terminal on the square end of the main cable. 5. Connect the other end of the serial cable to the serial port on the back of your computer. Note: You will not be able to use ELP Link III software if your laptop has only one serial port that is being used to support a serial mouse. 6. Configure your laptop to work with an external...
Page 38
1 • Setting Up the Projector 30 Connecting the Audio Cable 1. If you will be using audio, connect one end of the audio cable to the Audio 1 jack on the projector. (Use the Audio 2 jack if you are connecting a second computer.) 2. Connect the other end of the audio cable to your laptop. audio cable Audio 1 jack 5300.book Page 30 Tuesday, April 13, 1999 4:19 PM
Page 39
Connecting to a Computer 31 Connecting to a Desktop Macintosh To connect the projector to your desktop Macintosh, you need to:l Connect the projector video cable and computer monitor cable l Connect the mouse and/or serial cable (if you want to use the remote control as a mouse or use the ELP Link III software) l Connect the audio cable (if you’ll be projecting with audio) Follow the steps in each section for the cables you need to connect. Before beginning, turn off the projector and computer if they...
Page 40
1 • Setting Up the Projector 32 Connecting the Video and Monitor Cables First connect the video and monitor cables. Refer to this illustration as you follow the steps below. Mac Computer 1 port Computer Out port Macintosh desktop adapter Macintosh monitor adapterMacintosh monitor cable projector video cable 5300.book Page 32 Tuesday, April 13, 1999 4:19 PM