Epson Powerlite 7250 Users Guide

Effect Menu
93
Effect Menu 
The Effect menu lets you modify the effects assigned to the remote 
control Effects buttons.
Setting Menu 
The Setting menu allows you to set or adjust various projector options.
Menu item Description
Cursor/Stamp  Selects the stamp you want to use as the cursor graphic and a zoom 
rate.
Box Selects a box color.
Marker Selects the free line color and width.
Cursor Speed Adjusts the cursor speed to Low, Middle, or High.
Reset Returns all Effect menu items to their initial...

3    Using the Projector Menus             94
User’s Logo Menu 
The User’s Logo menu allows you to capture and save a custom logo 
which can be used as a splash screen or with the A/V Mute button.
Message Specifies whether a black screen, a blue screen, or a user logo 
displays when the screen is blanked. 
Prompt Displays a temporary message (computer or video) identifying the 
image source.
A/V Mute Displays a blue, black, or user logo screen when the audio/video is 
turned off.
BNC  Specifies the...

User’s Logo Menu
95
Capturing and Saving a Logo
Follow these steps to capture and save a logo:
1. Display the image (with the projector).
2. Press the Menu button on the control panel or remote control to 
display the Main menu. 
3. Press the down arrow (control panel) or press down on the Enter 
button (remote control) to move to the User’s Logo option.
4. Press Enter (control panel or remote control) to display the User’s 
Logo Setting window with the message “Do you use the present 
image as a user...

3    Using the Projector Menus             96
9. When the message “Do you save this user logo?” appears, select 
Yes and then press Enter (control panel or remote control). If 
you do not want to save the logo, select No.
Note: Saving the logo may take a few moments. Do not use the 
projector or other sources (computer, video, speaker, etc.) while the 
logo is being saved.
10. When you see the message “Saving the user logo is completed,” 
press the Menu or Enter button to redisplay the Main menu....

Reset All Menu
97
Reset All Menu
The Reset All menu lets you return all the projector settings to their 
default values. Select Reset All and press the Enter button on the 
control button or remote control to display the confirmation screen. 
Select Yes to reset all the default settings or No to cancel.
Advanced Menu 
The Advanced menu lets you set additional projector options.
Menu item Description
Language Selects the language to be used in the menus: English, Japanese, 
French, German, Italian,...

3    Using the Projector Menus             98
Ceiling  Mirrors the projected image on its X-axis (top-bottom). Selecting ON 
turns mirroring on, while OFF turns it off (for a normal image). Turn 
this option on when the projector is mounted upside-down from the 
ceiling.
Mouse/Com Locks and unlocks the Mouse/Com port.
Select 1 to assign the wireless mouse control to the computer 
connected to the Mouse/Com 1 port only.
Select 2 to assign the wireless mouse control to the computer 
connected to the...

About Menu (Image Source = Computer)
99
About Menu (Image Source = Computer) 
When the image source is a computer, the About menu displays 
information about the projector’s horizontal and vertical frequency, 
lamp hours, and computer connection.
About Menu (Image Source = Video)
When the image source is video, the About menu displays information 
about the projector’s lamp hours and video signal. 
Menu item Description
Lamp  Displays the number of hours the current lamp has been used.
Frequency Displays...

3    Using the Projector Menus             100 

101
4
Using ELP Link IV 
The ELP Link IV software is a utility you can run from your desktop 
or laptop computer to control projector features and draw special 
graphics on your screen. You can also use the software to reconfigure 
the special effects buttons on the remote control. This chapter 
describes how to:
❐Install the software
❐Start ELP Link IV
❐Customize the remote control Effects buttons
❐Control standard and special projector features 

4    Using ELP Link IV
            102
Installing the Software
ELP Link IV software can be used with the following operating 
systems:
❐Windows 3.1
❐Windows 95 or 98
❐Windows NT 3.51 or 4.0
❐Macintosh OS System 7.5 and OS System 8.x. 
Connecting Needed Cables
Before installing the software, make sure the projector is properly 
connected to your computer. See Chapter 1 for instructions on 
installing the main and serial cables needed to use the ELP Link IV 
software.
Installing the Software for Windows...