Epson Powerlite 700c Multimedia Projector Users Guide

48Fine-Tuning Your Projector6. If you want to go back to the default settings on any menu, 
select 
Reset, press Enter, select Yes, and then press Enter.
7. Press the 
Esc button on the remote to go back to the main 
menu display. Your changes are saved automatically.
8. Press the 
Menu button to exit the menu system.
Adjusting the Image
You can adjust a number of image features with the Video 
menu, including:
nImage positioning
nBrightness
nContrast
nColor Balance
nSharpness
nGamma 
Additional settings...

Fine-Tuning Your Projector49
3. Press Enter to select the Position 
option. You see the following on 
the right side of the screen:
4. Tilt the 
Enter button in the 
direction you want to move the 
image: left, right, up, or down.
5. When the image is positioned the way you want, press 
Esc.
Adjusting Image Appearance
Follow these steps to adjust the brightness, contrast, sharpness, 
or gamma:
1. Press the 
Menu button. You see the main menu listing, 
with the Video menu highlighted.
2. Press 
Enter to...

50Fine-Tuning Your Projector3. Press the bottom edge of the 
Enter button (or tilt it down) 
repeatedly until 
Color is highlighted.
4. Press 
Enter to select Color Adjustment. You see the 
following:
5. Press the right side of the 
Enter button to increase the 
amount of 
R (red) in the image or the left side to decrease 
it. You see the effect of your changes on the screen. 
6. Press the bottom edge of the 
Enter button (or tilt it down) 
to select the 
G (green) or B (blue) setting.
7. Press the right...

Fine-Tuning Your Projector51
You see the following:
3. Press 
Enter to select the Audio menu.
4. Press the right side of the 
Enter button to increase the 
volume or the left side to decrease it. This works the same 
as the 
Volume button on the remote control.
5. To select the Tone setting, press the bottom edge of the 
Enter button (or tilt it down).
6. Press the right side of the 
Enter button to increase the 
treble or the left side to increase the bass. 
When you’re finished adjusting the sound,...

52Fine-Tuning Your Projector
Customizing the Cursor/Stamp
You can change the cursor/stamp from a yellow arrow to a 
different type of arrow, a ball, a pointing hand, or a cross.
1. Press the 
Menu button. You see the main menu listing, 
with the Video menu highlighted.
2. Press the bottom edge of the 
Enter button (or tilt it down) 
to highlight 
Effect. You see the Effect menu:
3. Press 
Enter to select the Effect menu. The Cursor/Stamp 
Setting is highlighted.
4. Press
 Enter to select Cursor/Stamp...

Fine-Tuning Your Projector53
6. If you want to enlarge the cursor/stamp icon, press the 
bottom edge of the 
Enter button (or tilt it down) to 
highlight Zoom Rate. Then press the right side of the 
Enter button to select 200%.
7. When you’re finished customizing the cursor/stamp tool, 
press 
Esc.
Customizing the Box, Line and Marker 
Tools
You can change the color and line width for the line drawing 
tools, and also change the shape of the box tool. 
1. Press the 
Menu button. You see the main menu...

54Fine-Tuning Your Projector8. Press the right or left edge of the 
Enter button to choose 
the box shape (round or square corners), or the line width 
(from 2 to 32 pixels for the marker and 2 to 148 pixels for 
the freehand line).
9. When you’re finished customizing the drawing tool, press 
Esc.
You can select another drawing tool to customize or press 
Esc again to return to the main menu.
Customizing Projector Features
You can use the Setting menu to turn on the projector’s power 
management system,...

Fine-Tuning Your Projector55
4. Press the bottom edge of the Enter button (or tilt it down) 
repeatedly to select one of the following options:
nP-in-P
Changes from a composite (standard) video source to 
an S-video source for the picture-in-picture display. 
nNo-Signal Msg
Selects the screen color and message to display when 
the projector is not receiving a signal. The logo setting 
displays an image that you have transferred to the 
projector. See page 56 for instructions on transferring 
an image to...

56Fine-Tuning Your Projector
Creating Your Own Startup Screen
You can transfer any image on your computer to the projector, 
and then use it as the screen displayed when the projector is not 
receiving a signal. You can also set it to be displayed when you 
press the 
A/V Mute button on the remote, or as a startup 
screen. The image can be a company logo, slogan, photograph, 
or any other image you want to use.
Capturing the Image
You start by displaying the image you want to use on the 
projector. You...

Fine-Tuning Your Projector57
Saving the logo may take a few moments. Do not use the 
projector or other sources (computer, video, speaker, etc.) 
while the logo is being saved.
9. When you see the message “Saving the user logo is 
completed,” press the 
Menu or Enter button to redisplay 
the main menu.
Assigning the Image to the No-Signal 
Message and/or A/V Mute Button
After your image is saved, you can set it up as the no-signal 
message and/or the screen that’s displayed when you press the 
A/V Mute...