Epson Powerlite 7000xb Specifications

							EPSON PowerLite 7000XB Multimedia Projector
1/2/98PowerLite 7000XB Multimedia Projector - 1
Projector Specifications 
General
Type of display Poly-silicon liquid crystal panel, 
Thin FilmTransistor (TFT)
Brightness 650 ANSI lumens
Contrast ratio 300:1
Size of liquid 
crystal panels 1.32 inches (33.6 mm)
Resolution 1024 (horizontal) 
´ 768 (vertical) pixels
Image size 23 to 300 inches (0.6 to 7 meters)
Color 
reproduction 24 bit; 16.7 million colors
Projection 
distance 3.38 to 32.8 feet (1 to 10 meters)
Projection lens Focus and manual zoom controls
Projection 
method Front, rear, and upside-down projection
Tilt angle Adjustable (0° to 15°)
Remote control 
range 33 feet (10 meters)
Internal speaker 
system 2 
´ 2 W  3D stereo
Optical aspect 
ratio 4 
´ 3 (horizontal ´ vertical)
Zoom ratio 1:1.3
Video interface
standards NTSC, PAL, SECAMProjector lamp
Type Ultra High Efficiency (UHE)
Power 150 W
Part number ELPLP04
Mechanical
Height 6.3 inches (159 mm)
Width 9.7 inches (245 mm)
Depth 15.0 inches (380 mm) with lens 
Weight 14.7 lb (6.7 kg)
Electrical
Voltage 100 to 120 VAC and 200 to 240 VAC
Rated frequency 50/60 Hz
Power supply  100 to 120 VAC, 2.9 A, 50/60 Hz
200 to 240 VAC, 1.8 A, 50/60 Hz
Power 
consumption 260 W (operating)
30 W (standby)
Environmental
Temperature Operation: 41 to 104° F (5 to 40° C),
non-condensing
Storage: 14 to 140° F (–10 to 60° C),
non-condensing
Humidity Operation: 20 to 80% RH, 
non-condensing
Storage: 10 to 90% RH, 
non-condensing
focus ring
zoom ring
foot release 
lever foot
remote control 
receivercontrol paneloperational status 
in dicators
remote contro
lreceiver 
						

							EPSON PowerLite 7000XB Multimedia Projector
2 - PowerLite 7000XB Multimedia Projector1/2/98 Supported monitor resolutions
The projector displays images at a resolution of 1024 
´ 768 
pixels. To display a higher resolution image, the projector 
compresses it to 1024
´768. The following table lists the 
display formats supported by the projector:
Note: The frequencies of some computers may not allow the image 
to be displayed correctly.
Note: This projector is compatible with DDC-capable graphic 
sub-systems and boards only. 
* The projector uses a patent-pending technology to resize the 
image to 1024 
´ 768.
Supported sync rates
Horizontal sync 15 to 81 KHz
Vertical sync 56 to 85 Hz
Supported sync types
Separate Sync, Composite Sync, Sync-on-Green
Projector Placement Guidelines
The distance between the projector and the screen determines 
the actual image size. Use the general guidelines in the table 
below to determine the proper distance.
Projector Status Indicators
The power and lamp indicators at the top of the projector let 
you know the projector’s operating status, as described below.
Note: If you press the Power button to turn the projector back on 
while the power indicator is flashing orange, there may be a delay 
before the projected image appears.
Computer type Formats Resolutions
IBM PC and 
IBM PC compatibleVGA, SVGA, VESA, EGA
XGA640 ´ 480
640 ´ 200
640 ´ 400
800 ´ 600
1024 ´ 768
1152 ´ 864
*
1280 ´ 1024*
Apple Macintosh Standard 8- and 
24-bit color monitor640 ´ 480
832 ´ 624
1024 ´ 768
1017 ´ 768
1152 ´ 864
*
NEC PC 640 ´ 480
1120 ´ 750* 
Image size 
(diagonal)Horizontal distance from 
the projector screen
Minimum Maximum
300 inches 393.7inches (10 m)
200 inches 263.8 inches (6.7 m) 342.5 inches (8.7 m)
100 inches 129.9 inches (3.3 m) 169.3 inches (4.3 m)
80 inches  106.3 inches (2.7 m) 137.8 inches (3.5 m)
60 inches 78.7 inches (2 m) 102.4 inches (2.6 m)
40 inches 51.2 inches (1.3 m) 66.9 inches (1.7 m)
30 inches 39.4 inches (1 m) 51.2 inches (1.3 m)
23 inches 39.4 inches (1 m)
Status indicator Function
Power indicator
Steady orange: Sleep mode. (The projector is plugged in, 
but not projecting.)
Steady green: Power and lamp are on.
Flashing orange: The projector is hot.
Steady red The projector is too hot and has turned off.
Flashing red Internal projector problem.
Projection lamp indicator
Steady green Projection lamp is on.
Flashing green The projector is warming up.
Orange and red 
flashing alternatelyProjection lamp needs replacing.
Flashing orange Projector lamp is cooling down.
Steady red Projector lamp has burned out. Replace it 
to project images.
Flashing red Problem with projection lamp or lamp 
power supply. 
						

							EPSON PowerLite 7000XB Multimedia Projector
1/2/98PowerLite 7000XB Multimedia Projector - 3
Monitor and Computer In 1/2 
Connector Pin Assignments
The Monitor and Computer In 1/2 connectors are female 
video RGB, 15-pin micro-D-style connectors. The pin 
assignments are:
Information Reference List
Engineering Change Notices
None.
Technical Information Bulletins
None.
Product Support Bulletins
None.
Related Documentation
Input pinMonitor connector 
signalsComputer In 1/2 
connector signals
1 Red out / red video Red video
2 Green out / green video Green video
3 Blue out / blue video Blue video
4 Reserved Monitor (ID bit 2)
5GND GND
6 GND Red video GND
7 GND Green video GND
8 GND Blue video GND
9 Reserved +5 V
10 GND Synchronous GND
11 Reserved Monitor (ID bit 0)
12 Reserved SDA
13 Horizontal sync Horizontal sync
14 Vertical sync  Vertical sync
15 Vertical sync Reserved
CPD 5869 EPSON PowerLite 7000XB/5000XB 
Multimedia Projector User’s Guide
CPD 5870 EPSON PowerLite 7000XB/5000XB 
Easy Setup
SM-ELP7100 EPSON PowerLite 7000XB Multimedia 
Projector Service Manual
PL-ELP7100 EPSON PowerLite 7000XB Multimedia 
Projector Parts Price List