Epson Powerlite 61p Multimedia Projector User Manual

							Solving Problems91
Solving Problems with the Remote 
Control
The projector doesn’t respond to remote control commands.
■Make sure you are within 20 feet of the projector, and within 
range of the projector’s front or back sensor (approximately 30° to 
the left or right and 15° above or below).
■The remote control batteries may not be installed correctly or may 
be low on power. Replace the batteries as described on page 48.
■Dim the room lights and turn off any fluorescent lights. Make 
sure the projector is not in direct sunlight. Strong lighting, 
especially fluorescent lights, may affect the projector’s infrared 
receivers.
■Turn off any nearby equipment that emits infrared energy, such 
as a radiant room heater.
You have lost the remote control.
You need the remote control to access many projector features. If you 
have lost it, you can order another from Epson. See page 92 for details 
about ordering.
You can’t control the mouse pointer with the remote 
control.
■Make sure the USB mouse cable is securely connected to both 
your computer’s USB port and the projector’s USB port. For 
details, see page 19.
■Make sure RS232C is selected as the COM Port setting in the 
Extended menu. See page 60. 
■To use the USB mouse connection on a PC, your system must 
have a “clean” installation of Windows 98, Windows Me, 
Windows XP, or Windows 2000. The connection may not work 
correctly if your system was upgraded from Windows 95. 
						

							92Solving Problems
■If you’re running Windows 98 or Me, you may need to install 
USB drivers from your Windows CD-ROM. After you install the 
drivers, restart both the computer and the projector to 
resynchronize the setup.
Where To Get Help
Epson provides technical assistance through electronic support 
services 24 hours a day, as listed in the following table.
Telephone Support Services
To use the Epson PrivateLine Support service, call (800) 637-7661 
and enter the PIN on the Epson PrivateLine Support card included in 
your Start Here kit. This is the fastest way of speaking to a live 
representative, and it’s free. This service is available 6
AM to 6PM, 
Pacific Time, Monday through Friday, for the duration of your 
warranty period.
You may also speak with a projector support specialist by dialing one 
of these numbers:
■U.S.: (562) 276-4394, 6AM to 6PM, Pacific Time, Monday 
through Friday 
■Canada: (905) 709-3839, 6AM to 6PM, Pacific Time, Monday 
through Friday 
Toll or long distance charges may apply.
Service Access
World Wide Web From the Internet, you can reach 
Epson’s product support page at 
http://support.epson.com. After selecting 
your product, you can access troubleshooting 
information, download product 
documentation, and receive technical advice 
through e-mail.
Presenters Online  Access tips, templates, and training for 
developing successful presentations at 
http://www.presentersonline.com 
						

							Solving Problems93
Before you call, please have the following information ready:
■Product name (Epson PowerLite 61p or PowerLite 81p)
■Product serial number (located on the bottom of the projector) 
■Computer or video configuration
■Description of the problem
You can purchase screens, carrying cases, or other accessories 
from Epson at (800) 873-7766 or by visiting the Epson Store at 
www.epsonstore.com (U.S. sales only). In Canada, please call 
(800) 463-7766 for dealer referral
.
note
To purchase a replacement 
remote control, call 
(562) 276-4394 (U.S.) or 
(905) 709-3839 (for dealer 
referral in Canada).  
						

							94Solving Problems 
						

							95
Technical Specifications
General
Type of display Poly-silicon TFT active matrix
LCD panels (3) Diagonal size: 0.7 inches (17.8 mm)
Lens F=1.70 to 1.87, f=21.3 to 25.6 mm
Resolution 81p: 1024 
× 768 pixels 
61p: 800 
× 600 pixels 
Color reproduction Full color, 16.8 million colors
Brightness (ANSI) 2000 lumens (High brightness mode)
1500 lumens (Low brightness mode)
Contrast ratio 400:1
Image size 30 to 300 inches (0.8 to 7.6 meters)
Projection distance 2.9 to 35.5 feet (0.9 to 10.8 meters)
Projection methods Front, rear, ceiling
Focus adjustment Manual
Zoom adjustment Manual
Internal sound system 5 W monaural 
Optical aspect ratio 4:3 (horizontal : vertical)
Zoom ratio 1 : 1.2
Noise level 36 dB (High brightness mode)
30 dB (Low brightness mode)
Keystone correction
angle
± 15° vertical (maximum) 
						

							96Technical Specifications
Projection Lamp
Power consumption 200 W
Lamp life About 2000 hours (High brightness);
3000 hours (Low brightness)
Remote Control
Range 20 feet (6 meters)
Batteries (2) Alkaline AAA
Mouse Compatibility
Supports USB
Dimensions
Height 4.3 to 4.8 inches (foot extended)
(109 to 123 mm)
Width 13.8 inches (351 mm)
Depth 10.7 inches (272 mm)
Weight 8.9 lb (4.0 kg) 
Electrical 
Rated frequency 50/60 Hz
Power supply 100 to 120 VAC, 3.2 A
200 to 240 VAC, 1.6 A 
Power consumption Operating: 280 W
Standby: 5 W
Environmental
Temperature Operating: 41 to 95 °F (5 to 35 °C)
Storage: 14 to 140 °F (–10 to 60 °C)
Humidity  Operating: 20 to 80% RH, 
non-condensing 
Storage: 10 to 90% RH, 
non-condensing
note
Lamp life results vary 
depending on environmental 
conditions and usage. 
Turn the projector off when 
not in use. Continuous 
24-hour-a-day use may 
reduce the overall life of the 
product. 
						

							Technical Specifications97
Safety and Approvals
United States FCC 47CFR Part15B Class B (DoC)
UL60950 Third Edition
Canada ICES-003 Class B
CSA C22.2 No. 60950 (cUL) 
CE Marking Directive 73/23/EEC, 89/336/EEC
IEC60950 Third Edition
EN 55022, EN 55024
Pixelworks
™ DNX™ ICs are used in this 
projector. 
						

							98Technical Specifications
Compatible Video Formats
You can use any of the following video sources: VCR, DVD player, 
camcorder, digital camera, gaming console, or laser disc player. The 
projector supports composite video, S-video, component video, and 
RGB video, and it automatically senses the video format (HDTV, 
SDTV, NTSC, PAL, or SECAM). 
The projector supports these international video standards: 
Mode Refresh Rate (Hz)
NTSC 
NTSC 4:3
PAL
PAL 4:3
SECAM
SECAM 4:360
60
50
50
50
50
HDTV (720p)
HDTV (1080i)
SDTV (480i)
SDTV (540i)
SDTV (480p)60
60
60
50
60 
						

							Technical Specifications99
Compatible Computer Display Formats
You can connect the projector to a wide range of computers, including 
PCs and notebooks, Apple Macintosh, Power Macintosh series 
(including G3, G4 and G5 systems), PowerBook computers, many 
iMac and iBook series systems, and high-end workstations such as the 
Sun
® SPARCstation.™ 
Although images are displayed at the projector’s native resolution of 
1024 × 768 pixels (PowerLite 81p) or 800 × 600 pixels (PowerLite 
61p), Epson’s patented SizeWise chip supports computer display 
formats ranging from VGA through UXGA.
To project images output from a computer, the computer’s external 
monitor signal must be set at a refresh rate (vertical frequency) that’s 
compatible with the projector; see the following table for compatible 
formats. For best results, the computer’s resolution should be set to 
match the projector’s native resolution (1024 
× 768, or 800 × 600). If 
this resolution isn’t available, select one of the other compatible 
formats:
■Windows:
Right-click the desktop, select 
Properties, click the Settings tab, 
and select a compatible resolution. (For a notebook displaying 
through an external monitor port, you’ll need to click the 
Advanced button on the Settings tab, then adjust the resolution 
of the external monitor.) 
■Macintosh OS X:
From the Apple menu, select 
System Preferences, then click 
Displays. Make sure the VGA Display or Color LCD dialog box 
is selected, then click the 
Display tab and select a compatible 
resolution. 
■Macintosh OS 9.x:
On the Apple menu, choose 
Control Panels, then click 
Monitors or Monitors and Sound. Click the Monitor tab and 
select a compatible resolution for your external monitor. 
You may need to modify existing presentation files if you created them 
for a different resolution. See your software documentation for details. 
						

							100Technical SpecificationsThe projector supports these monitor display formats: 
Mode Refresh Rate (Hz) Resolution
VGA EGA 70 640 
× 480
VGA—60
VESA—60
VESA—72
VESA—75
VESA—8560
60
72
75
85640 
× 480
640 
× 480
640 
× 480
640 
× 480
640 
× 480
SVGA—56
SVGA—60
SVGA—72
SVGA—75
SVGA—8556
60
72
75
85800 
× 600
800 
× 600
800 
× 600
800 
× 600
800 
× 600
XGA—60
XGA—70
XGA—75
XGA—8560
70
75
851024 
× 768
1024 
× 768
1024 
× 768
1024 
× 768
SXGA1—70
SXGA1—75
SXGA1—8570
75
851152 
× 864
1152 
× 864
1152 
× 864
SXGA2—60
SXGA2—75
SXGA2—8560
75
851280 
× 960
1280 
× 960
1280 
× 960
SXGA3—60
SXGA3—75
SXGA3—8560
75
851280 
× 1024
1280 
× 1024
1280 
× 1024
UXGA—60 60 1600 
× 1200
iMAC VGA
iMAC SVGA
iMAC XGA
MAC13
MAC16
MAC19—60
MAC19
MAC21117
95
75
67
75
59
75
75640 
× 480
800 
× 600
1024 
× 768
640 
× 480
832 
× 624
1024 
× 768
1024 
× 768
1152 
× 870
SDTV (540i)
SDTV (480i)
SDTV (480p)50
60
60720 
× 540
640 
× 480
640 
× 480
HDTV (720p)
HDTV (1080i)60
601280 
× 720
1920 
× 1080