Epson Powerlite 5500c Users Guide

							Getting the Most Out of Your Projector
3
Getting the Most Out of Your Projector
Your projector comes with a full set of features that allow you to 
control the settings for the image display, video, and audio. Read 
this section for a quick summary of the important features.
Remote Control
The buttons on the remote control let you turn the projector on and 
off, and provide direct access to blank, freeze, volume, mute, and 
image source switching. Use the remote control buttons to access 
custom functions with the optional ELP Link III software and the 
projector’s menu system. You can even use the remote control in 
place of your computer’s mouse.
Sleep Mode
Sleep mode conserves electricity by automatically turning off the 
lamp after the projector has not been used for 30 minutes. In sleep 
mode, the projector remains on but the lamp is turned off, 
conserving electricity, cooling the projector, and extending the life 
of the lamp.
Control Panel 
The control panel buttons on the projector duplicate the remote 
control buttons and let you perform additional functions, such as 
adjusting the tracking and sync for computer images.
5500.book  Page 3  Wednesday, August 4, 1999  4:41 PM 
						

							Introduction  4
Optional Accessories
To enhance your use of the projector, EPSON provides the 
following optional accessories:
Replacement lamp 
and filter ELPLP06

Soft travel case
for projector and laptop ELPKS13

Hard travel case ELPKS14

Computer cable ELPKC02

ELP Link III set for PC 
(includes ELP Link III software 
and cables) ELPSW03

ELP Link III set for Macintosh 
(includes ELP Link III software 
and cables)  ELPSW04

Mac adapter set ELPAP01

Portable projection screen ELPSC06
You can purchase these accessories from your dealer or by calling 
EPSON Accessories at (800) 873-7766
; or visit our web site at 
www.epsonsupplies.com (U.S. sales only). In Canada, please call 
(800) 873-7766 for dealer referral.
5500.book  Page 4  Wednesday, August 4, 1999  4:41 PM 
						

							About This Manual
5
About This Manual
This manual describes how to install and use the EPSON 
PowerLite 5500C and PowerLite 7500C projectors. Except where 
noted, the instructions apply to both projectors.
Chapter 1, “Installation
,” gives step-by-step instructions on how to 
set up your projector and connect it to your computer or video 
source. Read the installation procedures that apply to your 
configuration.
Chapter 2, “Using the Projector,” describes how to turn on the 
projector and control simple projector settings using the remote 
control or the control panel.
Chapter 3, “Using the Projector Menus,” describes how to use the 
menus to adjust the color and image settings, change the display of 
the projected image, and modify audio settings such as bass and 
treble. 
Chapter 4, “Using the ELP Link III Software,” describes how to 
connect the ELP Link III cables and use the optional ELP Link III 
software to control the projector or configure special effects.
Chapter 5, “Maintenance,” describes how to clean your projector 
and perform limited maintenance. 
Chapter 6, “Troubleshooting,” describes how to interpret your 
projector’s warning lights and gives helpful information for 
avoiding errors, optimizing image quality, and solving problems.
5500.book  Page 5  Wednesday, August 4, 1999  4:41 PM 
						

							Introduction  6
Chapter 7, “Technical Specifications,” lists the technical 
specifications for the projector.
A Glossary and Index are provided at the end of the manual.
5500.book  Page 6  Wednesday, August 4, 1999  4:41 PM 
						

							Safety Instructions
7
Safety Instructions
Follow these safety instructions when setting up and using the 
projector:
1. Do not place the projector on an unstable cart, stand, or table.
2. Do not use the projector near water or sources of heat.
3. Use attachments only as recommended.
4. Use the type of power source indicated on the projector. If you 
are not sure of the power available, consult your dealer or power 
company.
5. Place the projector near a wall outlet where the plug can be 
easily unplugged.
Placez l’imprimante près d’une prise de contacte où la fiche 
peut être débranchée facilement.
6. Insert the projector’s three-wire grounding-type plug into a 
properly grounded outlet. If you have a two-prong outlet, 
contact an electrician to replace it. Do not hold the plug with 
wet hands.
7. Take the following precautions for the plug. Failure to comply 
with these precautions could result in sparks or fire.

Do not insert the plug into an outlet with dust present.

Insert the plug firmly into the outlet.
8. Do not overload wall outlets, extension cords, or integral 
convenience receptacles. This can cause fire or electric shock.
5500.book  Page 7  Wednesday, August 4, 1999  4:41 PM 
						

							Introduction  8
9. Do not place the projector where the cord can be walked on. It 
may result in fraying or damage to the plug.
10. Unplug the projector from the wall outlet before cleaning. Use a 
damp cloth for cleaning. Do not use liquid or aerosol cleaners.
11. Do not block the slots and openings in the projector case. They 
provide ventilation and prevent the projector from overheating. 
Do not operate the projector on a sofa, rug, or other soft surface, 
or in a closed-in cabinet unless proper ventilation is provided.
12. Never push objects of any kind through cabinet slots. Never 
spill liquid of any kind into the projector.
13. Except as specifically explained in this 
User’s Guide, do not 
attempt to service this product yourself. Refer all servicing to 
qualified service personnel. Opening or removing covers may 
expose you to dangerous voltages and other hazards.
14. Unplug the projector during lightning storms or when it will not 
be used for extended periods. 
15. Do not place the projector and remote control on top of 
heat-producing equipment or in a heated place.
16. Unplug the projector from the wall outlet and refer servicing to 
qualified service personnel under the following conditions:

When the power cord or plug is damaged or frayed

If liquid has been spilled into the projector, or if it has been 
exposed to rain or water
5500.book  Page 8  Wednesday, August 4, 1999  4:41 PM 
						

							Where to Get Help
9

If it does not operate normally when you follow the operating 
instructions, or if it exhibits a distinct change in performance, 
indicating a need for service

If it has been dropped or the housing has been damaged.
Where to Get Help
If you are having trouble setting up or running your projector, see 
the Help menu on the projector or read Chapter 6, 
“Troubleshooting.” If you can’t resolve the problem, EPSON 
provides technical assistance through electronic support services 
and automated telephone services 24 hours a day, as listed in the 
following tables:
Electronic Support Services
Service Access
World Wide Web From the Internet, you can reach EPSON’s Home Page at 
http://www.epson.com.
EPSON Internet 
FTP SiteIf you have Internet FTP capability, use your Web browser (or 
other software for FTP downloading) to log onto 
ftp.epson.com with the user name 
anonymous and your 
e-mail address as the password.
5500.book  Page 9  Wednesday, August 4, 1999  4:41 PM 
						

							Introduction  10
Automated Telephone Services
When support is required, follow the calling instructions on the back 
of the EPSON Private Line Technical Support card included with 
the projector. Technical support is also available in the U.S. by 
calling (310) 974-1202 between 6 
AM
 and 6
PM
, Pacific time, 
Monday through Friday. In Canada, call (905) 709-3839. Toll or 
long distance charges may apply.
Before you call, please have the following information ready:
EPSON Forum on 
CompuServe
® Members of CompuServe can type 
GO EPSON at the menu 
prompt to reach the Epson America Forum. For a free 
introductory CompuServe membership, call 
(800) 848-8199 
and ask for representative #529.
Service Access
EPSON SoundAdvice
SM
For pre-recorded answers to commonly asked questions 
about EPSON products 24 hours a day, seven days a week, 
call 
(800) 922-8911.
EPSON FaxAdvice
™
Access EPSON’s technical information library by calling 
(800) 922-8911. You must provide a return fax number to 
use this service.
EPSON Referral Service For the location of your nearest Authorized 
EPSON Reseller or Customer Care Center, call 
(800) 922-8911. Service Access
5500.book  Page 10  Wednesday, August 4, 1999  4:41 PM 
						

							Where to Get Help
11

Product name

Product serial number

Personal identification number (PIN) for EPSON Private Line 
Technical Support 

Computer configuration

Description of the problem
You can purchase accessories from 
EPSON
 Accessories at 
(800) 873-7766, or visit our web site at www.epsonsupplies.com 
(U.S. sales only). In Canada, please call (800) 873-7766 for dealer 
referral.
5500.book  Page 11  Wednesday, August 4, 1999  4:41 PM 
						

							11
1Installation
T
his chapter describes how to unpack and set up your projector, 
and connect it to other equipment. The projector must be connected 
to a computer or a video source such as a VCR, camcorder, or laser 
disc player before it can project any images. You may also want to:

Connect the mouse cable to use the remote control as a wireless 
mouse. Except for some laptops, this disables your computer’s 
mouse. If you are also viewing the display on your monitor, the 
remote control’s pointer controls the screen cursor.

Connect the projector to an audio source for one or both image 
sources. The audio source can be the computer, video source, or 
another device such as a stereo.
5500.book  Page 11  Wednesday, August 4, 1999  4:41 PM