Epson P6000 User Manual

Getting Started 11
Installing the BatteryThe viewer comes with a lithium-ion battery. 
1Slide the battery cover to the right to open it.
2Insert the battery into the compartment in the direction 
of the arrow on the battery.3Close the battery cover and slide it to the left until it 
clicks.
Charging the BatteryAfter installing the battery, you need to charge it using the 
AC adapter. It takes about 3.5 hours to fully charge the 
battery when the viewer is off, and longer when the viewer 
is on.
The...

Getting Started 12
To charge the battery, connect the AC adapter as shown 
below. Connect the other end to the power cord and plug it 
into an electrical outlet.Caution: 
Do not connect the AC adapter when the battery is not installed; 
this can damage the viewer. Turn off the viewer before 
disconnecting the AC adapter.The battery status is displayed in the top right corner of the 
LCD screen when the viewer is on.Note: 
The battery may become hot when the viewer is operated 
during charging. Charging...

Getting Started 13
4Pull out the battery. Then close the battery cover.Note: 
If you remove the battery, the date and time settings will be 
erased after about one day. The next time you turn on the 
viewer, the date and time setting screen will be displayed.
Turning On the PowerSlide the power switch down as shown below, then release it. 
The activity light flashes for a moment then turns off.Setting the Language, Date, and TimeThe first time you turn on the viewer, you see the Language 
setting...

Getting Started 14
Note: 
If you see the Home screen instead (as shown in “Using the 
Home Screen” on page 15), the language has already been 
selected. To change it or check the date and time, select 
Settings on the Home screen. Then follow the instructions in 
“Date and Time” or “Language” on page 73.1Press 
OK
 to select 
English
. You see a message about 
setting the date. 
2Press 
OK
. You see the Date and Time screen:
3Press right or left on the 4-way ring to highlight a setting 
to change....

Getting Started 15
Using the Home ScreenWhenever you turn on the viewer, the Home screen 
appears. All operations can be started from this screen. 
The following table summarizes the Home screen.Icon Function
 Battery
 iconIndicates the remaining charge in the battery. 
See “Charging the Battery” (page 11).
 CF icon Indicates that a memory card is inserted in the 
CompactFlash slot.
 SD icon Indicates that a memory card is inserted in the 
SD slot.
Battery icon Hold icon
SD iconCF icon
 Hold...

Getting Started 16
Tu r n i n g  O f f  t h e  P o w e rBefore you turn off the viewer, make sure the memory card 
access light is off. Then slide the power switch as shown 
below, and hold it down for a few seconds until the activity 
light flashes and the viewer turns off.
Saving PowerWhen you are not using the viewer, it goes into one of the 
power-saving modes listed below. You can adjust the timing 
for all of the power-saving modes; see “Power Save” on 
page 71 for more information.❍
The LCD screen...

Using Memory Cards 17
Chapter 2Using Memory CardsThe viewer has two memory card slots: one for 
CompactFlash or Microdrive
™ cards, and one for SD 
(Secure Digital) and MultiMediaCard cards.
This chapter explains how to insert and remove memory 
cards and how to display and copy files.
Inserting and Removing Memory 
CardsThe viewer supports the following types of memory cards:With a CompactFlash adapter, you can use the memory 
cards listed below in the 
CF Card
 slot:
Caution: 
Make sure you follow all...

Using Memory Cards 18
Using the CF Card SlotYou can use Type2 and 3.3V CompactFlash cards or 
Microdrive cards in the 
CF Card
 slot. If you have a 
CompactFlash adapter, you can also use other types of cards, 
as described in “Inserting and Removing Memory Cards” 
on page 17.
Insert the memory card into the slot with the label facing 
forward. Then push the memory card all the way into the 
slot.
If you are using a CompactFlash adapter, put the card into 
the adapter and insert the adapter into the...

Using Memory Cards 19
Using the SD Card SlotYou can use Secure Digital, SDHC, MultiMediaCard, or 
MMCplus cards in the 
SD Card
 slot.
Insert the memory card into the slot as shown below. Then 
push the memory card all the way into the slot.
Caution: 
Make sure you insert memory cards in the correct orientation. 
Otherwise, the card and viewer may be damaged.
To remove a card from the 
SD Card
 slot, first make sure the 
memory card access light is off. Then press in on the top of 
the card. 
When the...

Using Memory Cards 20
Copying Files From a Memory CardAfter you insert a memory card, you can browse the files and 
decide what you want to do with them, or simply copy all 
the files on the card to the viewer.Note: 
If the battery power is low, copying may not be completed. Use 
the AC adapter when copying files.Copying All Files1Insert a memory card.
If the Memory Card menu doesn’t open automatically, 
select 
Memory Card
 on the Home screen, then press 
OK
. You see the following menu:
2Select 
CF...