Epson P5000 User Manual

31
4.
Remove theblack paper stopfrom thespindle asshown.
 5.
Remove therollpaper fromthespindle.
 6.
Place therollpaper inits original package.
 Note:
Storerollpaper onitsend orhorizontally (ifthe packaging end-capsareinstalled). Neverstore
 roll
paper onitsedge, asaflat spot candevelop andlead toimaging artifactsonthe prints.
 Note:
Donot store rollpaper industy areas. Printhead maintenance andcleanings increaseifdust
 accumulates
onthe paper.
 7.
Close therollpaper cover.
 Note:
Toprevent dustfrom...

32
Loading
CutSheets inthe Paper Cassette
 Loading
CutSheets inthe Rear Manual Feeder
 Loading
CutSheets inthe Front Manual Feeder
 Adjusting
thePlaten Gap
 Parent
topic:Media Handling
 Loading
CutSheets inthe Paper Cassette
 You
canprint onavariety ofpaper typesandsizes upto17 inches (43cm) wide and0.1inch (0.27 mm)
 thick
fromthepaper cassette.
 1.
Make suretheprinter isturned on.
 2.
Onthe control panel,pressthe papersource button.
 3.
Press thedown arrow button toselect CutSheet ,and press theOK...

33
5.
Slide outthepaper cassette, thenpullitall the way out.
 Note:
Ifyou areloading paperthatis13 ×19 inches (330×483 mm) orlarger, pullthelever inthe
 paper
cassette toextend itas far aspossible andexpand theslider allthe way tothe edge ofthe
 paper
cassette.   

34
6.
Slide theedge guides outward.
 7.
Fan through astack ofpaper, thengently tapiton aflat surface toeven theedges.
 8.
Load thepaper withtheprintable sidefacedown andshort edge first.Place thepaper allthe way
 back
inthe paper cassette andnext tothe right edge. Makesurethepaper fitsunder thearrow on
 the
leftedge guide.    

35
9.
Slide theedge guides against thepaper, butnottootightly.  

36
10.
Insert thepaper cassette andpush itfirmly intotheprinter.
 Note:
Ifyou loaded paperthatis13 ×19 inches (330×483 mm) orlarger, installthepaper cassette
 cover,
aligning thearrows asshown. Thiscover isimportant tolimit dust from accumulating oncut
 sheets
inthe paper cassette andwillhelp reduce printhead maintenance andcleanings.   

37
11.
Replace theoutput tray.  

38
12.
Adjust theoutput traytofityour paper size.
 A4
paper :Slide outthethird extension, raisethepaper stopper, andpush theextension backin.
 A3
paper :Pull outthethird extension andraise thepaper stopper.
 Super
A3orlarger paper:Pull outthesecond andthird extensions andraise thepaper stopper.   

39
Parent
topic:CutSheet Handling
 Related
references
 Available
EpsonPapers
 Paper
Specifications
 Loading
CutSheets inthe Rear Manual Feeder
 Use
therear manual feedertoload onecutsheet atatime upto0.3 inch (0.79 mm)thick.
 1.
Make suretheprinter isturned on.
 2.
Onthe control panel,pressthe papersource button.
 3.
Press thedown arrow button toselect CutSheet ,and press theOK button.   

40
4.
Open andextend thepaper support.
 5.
Adjust theedge guide tofitthe paper width.