Epson EPL N3000T User Manual

168Using the PostScript Printer Software (Macintosh) Layout
Pages per sheet
Specify how many pages of your document to print on one sheet 
of paper.
Layout direction
Specify whether the document should be laid out from left to right 
or right to left.
Border
Specify whether the document prints with a border around the 
edges of the page. The options are none, Single hairline, Single 
thin line, Double hairline, and Double thin line.
Duplex
Print on Both Sides
Select this check box to print on both sides...

Using the PostScript Printer Software (Macintosh)169
5
5
5
5
5
5
5
5
5
5
5
5
Error Handling
PostScript Errors
No special reporting
When this radio button is selected, PostScript errors will not be 
reported.
Print detailed report
When this radio button is selected, a detailed report of the 
PostScript errors will be printed.
Paper Feed
All pages from
Select the paper source for your print job. The options are Auto 
Tray Select, MP Tray, Cassette 1, Cassette 2, Cassette 3, Manual 
Feed 1st Page, and...

170Using the PostScript Printer Software (Macintosh) Printer Features
Resolution
Select the resolution that you want to print in. The options are 
Fast and Quality. The Quality setting prints at a higher resolution, 
but the printing time will be longer.
RITech
Select this check box to use RITech when printing. RITech 
improves the appearance of printed lines, text, and graphics.
Toner Save
Select this check box to use the Toner Save feature when printing. 
When the Toner Save feature is turned on, the...

Setting Up Your Printer on a Network171
6
6
6
6
6
6
6
6
6
6
6
6
Chapter 6
Setting Up Your Printer on a Network
Sharing the Printer
This section describes how to share the printer on a standard 
Windows network.
The computers on a network can share a printer that is directly 
connected to one of them. The computer that is directly connected 
to the printer is the printer server, and the other computers are 
the clients which need permission to share the printer with the 
printer server. The clients share...

172Setting Up Your Printer on a Network Note:
❏When sharing the printer, be sure to set EPSON Status Monitor 3 
so that the shared printer can be monitored on the printer server. 
See “Setting Monitoring Preferences” on page 73.
❏If your computer is running the Windows operating system in a 
Windows Me, 98, or 95 environment, double-click the Network icon 
in the Control panel of the printer server and make sure that the 
“File and printer sharing for Microsoft Networks” component is 
installed. Then, on...

Setting Up Your Printer on a Network173
6
6
6
6
6
6
6
6
6
6
6
6
Note:
❏When “Insert the Disk” appears, insert the Windows Me, 98, 
or 95 CD-ROM in the computer. Click OK and then follow the 
on-screen instructions.
❏When the prompt to restart the computer appears, restart the 
computer and continue with the settings. See “For users 
restarting the computer” on page 173.
For users restarting the computer
Follow these steps if you had to restart the computer after 
performing the procedure above:
1....

174Setting Up Your Printer on a Network You need to set the client computers so that they can use the 
printer on a network. See the following pages for details.
❏“With Windows Me, 98, or 95” on page 181
❏“With Windows XP or 2000” on page 182
❏“With Windows NT 4.0” on page 186
Using an additional driver
If the printer server’s operating system is Windows 2000, XP, or 
Windows NT 4.0, you can install additional printer drivers in the 
server. The additional drivers are for client computers that have...

Setting Up Your Printer on a Network175
6
6
6
6
6
6
6
6
6
6
6
6
For Windows XP, if the following menu appears, click either 
Network Setup Wizard or If you understand the security risks 
but want to share printers without running the wizard, click 
here.
In either case, follow the on-screen instructions.
3. For a Windows 2000 or NT 4.0 printer server, select the 
Shared as button, then type the name in the Share Name box.
For a Windows XP printer server, select the Share this printer 
button, then type...

176Setting Up Your Printer on a NetworkNote:
Do not use spaces or hyphens for the Share name, or an error may 
occur.
4. Select the additional drivers.
Note:
If the computers of the server and clients use the same OS, you do 
not have to install the additional drivers. Just click OK after step3.
On the Windows NT 4.0 printer server
Select the Windows operating system that the clients are 
running on. For example, select Windows 95 to install the 
additional driver for the Windows Me, 98, or 95 clients....

Setting Up Your Printer on a Network177
6
6
6
6
6
6
6
6
6
6
6
6
Click Additional Drivers.
Select Windows being used for clients then click OK.
For Windows Me, 98, or 95 
clientsSelect Intel Windows 95 or 
98 (and Me)
For Windows NT 4.0 clients Select Intel Windows NT 4.0 
or 2000
For Windows XP or 2000 
clientsIntel Windows XP (or 2000) 
may been already selected.