Epson EPL N3000DT User Manual
Here you can view all the pages of manual Epson EPL N3000DT User Manual. The Epson manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 31
18Paper HandlingFor Windows, access the printer driver, click the Basic Settings tab, and select the paper source that you want to use from the Paper Source list. Then click OK. ❏Using the printer’s control panel Access the control panel’s Setup Menu, then select Paper Source and specify the paper source you want to use. Auto selection If you want the printer to select the paper source containing the appropriate size of paper automatically, select Auto Selection in the printer driver or Auto using...
Page 32
Paper Handling19 2 2 2 2 2 2 2 2 2 2 2 2 With one or two optional 550-Sheet Paper Cassette Unit A4 installed: MP Tray Lower Cassette 1 Lower Cassette 2 Lower Cassette 3 Note: ❏If you make paper size settings or paper source settings in your application, these settings may override the printer driver settings. ❏You can change the priority of the MP tray by using the MP Mode setting in the control panel’s Setup Menu. For details, see “Setup Menu” on page 352. ❏When Auto is set for the paper source...
Page 33
20Paper Handling❏To access the printer driver from Windows Me, 98, or 95, click Start, point to Settings, and click Printers. Next, right-click the EPSON EPL-N3000 Advanced icon and click Properties. ❏To access the printer driver from Windows XP, 2000, or NT 4.0, click Start, and click Printers and Faxes. Next, right-click the EPSON EPL-N3000 Advanced icon and click Printing Preferences (in Windows XP or 2000) or Document Defaults (in Windows NT 4.0). 2. Click the Basic Settings tab, then click...
Page 34
Paper Handling21 2 2 2 2 2 2 2 2 2 2 2 2 Output Tray Face-down tray Face-up tray Installing the Face-up tray Follow these steps to install the face-up tray. Paper size: All types of paper that are supported can be used. Paper type: 76.2 × 127.0 mm to 215.9 × 355.6 mm Capacity: Up to 500 sheets of plain paper
Page 35
22Paper Handling 1. Insert the right and left tabs of the face-up tray into the holes at the back of the printer. 2. Push up the lever and pull out the extension tray. Paper type: All types of paper that are supported can be used. Paper size: 76.2 × 127.0 mm to 215.9 × 297.0 mm Capacity: Up to 70 sheets of plain paper (Up to 10 mm thickness)
Page 36
Paper Handling23 2 2 2 2 2 2 2 2 2 2 2 2 Loading Paper This section describes how to load paper into the MP tray and the paper cassettes. If you use special media such as transparencies or envelopes, see also “Printing on Special Media” on page 28. MP tray and standard lower paper cassette The MP tray is the most flexible paper source, accommodating various paper sizes and media types. See “MP tray” on page 15 for details. For information on the paper sizes and types supported by the standard lower...
Page 37
24Paper Handling 1. Pull out the MP tray. Note: When pulling out the MP tray, raise it and pull it at an angle. 2. Remove the MP tray cover. 3. Adjust the cassette size to accommodate the paper you are loading.
Page 38
Paper Handling25 2 2 2 2 2 2 2 2 2 2 2 2 Slide the side paper guide outward while pinching the knob. Then, slide the end paper guide while pinching the knob, to accommodate the paper you are loading. 4. Load a stack of the desired media on the center of the cassette with the printable surface facing up. Then slide the side paper guide while pinching the knob until it is against the right side of the stack to get a snug fit.
Page 39
26Paper Handling 5. Replace the MP tray cover, making sure the front edge is flush and as far forward as possible. And reinsert the cassette in the printer. Note: The following paper sizes are detected automatically. When loading other paper sizes or fixing the paper size despite the loaded paper size, use the control panel to set the paper size. For details, see “Tray Menu” on page 348. Detected paper sizes:
Page 40
Paper Handling27 2 2 2 2 2 2 2 2 2 2 2 2 6. Extend the paper support to accommodate the size of the paper loaded in the MP tray or lower paper cassette to prevent it from slipping off the printer. 550-Sheet Paper Cassette Unit The paper sizes and types supported by the optional 550-Sheet Paper Cassette Unit are the same as the standard lower paper cassette. For more information, see “Optional 550-Sheet Paper Cassette Unit A4” on page 17. The paper-loading procedure is also the same as that for the...