Epson EPL N3000DT User Manual

148Using the PostScript Printer Software (Macintosh) Border
Specify whether the document prints with a border around the 
edges of the page. The options are none, Single hairline, Single 
thin line, Double hairline, and Double thin line.
Print on Both Sides
Select this check box to print on both sides of the paper.
Note:
You can select this check box only when necessary setting is made for 
the Duplex Unit. See “Changing the printer setup settings” on page 137 
for information.
Binding
Allows you to...

Using the PostScript Printer Software (Macintosh)149
5
5
5
5
5
5
5
5
5
5
5
5
Print detailed report
When this radio button is selected, a detailed report of the 
PostScript errors will be printed.
PostScript Settings
Format
Select the file format that you want the new file to have. The 
options are PostScript Job, EPS Mac Standard Preview, EPS Mac 
Enhanced Preview, and EPS No Preview.
PostScript Level
Select the PostScript compatibility level for the PostScript file that 
contains a description of your...

150Using the PostScript Printer Software (Macintosh) Print Setting
Resolution
Select the resolution that you want to print in. The options are 
Fast and Quality. The Quality setting prints at a higher resolution, 
but the printing time will be longer.
MediaType
Select the desired paper type to print on. The options are Normal, 
Thick, Transparency, and Extra Thick. Make sure to select the 
correct paper type to avoid smearing or wasting ink.
Collate
Select the On radio button to print multiple copies of...

Using the PostScript Printer Software (Macintosh)151
5
5
5
5
5
5
5
5
5
5
5
5
Start Side for Duplex
Select this check box to start printing from the second (back) page, 
leaving the first page blank. This setting is enabled only when the 
Print on Both Sides check box on the Layout setup option page is 
selected.
RITech
Select this check box to use RITech when printing. RITech 
improves the appearance of printed lines, text, and graphics.
Toner Save
Select this check box to use the Toner Save feature when...

152Using the PostScript Printer Software (Macintosh) 4. Double-click Mac OS X, and then double-click Adobe PS. The 
Authenticate window appears. Make sure to enter the user 
name and password for an administrator.
Note:
You need to login to Mac OS X as an administrator in order to 
perform software installations.
5. In the welcome screen that appears, click Continue, and 
follow the on-screen instructions.
 

Using the PostScript Printer Software (Macintosh)153
5
5
5
5
5
5
5
5
5
5
5
5
6. When the following screen appears, click Install.
7. When installation is done, click Close.
This completes the installation of the PostScript 3 printer driver. 
You now need to select the printer as described in the next section.
Selecting the Printer
The procedure for selecting the printer varies depending on the 
protocol or interface used to connect the printer to your computer.
Note:
❏You cannot use FireWire for printer...

154Using the PostScript Printer Software (Macintosh)
AppleTalk
Follow these steps to select the printer when it is connected using 
AppleTalk:
1. Go to the Utilities folder located inside the Applications 
folder, and then double-click Print Center.
The Printer List window appears.
Note:
If you are launching the Print Center for the first time, or there is 
no printer added to the Print Center yet, the following screen 
appears:
Click Add, and proceed to step 3.
2. Click Add in the Printer List window....

Using the PostScript Printer Software (Macintosh)155
5
5
5
5
5
5
5
5
5
5
5
5
3. In the window that appears, choose AppleTalk from the 
pop-up list.
Note:
Make sure to choose AppleTalk. Do not choose EPSON 
AppleTalk, because it cannot be used with the PostScript 3 printer 
driver.
4. Select your printer name from the Name list, and then select 
Auto Select in the Printer Model pop-up list.
Note:
By default, the six-digit MAC address is displayed after the printer 
name.
5. Click Add. The installation...

156Using the PostScript Printer Software (Macintosh)
IP Printing
Follow these steps to select the printer when it is connected using 
IP Printing:
Note:
Make sure to specify ASCII as the data format in the application. Binary 
data cannot be printed properly when using IP Printing.
1. Go to the Utilities folder located inside the Applications 
folder, and then double-click Print Center.
The Printer List window appears.
Note:
If you are launching the Print Center for the first time, or there is 
no...

Using the PostScript Printer Software (Macintosh)157
5
5
5
5
5
5
5
5
5
5
5
5
2. Click Add in the Printer List window. Alternatively, you can 
select Add Printer from the Printers menu.
3. In the window that appears, choose IP Printing from the 
pop-up list.
Note:
Make sure to choose IP Printing. Do not choose EPSON TCP/IP, 
because it cannot be used with the PostScript 3 printer driver.
4. Enter the IP address for the printer.
Note:
See the Network Guide or consult your network administrator for...