Epson EPL N3000 User Manual

158Using the PostScript Printer Software (Macintosh) 8. Click Add. Your printer’s IP address is automatically added 
as a printer name to the Printer List.
9. Select your printer’s IP address from the list, and then select 
Show Info from the Printers menu. The Printer Info dialog box 
appears.
10. Select Installable Options from the pop-up list, and make the 
necessary settings.
11. Click Apply Changes, and then close the Printer Info dialog 
box.
12. Quit Print Center.
USB
Follow these steps to select...

Using the PostScript Printer Software (Macintosh)159
5
5
5
5
5
5
5
5
5
5
5
5
2. Go to the Utilities folder located inside the Applications 
folder, and then double-click Print Center.
The Printer List window appears.
Note:
If you are launching the Print Center for the first time, or there is 
no printer added to the Print Center yet, the following screen 
appears.
Click Add, and proceed to step 3.
3. Click Add in the Printer List window. Alternatively, you can 
select Add Printer from the Printers menu.
 

160Using the PostScript Printer Software (Macintosh) 4. In the window that appears, choose USB from the pop-up list.
Your printer name automatically appears in the Name list.
Note:
M a ke sur e to  c ho ose USB. Do not choose EPSON USB, because it 
cannot be used with the PostScript 3 printer driver.
5. Make sure that your printer model is selected in the Printer 
Model list.
Note:
If your printer model is not automatically selected in the Printer 
Model list, you need to reinstall the PostScript printer...

Using the PostScript Printer Software (Macintosh)161
5
5
5
5
5
5
5
5
5
5
5
5
8. Select Installable Options from the pop-up list, and make the 
necessary settings.
9. Click Apply Changes, and then close the Printer Info dialog 
box.
10. Quit Print Center.
Rendezvous
There are two ways to select the printer when it is connected using 
Rendezvous.
Note:
Make sure to specify ASCII as the data format in the application. Binary 
data cannot be printed properly when using a Rendevous connection.
Selecting in...

162Using the PostScript Printer Software (Macintosh)Note:
If you are launching the Print Center for the first time, or there is 
no printer added to the Print Center yet, the following screen 
appears.
Click Add, and proceed to step 3.
2. Click Add in the Printer List window. Alternatively, you can 
select Add Printer from the Printers menu.
3. In the window that appears, select Rendezvous from the 
pop-up list.
4. Select your printer from the Name list. The printer name 
should have (PostScript)...

Using the PostScript Printer Software (Macintosh)163
5
5
5
5
5
5
5
5
5
5
5
5
5. Make sure that your printer model is selected in the Printer 
Model list.
Note:
If your printer model is not automatically selected in the Printer 
Model list, you need to reinstall the PostScript printer driver. See 
“Installing the printer driver” on page 151 for instructions.
6. Click Add. Your printer is automatically added to the Printer 
List.
7. Click on your printer name on the list, and then select Show 
Info from...

164Using the PostScript Printer Software (Macintosh)
Changing the Printer Setup Settings
You can easily change or update the printer setup settings. They 
include the amount of installed memory and whether options 
such as the Duplex Unit and lower cassette units are installed on 
the printer or not.
Follow these steps to change the printer setup settings:
1. Go to the Utilities folder located inside the Applications 
folder, and then double-click Print Center.
The Printer List window appears.
2. Select...

Using the PostScript Printer Software (Macintosh)165
5
5
5
5
5
5
5
5
5
5
5
5
The actual settings that are available might vary, depending on 
your application.
Page Setup dialog box
When you select Page Setup in the File menu of your application, 
the Page Setup dialog box appears. There are three setup option 
pages in this dialog box: Page Attributes, Custom Page Default, 
and Summary.
The settings and the buttons that appear in the Page Setup dialog 
box are explained below.
Cancel
Click this button...

166Using the PostScript Printer Software (Macintosh) Custom Page Default
Paper Size
Enter the desired Width and Height values for the custom page.
Note:
❏When you use custom paper size, make sure Width and Height that 
you specify do not exceed the custom paper size supported by your 
printer.
❏Image data may not be printed properly when you use custom paper 
size.
Margins
Specify the desired Top, Bottom, Left, and Right margin values.
Custom Page Name
Enter a name for the custom page that you are...

Using the PostScript Printer Software (Macintosh)167
5
5
5
5
5
5
5
5
5
5
5
5
Save Settings
Click this button to save changes to the settings. Until you make 
additional changes and click this button again, the changes saved 
will be used as the default settings for this printer.
Preview
Click this button to preview the printed image.
Save AS PDF...
Click this button to save the specified pages as a PDF file.
Copies & Pages
Copies
Specify how many copies of the document to print. Enter any 
number from 1...