Epson EasyMP Monitor User Manual
Have a look at the manual Epson EasyMP Monitor User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Monitoring window layout 21 Procedure Click the View menu, and select "Grouping view" or "Detail list view". Monitoring using Grouping viewMeanings of Grouping view icons In Grouping view, the patterns on the icons indicate the statuses of the projectors. If the group icons are round in shape, it indicates that there is another level below them. sp.23
Monitoring window layout 22 The icon patterns and their meanings are explained below. *1 When Temperature level display group view is set to On at Environment setup in the Tool menu, an icon indicating the internal temperature of the projector will be displayed on top of the projector icon. The default setting is Off. As you can get an idea of how the temperature inside the projector is increasing when Temperature level is displayed, you can make improvements to the projector's operating environment before a high internal temperature error or high-temperature warning occur. sp.27 *2 Check the following items. - Check that the projector's power is turned on. - Check that the LAN cable is connected. - Check that Standby Mode is set to Communication On (or Network On) or Network Monitoring is set to On in the projector's configuration menu. *3 Check that the projector has been correctly connected to the network. q The projector information that is generated when a problem is detected is stored until EasyMP Monitor is closed. EasyMP Monitor displays will not be updated automatically even if the projector status returns to normal. Click "Refresh" in the main window to update the status. Group No warnings or problems All projectors in the group are normal. Warning or problem A projector in the group has a warning or problem status. Notification A projector requiring immediate attention has been detected within the group. Monitoring disabled The projector is not being monitored. If you right-click the icon and select Monitoring enabled, the projector will be added to the projectors that are being monitored. Data being updated Projector No warnings or problems *1 Warning or problem Notification Monitoring disabled Data being updated Network error (Monitor Password authentication error) No Monitor Password was entered when the projector was registered, or an incorrect Monitor Password was entered. sp.12, p.15, p.16 Network error (TCP connection error) *2 Network error (ESC/VP.net communication error) *3 Projector
Monitoring window layout 23 Using the icons in Grouping view The following icon operations can be carried out in Grouping view. •Expanding and collapsing icons Each time you double-click a group icon, the icons for the projector that have been registered in that group are displayed or hidden. •Moving icons To change the position of an icon within Grouping view, simply drag and drop the icon to be moved. Monitoring using Detail list viewMeanings of Detail list view icons The status of registered projectors is displayed as a list in Detail list view regardless of which Group the projectors belong to.
Monitoring window layout 24 The icon patterns and their meanings are explained below. A Type Displays the projector status. No warnings or problems *1 Warning or problem An error has occurred on the projector. Notification The projector requires immediate attention. Monitoring disabled The projector is not being monitored. If you right-click the icon and select Monitoring enabled, the projector will be added to the projectors that are being monitored. Data being updated Network error (Monitor Password authentication error) No Monitor Password was entered when the projector was registered, or an incorrect Monitor Password was entered. sp.12, p.15, p.16 Network error (TCP connection error) *2 Network error (ESC/VP.net communication error) *3 B Group name When projectors are registered to a group, the name of the group that the projector belongs to is displayed. C Display name Shows the display name. D Power Shows the power on status for the projector. Power on and normal status Power off and normal status Power on and abnormal statusPower off and abnormal status E Lamp Hours Shows the lamp operating time for the projector. If the projector has 2 lamps, it shows the lamp operating time for both lamp 1 and lamp 2. F Temperature level The following five icons display the differing internal temperature status of the projector. Internal temperature normalInternal temperature normal High-temperature warningHigh-temperature warning Internal temperature error G Error information Shows a notification or warning/problem status using the following icons. Clean Air Filter Notice Replace Lamp *4 Replace Lamp (Lamp 1) Replace Lamp (Lamp 2) Lamp error (Lamp 1) Lamp error (Lamp 2) Lamp failure at power on (Lamp 1)Lamp failure at power on (Lamp 2) High-temperature warning Replace Air Filter No Air Filter Low Air Flow Air Flow Sensor Err. Supply System Error (Ballast 1) Supply System Error (Ballast 2)Cinema filter warning Shutter warning Lamp Cover Open Lamp Error Lamp Error (Lamp 1) Lamp Error (Lamp 2) Lamp failure at power on
Monitoring window layout 25 *1 When Temperature level display group view is set to On at Environment setup in the Tool menu, an icon indicating the internal temperature of the projector will be displayed on top of the projector icon. The default setting is Off. *2 Check the following items. - Check that the projector's power is turned on. - Check that the LAN cable is connected. - Check that Standby Mode is set to Communication On (or Network On) or Network Monitoring is set to On in the projector's configuration menu. *3 Check that the projector has been correctly connected to the network. *4 You can display Replace Lamp at any time by setting a preset in the Environment setup in the Tool menu. q •The projector information that is generated when a problem is detected is stored until EasyMP Monitor is closed. EasyMP Monitor displays will not be updated automatically even if the projector status returns to normal. Click "Refresh" in the main window to update the status. •Detectable error information differs with the projector you are using. Selecting display items You can select only the required items to be displayed in Detail list view. ProcedureA Select "Option" from the View menu. The Option window will be displayed. B Select the check box of the item you want to display. Lamp failure at power on (Lamp 1)Lamp failure at power on (Lamp 2) High internal temperature errorLow air flow error Air filter air flow sensor error Internal Error Fan error Sensor error Supply System Error (Ballast)Supply System Error (Ballast 1) Supply System Error (Ballast 2)Auto Iris Error Cinema filter error Shutter error Cooling system error (Peltier element)Cooling system error (pump) Other error Obstacle Detection Warning Exhaust vent shutter error Easy Interactive Function Error Obstacle Detection Error
Monitoring window layout 26 C Click "OK". D When all of the details of the item cannot be displayed in Detail list view, drag the boundary line on the right of the item name so that the view is extended to the desired width. Sorting lists You can sort detailed lists by using a specific row as a sort key, such as projector name order or IP address order. Procedure Click the item name of the row you want to use as the sort key. Searching for desired icons (Projector list) The Projector list feature is useful for searching in lists when many groups and projectors are registered and the icon you are looking for is not displayed on screen.Procedure Select "Projector list" from the View menu. The following window will be displayed. With Projector list, temperature level icons are not displayed regardless of the setting of Temperature level display group view at Environment setup in the Tool menu. The Projector list lets you check the registration details for groups in a hierarchical diagram. When you click on an icon, Grouping view and Detail list view are scrolled so that the selected icon is displayed in the window. Monitoring using the system tray The projector statuses are always displayed as icons in the system tray, even when Grouping view or Detail list view is not always displayed, and the statuses can be checked by the icon patterns.
Monitoring window layout 27 When the configuration menus are set using the following operations, an icon appears in the system tray and the status can be monitored by means of the icon's pattern. The icon patterns are explained below. ProcedureA Select "Environment setup" from the Tool menu. The Environment setup window will be displayed. B Select "Resident in the task tray". C Click "OK". q •Right-click the icon in the system tray to open a pop-up menu to select the Open the main screen or Exit. •If Register at startup in the Environment setup is selected, EasyMP Monitor starts automatically when the computer's power is turned on. When using EasyMP Monitor under Windows Vista or Windows 7, you must have administrator authority in order to use this function. Displaying projectors with problem or warning statuses in a list You can display a list of only the projectors which have a problem or warning status. Procedure Select "Warning and Error Projector list" from the View menu. The following Warning and Error Projector list window will be displayed. No problem Problem
Monitoring window layout 28 If you move the mouse pointer over the icon of the Error information, details of the error and the remedy will be displayed. If you double-click in a line, the properties for that projector will be displayed. sp.31
Monitoring window layout 29 The icon patterns and their meanings are explained below. A Type Shows the group or projector status. No warnings or problems *1 Warning or problem An error has occurred on the projector. Notification The projector requires immediate attention. Monitoring disabled The projector is not being monitored. If you right-click the icon and select Monitoring enabled, the projector will be added to the projectors that are being monitored. Data being updated Network error (Monitor Password authentication error) No Monitor Password was entered when the projector was registered, or an incorrect Monitor Password was entered. sp.12, p.15, p.16 Network error (TCP connection error) *2 Network error (ESC/VP.net communication error) *3 B Display name Shows the display name. C Power Shows the power on status for the projector. Power on and normal status Power off and normal status Power on and abnormal statusPower off and abnormal status D Lamp Hours Shows the lamp operating time for the projector. E Source Shows the input source that has been selected for the projector. Computer or Computer1Computer2 BNC S-Video Video (RCA) Video (BNC) SDI DisplayPort DVI-D1 or HDMI1, DVI-D, HDMI *4 DVI-D2 or HDMI2 *5 D-Video EasyMP USB Display USB or USB1 USB2 LAN F Temperature level The following five icons display the differing internal temperature status of the projector. Internal temperature normalInternal temperature normal High-temperature warningHigh-temperature warning Internal temperature error G Error information Shows a warning/problem status using the following icons. Replace Lamp *6 Replace Lamp (Lamp 1)
Monitoring window layout 30 *1 When Temperature level display group view is set to On at Environment setup in the Tool menu, an icon indicating the internal temperature of the projector will be displayed on top of the projector icon. The default setting is Off. *2 Check the following items. - Check that the projector's power is turned on. - Check that the LAN cable is connected. - Check that Standby Mode is set to Communication On (or Network On) or Network Monitoring is set to On in the projector's configuration menu. *3 Check that the projector has been correctly connected to the network. *4 It describes DVI-D if the projector is equipped with both DVI-D and HDMI input terminal. *5 It describes HDMI if the projector is equipped with both DVI-D and HDMI input terminal. *6 You can display Replace Lamp at any time by setting a preset in the Environment setup in the Tool menu. q Detectable error information differs with the projector you are using. Checking properties in detail You can check the properties of Group and projectors in detail. Displaying Group properties Procedure You can use either of the following methods to display the proper- ties. •Displaying the properties for all groups in Grouping view Right-click in Grouping view and select Property. Replace Lamp (Lamp 2) Lamp error (Lamp 1) Lamp error (Lamp 2) Lamp failure at power on (Lamp 1) Lamp failure at power on (Lamp 2)High-temperature warning Replace Air Filter No Air Filter Low Air Flow Air Flow Sensor Err. Supply System Error (Ballast 1)Supply System Error (Ballast 2) Cinema filter warning Shutter warning Lamp Cover Open Lamp Error Lamp Error (Lamp 1) Lamp Error (Lamp 2) Lamp failure at power on Lamp failure at power on (Lamp 1) Lamp failure at power on (Lamp 2)High internal temperature error Low air flow error Air filter air flow sensor error Internal Error Fan error Sensor error Supply System Error (Ballast) Supply System Error (Ballast 1)Supply System Error (Ballast 2) Auto Iris Error Cinema filter error Shutter error Cooling system error (Peltier element) Cooling system error (pump)Other error Exhaust vent shutter error Obstacle Detection warning Easy Interactive Function ErrorObstacle Detection Error