Epson Brightlink 455wi Quick Guide

BrightLink  455Wi
TM
Guide rapide
Installation du logiciel
Utilisation du projecteur
Résolution des problèmes
Avis et garantie
Keep this book with the pens and remote control at all times.
Conservez ce guide avec les crayons et la télécommande en tout temps.
Quick Guide
Installing the Software
Using the Projector
Solving Problems
Notices and Warranty 

2
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   3
Quick Projector Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   4
Getting Started. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   6
Installing the Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   6
Installing the Pen Batteries  . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

3
Introduction
Yo u r  B r i g h t L i n k™ 455Wi projector turns any wall into an interactive whiteboard. 
After your projector has been installed, read this booklet to:
■Install the software on your computer 
■Connect the cables to your computer
■Use the remote control
■Turn on the projector and adjust the image
■Launch the Easy Interactive Driver
■Calibrate and use the pens
■Launch TeamBoard Draw
■Solve basic problems
This booklet explains how to use the projector with a laptop or other computer. 
You...

4Introduction
Quick Projector Setup 
Follow the steps on pages 4 and 5 to get up and running fast. Copy these pages, 
laminate if necessary, and keep with the projector as a “cheat sheet.” If you need 
more detail, turn to the page listed for each step.
1. Install Easy Interactive Driver and TeamBoard Draw (see page 6). Use the 
CDs that came with the projector, or download from:
epson.com/support/brightlinkdownloads (U.S.)
epson.ca/support/brightlinkdownloads (Canada)
2. Make sure the batteries are...

Quick Projector Setup5 6. Launch Easy Interactive Driver on your computer. You should see the   
pen icon in lower right corner of your screen (Windows
®) or in the Dock 
(Mac OS®). If you don’t see the icon, see page 14 or do one of the following:
■Windows: select  or Start > All Programs or Programs > Epson 
Projector
 > Easy Interactive Driver.
■Mac OS: open the Applications folder, then select the Easy Interactive 
Driver
 icon.
7. Calibrate your system (see page 15).
■Windows: click the   pen icon...

6Getting Started
Getting Started
Before you can use your interactive projector, you need to install the software and 
connect the cables to your computer. Then you can turn on the projector and 
calibrate.
Installing the Software
This section explains how to install the software for the interactive pens and your 
on-screen manuals.
Periodically, it’s a good idea to check Epson’s support website for free updates to 
your Easy Interactive software. Visit epson.com/support/brightlinkdownloads 
(U.S.) or...

Installing the Software7 4. When you see one of the following screens, select 
Register to Startup 
(Windows) or Start up (Macintosh) and Launch Easy Interactive Driver.
5. Click 
Install (Windows) or Continue (Mac OS).
6. Follow the on-screen instructions to finish installing the software and start 
Easy Interactive Driver. 
Installing the Manuals
1. Insert the BrightLink 455Wi CD in your computer.
Windows: If you see the AutoPlay window, click 
Run Setup.exe. If you see a 
User Account Control screen,...

8Getting Started
Installing TeamBoard Draw
TeamBoard Draw annotation and presentation software lets you write or draw on 
the projection surface. The software also provides advanced tools for saving and 
editing your annotations and creating interactive presentations.
1. Insert the TeamBoard Draw Annotation & Presentation Software CD in your 
computer.
Windows: If you see the AutoPlay window, click 
Run DrawSASetup.exe. If 
you see a User Account Control screen, click 
Continue or Yes.
Mac OS: Open the...

Installing the Remote Control Batteries9 1. Press in the tab on the battery cover as you lift the cover off.
2. Install two batteries, inserting the 
+and– ends as shown.
3. Replace the battery cover and press it down until it clicks into place.
Installing the Remote Control Batteries
Make sure the remote control batteries are installed. If you need to install or 
replace them, use 2 AA alkaline batteries.
1. Press in on the catch on the battery cover as you lift the cover off. 

10Getting Started
2. Install two batteries, inserting the +and– ends as shown.
3. Replace the battery cover and press it down until it clicks into place.
Connecting the Cables
You can connect the projector to any computer that has a standard monitor out 
port using the VGA computer cable that came with the projector. 
In addition, you must connect the USB cable before you can use the interactive 
pens. If the cable is not long enough to reach your computer, you may need to use 
a USB booster cable (not...