Epson Brightlink 455wi Interactive Projector Users Guide

Presenting With the Remote Control61
If you are not connected to another image source, the Slideshow 
program appears automatically.
Files for images that have been scanned or modified will display 
an icon, rather than a thumbnail image. 
If necessary, press the arrow buttons on the remote control to 
highlight the device you want to present from, then press the 
Enter button.
3. If you need to select a subfolder on your device, press the arrow 
buttons to highlight the folder and press 
Enter. 
4. To...

62Presenting With the Remote Control
■If all the images in a folder do not fit on the Slideshow screen, 
highlight 
Next page at the bottom of the screen and press Enter 
to display the next screen full of images. Select 
Previous page at 
the top of the screen to select the previous screen.
■To exit the slideshow, press Esc, select Exit, and press Enter.
Selecting Slideshow Display Options
1. Highlight Option at the bottom left corner of the slideshow 
screen and press 
Enter. You see this screen:
2....

63
5
Using the Projector Menus
You can use the projector’s on-screen menus to adjust the image, 
sound, and other features. This chapter covers the following 
information:
■Using the menu system
■Adjusting the image
■Adjusting signal settings
■Customizing projector features
■Customizing power and operation
■Using the projector security features 

64Using the Projector Menus
Using the Menu System
You can use the remote control or the projector’s control panel to 
access the menus and change settings. Follow these steps:
1. To display the menu screen, press the 
Menu button on the 
remote control or on the projector. You see a menu screen similar 
to the one below: 
The menus are listed on the left and the options available for the 
highlighted menu are shown on the right.
2. Use the arrow buttons on the remote control or the projector to 
scroll...

Using the Projector Menus65
5. After changing the settings, press the Esc button to save your 
changes and return to the previous menu (or press it again to exit 
the menu system). You can also press the 
Menu button to exit. 
Restoring the Default Settings
You can use the Reset option on any menu to restore the 
factory-default settings for the settings in that menu.
To restore all the projector settings to their factory-default values, 
select the 
Reset menu, highlight Reset All, press Enter, and...

66Using the Projector Menus2. Adjust the desired options as needed:
■Color Mode
Lets you quickly adjust the color and brightness for various 
environments. You can save a different setting for each 
source. See page 45 for a description of each color mode.
■Brightness 
Lightens or darkens the overall image. 
■Contrast
Adjusts the difference between light and dark areas. 
■Color Saturation
Adjusts the color depth of the image. 
■Tint
Adjusts the balance of green to magenta in the image. 
■Sharpness...

Using the Projector Menus67
Adjusting Signal Settings
Although the projector normally detects and optimizes the input 
signal automatically, you can use the Signal menu to make manual 
adjustments. In addition to changing the position of the projected 
image, you can correct tracking and sync for computer images, or 
change the aspect ratio. 
1. Press the 
Menu button and select the Signal menu. You see a 
screen similar to one of those below. (The settings will be different 
depending on the source you...

68Using the Projector Menus
■Tracking
Adjust this value to eliminate vertical stripes in computer 
images.
■Sync
Adjust this value if computer images appear blurry or flicker.
■Position
If the image is slightly cut off on one or more sides, it may not 
be centered exactly. Select this setting and use the arrow 
buttons to center it.
■Progressive
For composite video, S-Video, and component video. Turn 
this setting on to convert interlaced signals into progressive 
signals (best for moving images). Leave...

Using the Projector Menus69
Customizing Projector Features
You can use the Settings menu to lock the buttons on the projector, 
adjust audio volume, and customize several other features.
■Keystone 
Adjusts the shape of the image if the projector has been tilted 
upward or downward. If you notice that lines or edge look jagged 
after adjustment, decrease the 
Sharpness setting (see page 65).
■Zoom 
Adjusts the image size from 
Wide (larger) to Tele (smaller).
■Control Panel Lock
Lets you disable all of...

70Using the Projector Menus
■Mic Input Level
Adjusts the microphone volume.
■Remote Receiver
Deactivates the projector’s front and/or rear sensors that detect 
signals from the remote control. Use this setting to prevent use of 
the remote control or to stop interference from bright fluorescent 
lights. Restart the projector for this setting to take effect.
■User Button
Lets you create a shortcut to one of the following menu items: , 
Power Consumption, Info, Progressive, Closed Caption, 
Test Pattern
,...