Epson Brightlink 425wi Users Guide

1.
Open thebattery coverasshown.
 2.
Insert thebatteries withthe+and –ends facing asshown.
 41   

3.
Close thebattery coverandpress itdown untilitclicks intoplace.
 Warning:
Disposeofused batteries according tolocal regulations. Donot expose batteries toheat
 or
flame. Keepbatteries outofthe reach ofchildren; theyarechoking hazards andarevery
 dangerous
ifswallowed.
 Parent
topic:Setting Upthe Projector
 Installing
Batteriesinthe Interactive Pens
 Each
penuses twoAAA batteries.
 Caution:
Useonly thetype ofbatteries specified inthis manual. Donot install batteries ofdifferent types,
 or
mix new...

2.
Insert thebatteries withthe+and –ends facing asshown.
 3.
Replace thebattery coverandpress itdown untilitclicks intoplace.
 Warning:
Disposeofused batteries according tolocal regulations. Donot expose batteries toheat
 or
flame. Keepbatteries outofthe reach ofchildren; theyarechoking hazards andarevery
 dangerous
ifswallowed.
 Parent
topic:Setting Upthe Projector
 43   

Using
theProjector onaNetwork
 Follow
theinstructions inthese sections toset upyour projector foruse onanetwork.
 Note:
Touse theinteractive penswithyour projected computer image,youneed toconnect theUSB
 cable
fromtheinteractive moduletoyour computer, evenifyou areprojecting throughthenetwork.
 Wired
Network Projection
 Wireless
NetworkProjection
 Setting
UpProjector NetworkE-MailAlerts
 Setting
UpMonitoring UsingSNMP
 Controlling
aNetworked ProjectorUsingaWeb Browser
 Crestron
RoomView Support...

Connecting
toaWired Network
 To
connect theprojector toawired localareanetwork (LAN),usea100Base-TX or10Base-T network
 cable.
Toensure properdatatransmission, useaCategory 5shielded cableorbetter.
 1.
Connect oneendofthe network cabletoyour network hub,switch, orrouter.
 2.
Connect theother endofthe cable tothe projectors LANport.
 Parent
topic:WiredNetwork Projection
 Selecting
WiredNetwork Settings
 Before
youcanproject fromcomputers onyour network, youmust select thenetwork settingsforthe...

3.
Select theNetwork menuandpress Enter.
 4.
Select Network Configuration andpress Enter.
 5.
Select theBasic menuandpress Enter.
 6.
Select thefollowing basicoptions asnecessary:
 •
Projector Nameletsyou enter aname upto16 alphanumeric characterslongtoidentify the
 projector
overthenetwork.
 46 

•
PJLink Password letsyou enter apassword upto32 alphanumeric characterslongforusing the
 PJLink
protocol forprojector control.
 •
Web Control Password letsyou enter apassword upto8alphanumeric characterslongfor
 accessing
theprojector overtheweb.
 •
Projector Keywordletsyou turn onasecurity password toprevent accesstothe projector by
 anyone
notinthe room withit.You must enter adisplayed, randomized keywordfromacomputer
 using
theEasyMP NetworkProjection softwaretoaccess theprojector.
 Note:...

10.
Toprevent displayofthe IPaddress onthe standby screen,turnoffIPAddress Display.
 11.
When youfinish selecting settings,selectComplete andfollow theon-screen instructions tosave
 your
settings andexitthemenus.
 Parent
topic:WiredNetwork Projection
 Wireless
NetworkProjection
 You
cansend images toyour projector throughawireless network. Todothis, youmust install the
 optional
EPSON802.11b/g/n wirelessLANmodule, andthen setupyour projector andcomputer for
 wireless
projection.
 Note:
Touse...

Parent
topic:UsingtheProjector onaNetwork
 Related
references
 Optional
Equipment andReplacement Parts
 Installing
theWireless LANModule
 To
use theprojector overawireless network, installtheoptional EPSON802.11b/g/n wirelessLAN
 module.
Donot install anyother typeofwireless LANmodule.
 Caution:
Neverremove themodule whileitsindicator lightisgreen orflashing, orwhile youare
 projecting
wirelessly. Youmay damage themodule orlose data.
 1.
Turn offthe projector andunplug thepower cord.
 2.
Remove...

3.
Insert thewireless LANmodule intotheport.
 4.
Replace thewireless LANmodule stopper andsecure itusing thescrew youremoved.
 5.
Plug inand turn onthe projector.
 Parent
topic:Wireless NetworkProjection
 50