Epson B 500DN User Manual

Printing with Special Layout Options91
6. Select Layout from the pop-up menu.
7. Select from the following settings:
Pages per 
SheetPrints multiple pages of your document on a single piece of paper. 
You can choose from 1, 2, 4, 6, 9, or 16.
Layout 
DirectionAllows you to specify the order in which the pages will be printed on 
the sheet of paper.
BorderPrints a border around the pages printed on each sheet. You can 
choose from None, Single Hairline, Single Thin Line, Double Hairline, 
or Double Thin...

Printing with Special Layout Options92
8. Select Print Settings from the pop-up menu.
9. Make the settings that you want to use to print. See online help for details of Print 
Settings.
&See “Selecting the Correct Paper Type or Media Type” on page 29.
After completing the steps above, print one test copy and examine the results before 
printing an entire job.
Poster Printing (for Windows only)
Poster printing allows you to print poster-size images by enlarging one page to cover 
several sheets of paper.
 

Printing with Special Layout Options93
Printer Settings
1. Access the printer settings.
&See “Accessing the Printer Driver for Windows” on page 14.
2. Click the Main tab, then select one of the following Quality Option settings: 
❏Draft for rough drafts with reduced print quality
❏Text for text-only documents
❏Text & Image for higher quality pages with text and images
❏Web for web pages
❏Photo for good quality and speed
3. Select the paper source as the Source setting.
4. Select the appropriate Type...

Printing with Special Layout Options94
&See “Selecting the Correct Paper Type or Media Type” on page 29.
5. Select the appropriate Size setting.
6. Select Portrait (tall) or Landscape (wide) to change the orientation of your printout.
7. Click the Page Layout tab and select Multi-Page, then select Poster Printing. Click 
the up or down arrow to select 2x1, 2x2, 3x3, or 4x4.
 

Printing with Special Layout Options95
8. Click Settings to adjust the way your poster will be printed. The Poster Settings window 
opens.
9. Make the following settings:
Note:
If you want to print only a few of the panels without printing the entire poster, click the panels 
that you do not want to print.
10. Click OK to close the Poster Settings window.
After completing the steps above, print one test copy and examine the results before 
printing an entire job. Then follow the instructions.
&See “How...

Printing with Special Layout Options96
How to Make a Poster from Your Printouts
Here is an example of how to make a poster with 2x2 selected under Poster Printing and 
Overlapping Alignment Marks selected as the Print Cutting Guides.
1. Cut off the margin of Sheet 1 along a vertical line through the center of the top and 
bottom cross marks: 
2. Place the edge of Sheet 1 on top of Sheet 2 and align the cross marks, then temporarily 
tape the two sheets together from the back:
3. Cut the taped sheets in...

Printing with Special Layout Options97
4. Align the edges of the paper using the alignment markers and tape them together from 
the back:
5. Repeat the instructions from step 1 to step 4 to tape Sheets 3 and 4 together.
6. Repeat the instructions from step 1 to step 4 to tape the top and bottom edges of the 
paper:
7. Cut off the remaining margins.
Watermark Printing (for Windows only)
Watermark printing allows you to print a text-based or image-based watermark on your 
document.
 

Printing with Special Layout Options98
Printing the Watermark
1. Access the printer settings.
&See “Accessing the Printer Driver for Windows” on page 14.
2. Click the Main tab, then select one of the following Quality Option settings: 
❏Draft for rough drafts with reduced print quality
❏Text for text-only documents with higher text quality
❏Text & Image for higher quality documents with text and images
3. Select the paper source as the Source setting.
4. Select the appropriate Type setting.
&See...

Printing with Special Layout Options99
6. Select Portrait (tall) or Landscape (wide) to change the orientation of your printout.
7. Click the Page Layout tab, choose the desired watermark from the Watermark list, then 
click Settings.
If you want to create your own watermark, see the following instructions.
&See “Creating Your Own Watermark” on page 100.
 

Printing with Special Layout Options100
8. Specify the settings you want for the watermark. You can change the position and size 
of the watermark by dragging the image within the preview window.
9. Click OK to return to the Page Layout window.
10. Click OK to close the printer settings window.
After completing the steps above, print one test copy and examine the results before 
printing an entire job.
Creating Your Own Watermark
You can add your own text-based or image-based watermarks to the Watermark...