Epson B 310N User Manual

Printing with Special Layout Options61
10. Specify the edge of the paper where the binding will be placed. You can choose Left, 
Top, or Right.
11. Choose cm or inch as the Unit setting. Then specify the width of the binding margin. 
You can enter any width from 0.12 to 1.18 inches, or from 0.3 to 3.0 cm.
Note:
The actual binding margin may be different from the specified settings depending on your 
application. Experiment with a few sheets to examine actual results before printing the entire 
job.
12....

Printing with Special Layout Options62
1. Access the EPSON Printer Utility3 dialog.
&See “Accessing the Printer Driver for Mac OS X” on page 15.
2. Click the Printer and Option Information button.
 

Printing with Special Layout Options63
3. Make sure that Duplexer Installed is displayed in the Auto Duplex Printing Information 
section, and then click OK.
4. Close the EPSON Printer Utility3 dialog.
5. Access the Print dialog.
&See “Accessing the Printer Driver for Mac OS X” on page 15.
6. Click the dbutton to extend this dialog.
 

Printing with Special Layout Options64
7. Select the printer you are using as the Printer setting, and then make suitable settings.
Note:
Depending on your application, you may not be able to select some of the items in this dialog. 
If so, click Page Setup on the File menu of your application, and then make suitable settings.
 

Printing with Special Layout Options65
8. Select Print Settings from the pop-up menu.
9. Select Plain Paper/Bright White Paper as the Media Type setting.
10. Make other settings that you want to use to print. See online help for details of Print 
Settings.
 

Printing with Special Layout Options66
11. Select 2-sided Printing Settings from the pop-up menu.
12. Select the 2-sided Printing check box.
13. Select the Binding edge setting.
14. Select one of the Document Type settings. This automatically adjusts Print Density and 
Ink Drying Time.
Note:
If you are printing high-density data, such as photos or graphs, we recommend adjusting the 
Print Density.
15. Load paper into the printer, and click Print.
&See “Loading Paper” on page 21.
 

Printing with Special Layout Options67
Standard Double-sided Printing for Mac OS X 10.4
Automatic Double-sided Printing (Using the Duplex Unit)
Follow the steps below to print odd- and even-numbered pages onto opposite sides of the 
sheet using the duplex unit.
Note:
❏Automatic double-sided printing supports plain paper only.
❏Thick plain paper is not supported for automatic double-sided printing.
1. Access the EPSON Printer Utility3 dialog.
&See “Accessing the Printer Driver for Mac OS X” on page 15.
2....

Printing with Special Layout Options68
9. Access the Print dialog.
&See “Accessing the Printer Driver for Mac OS X” on page 15.
10. Select Print Settings from the pop-up menu.
11. Select Plain Paper / Bright White Paper as the Media Type setting.
12. Make the settings that you want to use to print. See online help for details of Print 
Settings.
 

Printing with Special Layout Options69
13. Select 2-sided Printing Settings from the pop-up menu.
14. Select the 2-sided Printing check box.
15. Select the Binding edge setting.
16. Select one of the Document Type settings. This automatically adjusts Print Density and 
Ink Drying Time.
Note:
If you are printing high-density data, such as photos or graphs, we recommend adjusting the 
Print Density.
17. Load paper into the printer, and click Print.
&See “Loading Paper” on page 21.
Folded Booklet...

Printing with Special Layout Options70
1. Access the printer settings.
&See “Accessing the Printer Driver for Windows” on page 14.
2. Click the Main tab, then select one of the following Quality Option settings:
❏Draft for rough drafts with reduced print quality
❏Text for text-only pages
❏Text & Image for higher quality pages with text and images
❏Graphic for higher quality graphics
❏Photo for good quality and speed
3. Select Rear Tray as the Source setting.
4. Select the appropriate Type setting.
&See...