Epson AcuLaser M2300DN User Manual

Replace Maintenance Unit (error)
Explanation:
The maintenance unit has reached the end of its service life and need to be replaced. 
Replace the maintenance unit with a new one. See “Replacing Consumable Products/Maintenance
Parts” on page 68 for instructions. See also the instructions that come with the maintenance unit.
Replace Maintenance Unit (error)
Explanation:
The maintenance unit has reached the end of its service life and need to be replaced. 
Replace the maintenance unit with a new one. See...

Paper Out
Explanation:
There is no paper in the specified paper source.
Load paper of the size into the paper source.
Paper Jam
Explanation:
A paper jam occurs.
Clear the paper jam. See “Clearing Jammed Paper” on page 79 for instructions.
Reset All
Explanation:
All printer settings have been reset to the default configuration, or to the last settings that were saved.
Service Required (engine error)
Explanation:
A print engine error has been detected.
T u r n  o f f  t h e  p r i n t e r .  W a i t  a t...

Printing in the PostScript 3 Mode Problems (Epson AcuLaser M2400/
M2410 series only)
The problems listed in this section are those that you may encounter when printing with the PostScript
driver. All procedural instructions refer to the PostScript printer driver.
The printer does not print
CauseWhat to do
An incorrect printer driver is selected. Make sure that the PostScript printer driver that you are using to
print is selected.
The printer or its driver does not appear in utilities in the printer...

The edges of texts and/or images are not smooth
CauseWhat to do
The Print Quality is set to Fast. Change the Print Quality setting to Fine or Maximum.
The printer does not have sufficient memory. Increase the printer memory.
The printer does not print normally via the USB interface
CauseWhat to do
For Windows users only
The Data Format setting in the printer’s Properties is not
set to ASCII or TBCP.The printer cannot print binary data when it is connected to the
computer via the USB interface. Make sure...

CauseWhat to do
For Windows users only
The print data is too large.Click Advanced on the PostScript sheet of the printer’s Properties,
then change the Data Format setting from ASCII data (default) to
TBCP (Tagged binary communications protocol).
When the Binary setting is set to On, TBCP is not available. Use the
Binary protocol. For details about setting, see the Network Guide.
For Windows users only
Printing cannot be performed using the network
interface.Click Advanced on the PostScript sheet of the...

Chapter 7
About the Printer Software
Using the Printer Software for Windows
Using the printer driver
The printer driver is the software that allows you to adjust printer settings to get the best results.
Note:
The printer driver’s online help provides details on printer driver settings.
Note for Windows Vista users:
Do not press the power button or put your computer to standby or hibernate mode manually during
printing.
Accessing the printer driver
You can access the printer driver directly from any...

Windows XP, Server 2003 users
Click Start, click Printers and Faxes. Right-click your printer’s icon, then click Printing
Preferences.
Windows 2000 users
Click Start, point to Settings, then click Printers. Right-click your printer’s icon, then click Printing
Preferences.
Printing a status sheet
To confirm the current status of the printer, print a status sheet from the printer driver.
Note:
Print the status sheet on A4 size paper (Portrait.)
1. Access the printer driver.
2. Click the Optional Settings...

Note:
❏This function is available only when EPSON Status Monitor is installed.
❏This information might be different from the information displayed in EPSON Status Monitor. Use
EPSON Status Monitor to get more detailed information about consumable products.
❏If the genuine consumable products are not used, the level indicator and the alert icon showing the
remaining service life are not displayed.
Ordering consumable products and maintenance parts
Click the Order Online button on the Basic Settings tab....

3. Click Software List.
Note:
❏See the Network Guide for information on installing EPSON Status Monitor on a network.
❏If you want to use the printer via the print server, you have to install EPSON Status Monitor from
the Software Disc with administrator privileges in each client.
4. Select Epson Status Monitor and then click the Next button.
5. Read the license agreement statement, then click Accept.
6. When the installation is complete, click Cancel.
Accessing EPSON Status Monitor
Click the EPSON...

Note:
❏You can also access EPSON Status Monitor by clicking the Simple Status button on the Optional
Settings tab on the printer driver.
❏The Order Online dialog box also appears by clicking the Order Online button on the Basic Settings
tab in the printer driver.
About You can obtain information about EPSON Status Monitor such as product versions or
interface versions.
Simple Status You can check printer status, errors, and warnings.
Detailed Status
*You can monitor detailed printer status. When a...