Epson AcuLaser M2300D User Manual

Notice Settings
a. Printer
drop-down list:Select your printer from the drop-down list.
b. Monitor the
printing status
check box:When this check box is selected, EPSON Status Monitor monitors t h e  p r i n t e r  s t a t u s  d u r i n g  a
print job is processed.
c Pop-up Notice: Sets the notification to be displayed.
d. Display the Order
Online window
automatically
check box:When this check box is selected, the Order Online window appears automatically when a
consumable becomes low or reaches end of...

g. Monitor Settings
button:Opens the Monitor Settings dialog box to set the monitoring interval.
h. Save button: Saves new changes and closes the dialog box.
Uninstalling the printer software
For Mac OS X users
1. Quit all applications on the computer.
2. Insert the Epson printer Software Disc in your Macintosh.
3. Double-click the Printer folder.
4. Double-click the Driver folder.
5. Double-click your printer’s icon.
Note:
If the Authorization dialog box appears, enter the Password or phrase, then click...

Using the PostScript Printer Driver (Epson AcuLaser M2400/M2410 series
only)
System requirements
Printer hardware requirements
Recommended
MemoryStandard + 64 MB (for duplex printing of image data at Fine)
Note:
Add more memory modules into your printer if the amount of memory currently installed does not meet
your printing needs.
Computer system requirements
Windows
 
Recommended
OSWindows 7, 7 x64, Vista, Vista x64, XP, XP x64, 2000, Server 2008, Server 2008 x64, Server 2003, or
Server 2003 x64...

Using the PostScript printer driver with Windows
To print in the PostScript mode, you will have to install the printer driver. See the appropriate sections
below for installation instructions according to the interface that you are using to print.
Installing the PostScript printer driver for the USB interface or the parallel interface
c
Caution:
Never use EPSON Status Monitor and PostScript 3 driver at the same time when the printer is
connected via a USB port. It may damage the system.
Note:
❏Installing...

6. If the printer is connected to a USB interface, select USB, then click Next, or if the printer is
connected to a parallel interface, select LPT1, then click Next.
7. Click Have Disk and specify the following path for the Software Disc. If your CD-ROM drive is D:,
the path will be D:\ADOBEPS\(your printer name)\PS_SETUP. Then click OK.
Note:
Change the drive letter as needed for your system.
8. Select the printer, then click Next.
9. Follow the on-screen instructions for the rest of the installation....

6. Click Next.
7. Specify the IP address and port name, then click Next.
8. Click Finish.
9. Click Have Disk in the Add Printer Wizard and specify the following path for the Software Disc. If
your CD-ROM drive is D:, the path will be D:\ADOBEPS\(your printer name)\PS_SETUP.
Then click OK.
Note:
Change the drive letter as needed for your system.
10. Select the printer and click Next.
11. Follow the on-screen instructions for the rest of the installation.
12. When installation is done, click Finish....

Using the PostScript printer driver with Macintosh
Installing the PostScript printer driver
Note:
Make sure that no applications are running on your Macintosh before installing the printer driver.
For Mac OS X users
Note:
Make sure that Print & Fax ( f o r  M a c  O S  X  1 0 . 5  o r  l a t e r )  o r  Printer Setup Utility ( f o r  M a c  O S  X  1 0 . 4 )  i s
not open.
1. Insert the printer Software Disc into your CD-ROM drive.
2. Double-click the CD-ROM icon.
3. Double-click Adobe PS, then...

❏You need to make the settings for your installed options manually when the printer is connected
using USB, IP printing, or Bonjour. When the printer is connected using AppleTalk, the printer
software automatically makes the settings.
❏Make sure to specify ASCII as the data format in the application.
1. For Mac OS X 10.5 or later users, open the System Preferences, and then double-click the Print &
Fax icon. 
For Mac OS X 10.4 users, open the Applications folder, open the Utilities folder, and then...

Note for Mac OS X 10.4 users:
If ESC/Page driver is not installed, your printer model is automatically selected in the Printer Model
List when you select your printer from the Name List while the printer is on.
Bonjour
Select your printer, the printer name is followed by (PostScript), from the Name List. Your
printer model is automatically selected in the Printer Model List.
Note for Bonjour users:
If your printer model is not automatically selected in the Printer Model list, you need to reinstall the...

Using the PCL6 printer driver
To print in the PCL mode, you will have to install the printer driver. Consult the customer support in
your region regarding how to get the printer driver and system requirements such as the versions of
supported operating systems.
Epson AcuLaser M2300/M2310/M2400/M2410 Series     User’s Guide
About the Printer Software     150