Epson Aculaser M2010D User Manual

Operating System Versions11
Operating System Versions
In this manual, the following abbreviations are used.
Windows refers to Windows Vista, XP, Vista x64, XP x64, 2000, Server 2003, and Server 2003 x64.
Macintosh refers to Mac OS X.❏Windows Vista refers to Windows Vista Ultimate Edition, Windows Vista Home Premium Edition, Windows Vista 
Home Basic Edition, Windows Vista Enterprise Edition and Windows Vista Business Edition.
❏Windows Vista x64 refers to Windows Vista Ultimate x64 Edition, Windows Vista...

Safety Instructions12
Safety Instructions
Safety
Warnings, Cautions, and Notes
w
Warnings
must be followed carefully to avoid bodily injury.
c
Cautions
must be observed to avoid damage to your equipment.
Notes 
contain important information and useful tips on the operation of your printer.
Safety precautions
Be sure to follow the precautions carefully to ensure safe, efficient operation:
❏Be sure to lift the printer by the correct positions as shown below.
 

Safety Instructions13
❏Be careful not to touch the fuser, which is marked CAUTION HOT SURFACE or the 
surrounding areas. If the printer has been in use, the fuser and the surrounding areas may be 
very hot. If you must touch one of these areas, wait 30 minutes to allow the heat to subside 
before doing so.
1. CAUTION HOT SURFACE
2. Do not insert your hand deep into the fuser unit.
❏Do not insert your hand deep into the fuser unit as some components are sharp and may cause 
injury.
❏Avoid touching the...

Safety Instructions14
❏Be careful not to scratch the surface of the drum. When you remove the photoconductor unit 
from the printer, always place it on a clean, smooth surface. Avoid touching the drum, since oil 
from your skin can permanently damage its surface and affect print quality.
❏To get the best print quality, do not store the toner cartridge in an area subject to direct sunlight, 
dust, salty air, or corrosive gases (such as ammonia). Avoid locations subject to extreme or 
rapid changes in...

Safety Instructions15
❏When connecting this product to a computer or other device with a cable, ensure the correct 
orientation of the connectors. Each connector has only one correct orientation. Inserting a 
connector in the wrong orientation may damage both devices connected by the cable.
❏If you use an extension cord, make sure that the total of the ampere ratings on the products 
plugged into the extension cord does not exceed the extension cord ampere rating.
❏Unplug this printer from the wall...

Safety Instructions16
Safety Information
Power cord
c
Caution:
❏Be sure the AC power cord meets the relevant local safety standards.
Use only the power cord that comes with this product. Use of the another cord may result in fire 
or electric shock.
This product’s power cord is for use with this product only. Use with other equipment may result 
in fire or electric shock.
❏If damage occurs to the plug, replace the cord set or consult a qualified electrician. If there are fuses 
in the plug, make sure you...

Safety Instructions17
Ozone safety
Ozone emission
Ozone gas is generated by laser printers as a by-product of the printing process. Ozone is produced 
only when the printer is printing.
Ozone exposure limit
The recommended exposure limit for ozone is 0.1 parts per million (ppm) expressed as an average 
time-weighted concentration over an eight (8) hour period.
The Epson laser printer generates less than 0.1 ppm for eight (8) hours of continuous printing.
Minimize the risk
To minimize the risk of exposure...

Getting to Know Your Printer18
Chapter 1 
Getting to Know Your Printer
Where to Find Information
Setup Guide
Provides you with information on assembling the printer and installing the printer software.
User’s Guide (this manual)
Provides you with detailed information on the printer’s functions, optional products, maintenance, 
troubleshooting, and technical specifications.
Network Guide (only for the DN model)
Provides network administrators with information on both the printer driver and network...

Getting to Know Your Printer19
Printer Parts
Front view
a. top cover (cover A)
b. control panel
c. standard lower paper cassette
d. MP tray (Multi-Purpose tray)
e. subtray
f. stopper
Rear view
D model
 

Getting to Know Your Printer20
DN model
a. rear cover
b. AC inlet
c. power switch
d. option cover
e. parallel interface connector (only for the D model)
f. USB interface connector
g. network interface connector (only for the DN model)
Note:
This manual uses D model as an example of the rear view illustrations.