Epson AcuLaser M2000DTN User Manual

For a Windows 2000 print server, select Shared as, then type the name in the Share Name box.
4. Select the additional drivers.
Note:
If the computers of the server and clients use the same OS, you do not have to install the
additional drivers. Just click OK after step3.
On the Windows XP, XP x64, or 2000 print server
Click Additional Drivers.
Select Windows being used for clients, then click OK.
Server Name Client OS Driver
Windows 2000 Windows XP or 2000 clients Intel Windows 2000
Windows XP
*Windows XP...

Server Name Client OS Driver
Windows XP x64
*Windows XP or 2000 clients x86 Windows 2000, Windows XP
and Windows Server 2003
Windows XP x64 clients x64 Windows XP and Windows
Server 2003
Windows Vista or Vista x64 Windows Vista, XP, or 2000 clients x86 Type 3 - User Mode
Windows Vista x64 or XP x64 clients x64 Type 3 - User Mode
*The additional driver for Windows XP x64 can be used on Windows XP Service Pack2 or later.
Note:
❏You do not have to install the additional drivers noted below, because these...

Note:
❏To share the printer on a Windows network, you need to set the print server. For details, see
“Using an additional driver” on page 59.
❏This section describes how to access the shared printer on a standard network system using the
server (Microsoft workgroup). If you cannot access the shared printer due to the network system,
ask the administrator of the network for assistance.
❏This section describes how to install the printer driver by accessing the shared printer from the
Printers folder. You...

2. For Windows 2000, double-click the Add Printer icon, then click Next.
For Windows XP or XP x64 click Add a printer in the Printer Tasks menu.
For Windows Vista or Vista x64, click Add a printer in the menu bar.
3. For Windows 2000, select Network printer, then click Next.
For Windows XP or XP x64, select A network printer, or a printer attached to another
computer, then click Next.
For Windows Vista or Vista x64, click Add a network, wireless or Bluetooth printer. If the
shared printer is found...

For Windows XP or XP x64, select Browse for a printer.
For Windows Vista or Vista x64, click Select a shared printer by name in the dialog box
that appears, then click Next.
5. For Windows XP, XP x64, or 2000, click the icon of the computer or server that is connected to
the shared printer, and the name of the shared printer, then click Next.
Note for Windows Vista users:
When the dialog box to enter user name and password appears, enter the information about the
print server, then click the name of the...

Note:
❏The name of the shared printer may be changed by the computer or server that is connected
to the shared printer. To make sure of the name of the shared printer, ask the administrator
of the network.
❏If the printer driver is installed in the client beforehand, you need to select either the new
printer driver or the current printer driver. When the prompt to select the printer driver
appears, select the printer driver according to the message.
❏If the additional driver for the corresponding Windows...

❏If the additional drivers are installed or the computers of the server and clients use the same OS,
you do not have to install the printer drivers from the CD-ROM.
1. Access the shared printer and a prompt may appear. Click OK, then follow the on-screen
instructions to install the printer driver from the CD-ROM.
2. Insert the CD-ROM, type the appropriate drive and folder names in which the printer driver
for clients is located, then click OK.
When installing drivers, “Digital Signature is not found.”...

The computers on the network can share the printer that is directly connected to one of them. The
computer that is directly connected to the printer is the print server, and the other computers are
the clients which need permission to share the printer with the print server. The clients share the
printer via the print server.
For Mac OS X users
Use the Printer Sharing setting, which is a standard feature of Mac OS X 10.2 or later.
See your operating system’s documentation for details.
EPSON AcuLaser...

Chapter 6
Replacing Consumable Products
Precautions During Replacement
Always observe the following handling precautions when replacing consumable products:
❏Provide enough space for the replacement procedure. You will have to open some parts (such
as the printer cover) of the printer when you are replacing consumables.
❏Do not install used consumable products into the printer.
w
Warning:
❏Be careful not to touch the fuser, which is marked CAUTION Hot Surface, or the
surrounding areas. If the printer has...

❏If you move a developer cartridge from a cool to a warm environment, wait for at least one
hour before installing it to prevent damage from condensation.
w
Warning:
❏Do not touch the toner in developer cartridges. Always keep toner away from your eyes. If
toner gets on your skin or clothes, wash it off with soap and water immediately.
❏Keep developer cartridges out of the reach of children.
❏Do not dispose of used developer cartridges in fire, as they may explode and cause injury.
Dispose of them...