Epson AcuLaser M2000DN User Manual

5
More Settings buttonAllows to you change more settings.
Note: 
If you change the settings, they are applied to all printers that have the
same user interface.
6
OK buttonSaves new changes.
7
Cancel buttonCancels any changes.
8
Help buttonOpens online help for the Monitoring Preferences dialog box.
Note for Windows Vista users:
When Allow monitoring of the shared printers check box is selected, the User Account Control
dialogbox will appear. Then click Continue to make the settings.
Order Online...

5
Do not display this
window automatically
check boxWhen this check box is selected, the Order Online window appears
automatically only when a replacement part first becomes low or reaches
end of service life.
More Settings (AcuLaser M1200/EPL-6200L)
You can monitor over routers or use the SMB protocol for communication to monitor Windows
shared printers.
1 Use SMB for communication You can monitor using both Winsock1.1 and SMB if you select the Use
SMB for communication check box. If you do not select...

If you wish to see information about printer consumables, click Consumables. Once this button
is clicked, the Status Alert window will not disappear even after a problem is cleared. To close the
box, you need to click Close.
Stopping monitoring
You can stop monitoring the printing status by clearing the Monitor the Printing Status check
box in the printer driver’s Utility menu (EPL-6200) or the Extended Settings dialog box (AcuLaser
M1200/EPL-6200L) if you don’t need to monitor the printer at all.
Note:...

For Windows Vista, XP, and 2000, select the USBXXX USB port in the list on the Ports tab.
Note:
This screen may vary depending on your operating system version.
4. Click OK to save the settings.
Canceling Printing
If the printouts are not what you expected and contain incorrect or garbled characters or images,
you may need to cancel printing.
From the computer
To cancel printing from the computer, you can use either the spooler or the EPSON Status
Monitor 3 window.
Cancelling from the spooler
When the...

Double-click the printer icon on the task bar. Select the task in the list, then click Cancel from
under the Document menu.
After the last page is output, the Ready light on the printer turns on.
The current job is canceled.
Cancelling from the EPSON Status Monitor 3 window (AcuLaser M1200/EPL-6200L)
You can cancel printing from EPSON Status Monitor 3.
Note:
EPSON Status Monitor 3 is automatically installed together with the printer driver. To be able to
cancel printing from EPSON Status Monitor 3 with...

Note for AcuLaser M1200 and EPL-6200L:
The printer driver and EPSON Status Monitor 3 are installed simultaneously, and cannot be
uninstalled separately. Not all the steps below are required for the uninstallation.
1. Quit all applications.
2. For Windows Vista, click Start, then click Control Panel.
For Windows XP, click Start, click Control Panel, then double-click Add or Remove
Programs.
For Windows 2000, click Start, point to Settings, then click Control Panel.
3. For Windows Vista, double-click the...

5. Click the Printer Model tab, and then select the printer icon.
Note:
If your printer is the AcuLaser M1200 or EPL-6200L, click OK, and proceed directly to step 8.
6. Click the Utility tab, and confirm that the EPSON Status Monitor 3 check box is selected.
Note:
Select the EPSON Status Monitor 3 check box only when you are uninstalling the EPSON Status
Monitor 3 as well.
7. If you want to uninstall the Monitored Printers utility, select the EPSON Status Monitor 3:
Monitored Printers check box and click...

Chapter 4
Using the Printer Driver For Macintosh
About the Printer Software
The printer driver lets you choose from a wide variety of settings to get the best results from your
printer, while the EPSON Status Monitor 3 lets you check the status of your printer.
The printer driver is included in the CD-ROM that shipped with your printer. For instructions on
installing the printer driver, see the Setup Guide.
System Requirements
To use the printer software, your Macintosh must be running one of the...

Mac OS X
To access the printer driver, register your printer in Print & Fax (for Mac OS X 10.5), Printer
Setup Utility (for Mac OS X 10.3 and 10.4) or Print Center (for Mac OS X 10.2), click Print on
the File menu of any application, then select your printer.
From an application
❏To open the Paper Setting dialog box, select Page Setup from the File menu on any application.
❏To open the Basic Settings tab, select Print from the File menu on any application.
Note:
The printer driver’s online help provides...

Note:
Print quality will decrease when you use this function.
1. Open the Extension Settings dialog box.
2. Select the Avoid Insufficient Memory Error check box.
Printing watermarks (AcuLaser M1200 only)
This function allows you to print a text-based or image-based watermark on your document.
For Mac OS X 10.5 users
1. Open the print dialog box.
2. Select Printer Settings from the drop-down list and click the Stamp Function button.
3. Select the Watermark Settings tab.
4. Select the Watermark check box....