Epson AcuLaser CX21NF User Manual

Faxing (Fax Model Only)231
3. Press the uUp or dDown button several times until SpeedDial Settings appears, 
then press the rRight button.
4. Press the dDown button to select One-Touch Dial, and then press the rRight button.
The One-Touch Dial list appears.
5. Press the dDown button to select one-touch dial A, B, or C displayed as 
Unregistered, and then press the rRight button.
6. Press the dDown button to select a recipient you want to assign for the One Touch 
Dial, and then press the rRight button....

Faxing (Fax Model Only)232
The Setup light is lit and the Setup menu appears in the LCD panel.
2. Press the dDown button twice to select Fax Settings, then press the rRight button.
The Fax Settings menu appears.
3. Press the uUp or dDown button several times until SpeedDial Settings is selected, 
then press the rRight button.
4. Press the dDown button to select One-Touch Dial, and then press the rRight button.
The One-Touch Dial list appears.
5. Press the dDown button to select one-touch dial A, B, or C...

Faxing (Fax Model Only)233
Deleting recipients
You can delete recipients from the assigned One Touch Dial button A, B, or C.
1. Make sure the product is turned on, and then press the  Setup button.
The Setup light is lit and the Setup menu appears in the LCD panel.
2. Press the dDown button twice to select Fax Settings, then press the rRight button.
The Fax Settings menu appears.
3. Press the uUp or dDown button several times until SpeedDial Settings appears, 
then press the rRight button.
4. Press the...

Faxing (Fax Model Only)234
The recipient assigned for the one-touch dial is deleted.
 

Using the Control Panel235
Chapter 11 
Using the Control Panel
Selecting a Mode
You can use this product as a printer, copier, fax, and scanner. When the product is turned 
on, it enters the Print mode automatically. When using one of these functions, select your 
desired function by pressing the corresponding mode button on the control panel. Each 
mode’s main screen appears in the LCD panel as you select the mode.
There are three mode buttons on the control panel that allow you to switch between the...

Using the Control Panel236
Print mode
The default mode of this product is Print mode. While the product is in Print mode, the Print 
light (green) is lit and the following screen appears.
Note:
During the printing process, you cannot access other modes.
Copy mode
To use the copy function, press the  Copy button on the control panel to enter the Copy 
mode. While the product is in Copy mode, the following screen appears.
Note:
❏Fax reception is available even while copying.
❏If you press the  Copy button...

Using the Control Panel237
Fax mode (fax model only)
To use the fax function, press the  Fax button on the control panel to enter the Fax 
mode. While the product is in Fax mode, the following screen appears.
Note:
❏If no button is pressed for more than 3 minutes, any changes made are canceled and the mode 
returns to the Print mode.
❏If you press the  Fax button while in Fax mode, the screen returns to the Print mode. 
❏Even in Fax mode, TWAIN scan (only when the scanner is not operating) and printing...

Using the Control Panel238
Using the Setup Menu
This section describes how to use the Setup menu, and when it is appropriate to make 
product settings using the Setup menu screen. You can use the Setup menu in the LCD 
panel to access a variety of menus that allow you to make product settings. 
When to make Setup menu settings
You can make the following settings for copying, faxing, scanning, and printing on the 
Setup menu. 
Setup menu Setting items
Printer Settings Use this menu to make the following...

Using the Control Panel239
For Printer Settings:
In general, Printer Settings can be made from the printer driver, and do not need to be 
made using the Setup menu. In fact, printer driver settings override settings made using 
the Setup menu, so use the Setup menu only to make settings you cannot make in your 
software or printer driver.
How to access the Setup menu settings
For a complete description of the items and settings available in the Setup menu, see 
Setting menus on page 240.
1. Make sure the...

Using the Control Panel240
3. Use the uUp and dDown buttons to scroll through the items, and then press the 
rRight button to carry out the operation indicated by the selected item, or to view the 
settings available for the item.
Note:
❏To return to the previous (higher) level, press the lLeft button.
❏The * asterisk mark indicates the current setting value.
4. Exit the Setup menu.
To switch to another mode, use the following method.
❏Press the  Copy,  Fax, or  Scan button to switch to the corresponding...