Epson AcuLaser C9100 User Manual

Paper Handling31
2
2
2
2
2
2
2
2
2
2
2
2
Chapter 2
Paper Handling
Paper Sources
This section describes the combinations of paper sources and 
paper types that you can use. 
MP tray
Paper Type Paper Size Capacity
Plain paper/ 
Semi-ThickA4, A5, B5, Letter (LT),
Half-Letter (HLT),
Government Letter (GLT),
Executive (EXE)
Custom-size paper:
90 × 98 mm minimum
297 × 216 mm maximumUp to 150 sheets 
(Total thickness: up to 
18 mm thick stack)
A3, B4, Ledger (B),
Legal (LGL), Government 
Legal (GLG),
F4...

32Paper Handling
* When loading a long-size paper, hold the paper with both hands.Thick paper/ 
Extra thick paperA4, A5, B5, Letter (LT),
Half-Letter (HLT),
Government Letter (GLT),
Executive (EXE)Up to 18 mm thick 
stack
A3, B4, Ledger (B),
Legal (LGL), 
Government Legal (GLG)Up to 10 mm thick 
stack
EPSON Color 
Laser PaperA4 Up to 150 sheets
(Total thickness: up to 
18 mm thick stack)
A3 Up to 100 sheets
(Total thickness: up to 
10 mm thick stack)
EPSON Color 
Laser 
TransparenciesA4, Letter (LT) Up...

Paper Handling33
2
2
2
2
2
2
2
2
2
2
2
2
Standard lower cassette
Optional paper cassette unit
Paper Type Paper Size Capacity
Plain paper/ 
Semi-ThickA3, B4, A4, A5, B5, 
Legal (LGL), Letter (LT),
Government Legal 
(GLG), Ledger (B),
Executive (EXE)Up to 500 sheets
(Total thickness: up to 
54 mm thick stack)
EPSON Color Laser 
PaperA3, A4
Paper Type Paper Size Capacity
Plain paper/ 
Semi-ThickA3, B4, A4, B5, Legal 
(LGL), Government 
Legal (GLG), Letter 
(LT), Ledger (B)Up to 500 sheets in each 
cassette...

34Paper Handling
Selecting a paper source
You can specify a paper source manually, or set the printer to 
select the paper source automatically.
Manual selection
You can use the printer driver or the printer’s control panel to 
select a paper source manually.
To access the printer driver, for Windows, see “Accessing the 
printer driver” on page 53, or for Macintosh, see “Accessing the 
printer driver” on page 120. 
And to use the printer’s control panel, see “Using the Control 
Panel Menus” on page 338:...

Paper Handling35
2
2
2
2
2
2
2
2
2
2
2
2
Auto selection
You can use the printer driver or the printer’s control panel to 
select a paper source containing the appropriate size of paper 
automatically. To access the printer driver, for Windows, see 
“Accessing the printer driver” on page 53, or for Macintosh, see 
“Accessing the printer driver” on page 120. And to use the 
printer’s control panel, see “Using the Control Panel Menus” on 
page 338:
❏Using the printer driver
For Windows users:
Access the...

36Paper Handling With Optional 500-sheet/1500-sheet Paper Cassette Unit A3 
installed:
MP tray
Lower Cassette 1
Lower Cassette 2
Lower Cassette 3
Lower Cassette 4
Note:
❏If you make paper size settings or paper source settings in your 
application, these settings may override the printer driver settings.
❏If you select an envelope for the Paper Size setting, it can be fed only 
from the MP tray regardless of the Paper Source setting.
❏You can change the priority of the MP tray by using the MP Mode...

Paper Handling37
2
2
2
2
2
2
2
2
2
2
2
2
Loading Paper
This section describes how to load paper. If you use special media 
such as transparencies or envelopes, see also “Printing on Special 
Media” on page 45.
MP tray
The MP tray is the most flexible paper source, accommodating 
various paper sizes and media types. For information on the 
paper sizes and types supported by the MP tray, see “Paper 
Sources” on page 31.
Follow the steps below to load paper.
1. Open the MP tray, then pull out the expansion...

38Paper Handling 2. Slide the paper guides outward wider than the paper width.
3. Load a stack of the desired media with the printable surface 
facing down, and gently push the paper until it stops.
c
Caution:
❏Different sizes or types of paper cannot be loaded all 
together on the MP tray. Doing so may cause a paper 
jam.
❏Do not load a stack of paper that exceeds the upper limit 
line. It may cause a paper jam or printer breakdown.
❏When loading long-size paper with the MP tray, see 
“Loading Long-size...

Paper Handling39
2
2
2
2
2
2
2
2
2
2
2
2
4. Slide the paper guides to fit the paper.
5. Select the Paper Source and Paper Size settings that match 
the loaded media by using the printer driver or the printer’s 
control panel.
❏For Windows users, see “Making the print quality 
settings” on page 55.
❏For Macintosh users, see “Making the print quality 
settings” on page 122.
Note:
When loading paper with the MP tray, you need to specify the paper 
size as the printer does not detect the paper size...

40Paper Handling 2. Slide the paper guides outward wider than the paper width.
3. Load a stack of long-size paper with the printable surface 
facing down by holding the paper with both hands as shown 
below.
c
Caution:
Do not curl the paper end when loading it. Feeding curled 
paper may cause the paper to jam or to be folded.
Note:
When loading long-size paper on the MP tray, load one sheet at a 
time.